-
Improvement of the electrocaloric effect and energy storage performances in Pb-free ferroelectric Ba0.9Sr0.1Ti0.9Sn0.1O3 ceramic near room temperature
Authors:
S. Khardazi,
H. Zaitouni,
S. Belkhadir,
D. Mezzane,
M. Amjoud,
Y. Gagou,
B. Asbani,
I. Lukyanchuk,
S. Terenchuk
Abstract:
Perovskite-type Ba0.9Sr0.1Ti0.9Sn0.1O3(BSTSn) ceramic was synthesized by the sol gel method. The P E hysteresis loops were recorded at different temperatures to investigate the ferroelectric and energy storage properties of BSTSn ceramic. Enhanced recoverable energy density and high energy storage efficiency were found to be 58.08 mJ/cm3 and 84.36 %, respectively at room temperature (RT) under a m…
▽ More
Perovskite-type Ba0.9Sr0.1Ti0.9Sn0.1O3(BSTSn) ceramic was synthesized by the sol gel method. The P E hysteresis loops were recorded at different temperatures to investigate the ferroelectric and energy storage properties of BSTSn ceramic. Enhanced recoverable energy density and high energy storage efficiency were found to be 58.08 mJ/cm3 and 84.36 %, respectively at room temperature (RT) under a moderate applied electric field of 20 kV/cm. The electrocaloric effect (ECE) in the BSTSn ceramic was explored using two different approaches based on P E hysteresis loops, and pyroelectric current measurements. The largest electrocaloric (EC) temperature change of 0.63 K was determined using the Maxwell relationship obtained near RT under 20 kV/cm. The corresponding EC responsivity value of 0.31 K.mm/kV is one of the highest reported values in lead-free ferroelectrics near RT. This study demonstrates that the BSTSn ceramic is a promising candidate for solid-state cooling and energy storage applications.
△ Less
Submitted 11 June, 2023;
originally announced June 2023.
-
Enhancing the dielectric, electrocaloric and energy storage properties of lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics prepared via sol-gel process
Authors:
H. Mezzourh,
S. Belkhadir,
D. Mezzane,
M. Amjoud,
E. Choukri,
A. Lahmar,
Y. Gagou,
Z. Kutnjak,
M. El Marssi
Abstract:
The Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ceramics were successfully prepared by sol-gel process, and sintered at 1420 degree. The effect of sintering times (2, 4 and 6 h) on structural, microstructural, electric properties, energy storage, and electrocaloric effect was systematically examined. X-ray diffraction (XRD) results show that all the samples crystallize in the pure perovskite structure. The mo…
▽ More
The Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ceramics were successfully prepared by sol-gel process, and sintered at 1420 degree. The effect of sintering times (2, 4 and 6 h) on structural, microstructural, electric properties, energy storage, and electrocaloric effect was systematically examined. X-ray diffraction (XRD) results show that all the samples crystallize in the pure perovskite structure. The morphotropic phase transition from the tetragonal to the orthorhombic phase (T-O) was identified and confirmed by Rietveld refinement. The BCZT ceramic sintered at 1420 degree for 4h possesses a good relative density of 98%, and exhibits optimal properties with a high dielectric permittivity ~16310, a large electrocaloric effect coefficient ~ 0.244Kmm/kV and an energy density storage of ~ 10.61 mJ/cm3.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Structural, dielectric and electrocaloric properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1-xSnx)O3 ceramics elaborated by sol-gel method
Authors:
Saad Belkhadir,
Aziz Neqali,
Mbarek Amjoud,
Daoud Mezzane,
Abdelhadi Alimoussa,
Elhassan Choukri,
Yaovi Gagou,
Igor Raevski,
Mimoun ElMarssi,
Igor Lukyanchuk,
Brigita Rozic,
Zdravko Kutnjak
Abstract:
Ferroelectric ceramics (Ba0.85Ca0.15)(Ti0.9Zr0.1-xSnx)O3 (x=0.00, 0.02, 0.04, 0.06) were prepared by a sol-gel method. Structural investigation revealed the co-existence of tetragonal (P4mm) and orthorhombic (Pmm2) symmetries at room temperature for the undoped ceramic, while only a tetragonal structure (P4mm) was observed for the doped ceramics. Dielectric measurements indicate a dielectric relax…
▽ More
Ferroelectric ceramics (Ba0.85Ca0.15)(Ti0.9Zr0.1-xSnx)O3 (x=0.00, 0.02, 0.04, 0.06) were prepared by a sol-gel method. Structural investigation revealed the co-existence of tetragonal (P4mm) and orthorhombic (Pmm2) symmetries at room temperature for the undoped ceramic, while only a tetragonal structure (P4mm) was observed for the doped ceramics. Dielectric measurements indicate a dielectric relaxation process at high temperatures which is essentially related to the hopping of oxygen vacancies. Furthermore, a down shifting of the Curie temperature (TC) with increasing Sn4+ doping rate has been revealed. The temperature profiles of the Raman spectra unveiled the existence of polar nanoregions (PNRs) above the Curie temperature in all ceramics. The ferroelectric properties were found to be related to the microstructure. Electrocaloric effect was investigated in this system that revealed an electrocaloric responsivity of 0.225 10-6 K m/V for the composition with x = 0.04 Sn doping, where other remarkable physical properties were also observed.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Structural, dielectric and magnetic properties of multiferroic (1-x) La0.5Ca0.5MnO3-(x) BaTi0.8Sn0.2O3 laminated composites
Authors:
S. Ben Moumen,
Y. Gagou,
S. Belkhadir,
D. Mezzane,
M. Amjoud,
B. Rozic,
L. Hajji,
Z. Kutnjak,
Z. Jaglicic,
M. Jagodic,
M. El Marssi,
Y. Kopelevich,
Igor A. Luk yanchuk
Abstract:
High performance lead-free multiferroic composites are desired to replace the lead-based ceramics in multifunctional devices applications. Laminated compounds were prepared from ferroelectric and ferromagnetic materials. In this work, we present laminated ceramics compound by considering the ferromagnetic La0.5Ca0.5MnO3 (LCMO) and the ferroelectric BaTi0.8Sn0.2O3 (BTSO) in two different proportion…
▽ More
High performance lead-free multiferroic composites are desired to replace the lead-based ceramics in multifunctional devices applications. Laminated compounds were prepared from ferroelectric and ferromagnetic materials. In this work, we present laminated ceramics compound by considering the ferromagnetic La0.5Ca0.5MnO3 (LCMO) and the ferroelectric BaTi0.8Sn0.2O3 (BTSO) in two different proportions. Compounds (1-x) LCMO-(x) BTSO with x=1 and 0 (pure materials) were synthesized by the sol gel method and x=0.7 and 0.5 (laminated) compounds were elaborated by welding appropriate mass ratios of each pure material by using the silver paste technique. Structural, dielectric, ferroelectric, microstructure and magnetic characterization were conducted on these samples. X-ray scattering results showed pure perovskite phases confirming the successful formation of both LCMO and BTSO. SEM images evidenced the laminated structure and good quality of the interfaces. The laminated composite materials have demonstrated a multiferroic behavior characterized by the ferroelectric and the ferromagnetic hysteresis loops. Furthermore, the enhancement of the dielectric constant in the laminated composite samples is mainly attributed to the Maxwell-Wagner polarization.
△ Less
Submitted 3 October, 2019;
originally announced October 2019.
