-
Optically Pumped Polarized $^3$He$^{++}$ Ion Source Development for RHIC/EIC
Authors:
A. Zelenski,
G. Atoian,
E. Beebe,
S. Ikeda,
T. Kanesue,
S. Kondrashev,
J. Maxwell,
R. Milner,
M. Musgrave,
M. Okamura,
A. A. Poblaguev,
D. Raparia,
J. Ritter,
A. Sukhanov,
S. Trabocchi
Abstract:
The proposed polarized $^3$He$^{++}$ acceleration in RHIC and the future Electron-Ion Collider will require about $2\times10^{11}$ ions in the source pulse. A new technique had been proposed for production of high intensity polarized $^3$He$^{++}$ ion beams. It is based on ionization and accumulation of the $^3$He gas (polarized by metastability-exchange optical pumping and in the 5 T high magneti…
▽ More
The proposed polarized $^3$He$^{++}$ acceleration in RHIC and the future Electron-Ion Collider will require about $2\times10^{11}$ ions in the source pulse. A new technique had been proposed for production of high intensity polarized $^3$He$^{++}$ ion beams. It is based on ionization and accumulation of the $^3$He gas (polarized by metastability-exchange optical pumping and in the 5 T high magnetic field) in the existing Electron Beam Ion Source (EBIS). A novel $^3$He cryogenic purification and storage technique was developed to provide the required gas purity. An original gas refill and polarized $^3$He gas injection to the EBIS long drift tubes, (which serves as the storage cell) were developed to ensure polarization preservation. An infrared laser system for optical pumping and polarization measurements in the high 3--5 T field has been developed. The $^3$He polarization 80--85\% (and sufficiently long $\sim30$ min relaxation time) was obtained in the \lq\lq{open}\rq\rq\ cell configuration with refilling valve tube inlet and isolation valve closed. The development of the spin-rotator and $^3$He $^4$He absolute nuclear polarimeter at 6 MeV $^3$He$^{++}$ beam energy is also presented.
△ Less
Submitted 7 July, 2023; v1 submitted 18 March, 2023;
originally announced March 2023.
-
Enhanced Polarization of Low Pressure $^3$He through Metastability-Exchange Optical Pumping at High Field
Authors:
J. D. Maxwell,
J. Alessi,
G. Atoian,
E. Beebe,
C. S. Epstein,
R. G. Milner,
M. Musgrave,
A. Pikin,
J. Ritter,
A. Zelenski
Abstract:
We report high steady-state nuclear polarization of 1 torr $^3$He gas nuclei via metastability-exchange optical pumping at magnetic fields above 2 T. The introduction of highly polarized $^3$He gas into Brookhaven's Electron Beam Ion Source would enable a new, polarized $^3$He ion source for use at the Relativistic Heavy Ion Collider and a future Electron-Ion Collider facility. By adapting recent…
▽ More
We report high steady-state nuclear polarization of 1 torr $^3$He gas nuclei via metastability-exchange optical pumping at magnetic fields above 2 T. The introduction of highly polarized $^3$He gas into Brookhaven's Electron Beam Ion Source would enable a new, polarized $^3$He ion source for use at the Relativistic Heavy Ion Collider and a future Electron-Ion Collider facility. By adapting recent developments in high field metastability-exchange optical pumping for higher pressure gas, we have successfully polarized 1 torr $^3$He sealed cells in the EBIS solenoid. Through careful manipulation of the RF discharge parameters, polarizations above 80% were attained at 2, 3 and 4 T, with 89% being reached at 3 T with a 664 s relaxation time.
△ Less
Submitted 11 April, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Conceptual design report on a charge breeder for HIE-ISOLDE
Authors:
Andrey Shornikov,
Edward Beebe,
Martin Breitenfeldt,
Johanna Pitters,
Robert Mertzig,
Alexander Pikin,
Fredrik Wenander
Abstract:
In this conceptual design report the possible options for an upgrade of the REX/HIE-ISOLDE charge breeder are discussed. The performance requirements imposed by standard HIE-ISOLDE physics as well as injection into a possible future TSR@ISOLDE are discussed, and thereafter translated into machine parameters. Experimental results from tests of a high-current and high-density electron gun performed…
▽ More
In this conceptual design report the possible options for an upgrade of the REX/HIE-ISOLDE charge breeder are discussed. The performance requirements imposed by standard HIE-ISOLDE physics as well as injection into a possible future TSR@ISOLDE are discussed, and thereafter translated into machine parameters. Experimental results from tests of a high-current and high-density electron gun performed at Brookhaven National Laboratory are presented, and alternative gun designs are discussed. Finally, a cost estimate is given together with possible beneficiaries of the on-going R&D, and potential collaboration partners are identified.
△ Less
Submitted 3 January, 2017;
originally announced January 2017.
-
High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications
Authors:
Andrey Shornikov,
Edward N. Beebe,
Robert C. Mertzig,
Alexander Pikin,
Fredrik J. C. Wenander
Abstract:
We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, th…
▽ More
We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2-3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5-1 Hz is between 10 and 20 kA/cm2, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed electron beam of 1.5 A and 30 keV was demonstrated in a joint experiment with BNL [2]. In addition, we report on further development aiming to achieve CW operation of an electron beam having a geometrical transverse ion-acceptance matching the injection of 1+ ions (11.5 μm), and an emittance/energy spread of the extracted ion beam matching the downstream mass separator and RFQ (0.08 μm normalized / +/- 1% ).
△ Less
Submitted 9 September, 2014;
originally announced September 2014.
