-
Non-Newtonian effects on draw resonance in film casting
Authors:
Mathias Bechert
Abstract:
In this paper, the influence of non-Newtonian material properties on the draw resonance instability in film casting is investigated. Viscoelastic models of infinite width film casting are derived systematically following an asymptotic expansion and using two well-known constitutive equations: the Giesekus model and the simplified Phan-Thien/Tanner~(PTT) model. Based on a steady state analysis, a n…
▽ More
In this paper, the influence of non-Newtonian material properties on the draw resonance instability in film casting is investigated. Viscoelastic models of infinite width film casting are derived systematically following an asymptotic expansion and using two well-known constitutive equations: the Giesekus model and the simplified Phan-Thien/Tanner~(PTT) model. Based on a steady state analysis, a numerical boundary condition for the inlet stresses is formulated, which suppresses the unknown deformation history of the die flow. The critical draw ratio in dependence of both the Deborah number and the nonlinear parameters is calculated by means of linear stability analysis. For both models, the most unstable instability mode may switch under variation of the control parameters, leading to a non-continuous change in the oscillation frequency at criticality. The effective elongational viscosity, which depends exclusively on the local Weissenberg number, is analyzed and identified as crucial quantity as long as the Deborah number is not too high. This is demonstrated by using a generalized Newtonian fluid model to approximate the PTT model. Based on such a generalized Newtonian fluid model, the effects of strain hardening and strain thinning are finally explored, revealing two opposing mechanisms underlying the non-Newtonian stability behavior.
△ Less
Submitted 20 March, 2020; v1 submitted 10 January, 2020;
originally announced January 2020.
-
Unraveling radial dependency effects in fiber thermal drawing
Authors:
Alexis G. Page,
Mathias Bechert,
François Gallaire,
Fabien Sorin
Abstract:
Fiber-based devices with advanced functionalities are emerging as promising solutions for various applications in flexible electronics and bioengineering. Multimaterial thermal drawing, in particular, has attracted strong interest for its ability to generate fibers with complex architectures. Thus far, however, the understanding of its fluid dynamics has only been applied to single material prefor…
▽ More
Fiber-based devices with advanced functionalities are emerging as promising solutions for various applications in flexible electronics and bioengineering. Multimaterial thermal drawing, in particular, has attracted strong interest for its ability to generate fibers with complex architectures. Thus far, however, the understanding of its fluid dynamics has only been applied to single material preforms for which higher order effects, such as the radial dependency of the axial velocity, could be neglected. With complex multimaterial preforms, such effects must be taken into account, as they can affect the architecture and the functional properties of the resulting fiber device. Here, we propose a versatile model of the thermal drawing of fibers, which takes into account a radially varying axial velocity. Unlike the commonly used cross section averaged approach, our model is capable of predicting radial variations of functional properties caused by the deformation during drawing. This is demonstrated for two effects observed, namely, by unraveling the deformation of initially straight, transversal lines in the preform and the dependence on the draw ratio and radial position of the in-fiber electrical conductivity of polymer nanocomposites, an important class of materials for emerging fiber devices. This work sets a thus far missing theoretical and practical understanding of multimaterial fiber processing to better engineer advanced fibers and textiles for sensing, health care, robotics, or bioengineering applications.
△ Less
Submitted 31 July, 2019; v1 submitted 4 February, 2019;
originally announced March 2019.
-
Controlling transport dynamics of confined asymmetric fibers
Authors:
M. Bechert,
J. Cappello,
M. Daïeff,
F. Gallaire,
A. Lindner,
C. Duprat
Abstract:
Transport properties of particles in confining geometries show very specific characteristics as lateral drift, oscillatory movement between lateral walls or the deformation of flexible fibers. These dynamics result from viscous friction with transversal and lateral channel walls inducing strong flow perturbations around the particles that act like moving obstacles. In this paper, we modify the fib…
▽ More
Transport properties of particles in confining geometries show very specific characteristics as lateral drift, oscillatory movement between lateral walls or the deformation of flexible fibers. These dynamics result from viscous friction with transversal and lateral channel walls inducing strong flow perturbations around the particles that act like moving obstacles. In this paper, we modify the fiber shape by adding an additional, small fiber arm, which leads to T and L shaped fibers with only one or, respectively, zero symmetry axes and investigate the transport properties. For this purpose, we combine precise microfluidic experiments and numerical simulations based on modified Brinkman equations. Even for small shape perturbations, the transport dynamics change fundamentally and formerly stable configurations become unstable, leading to non-monotonous fiber rotation and lateral drift. Our results show that the fundamental transport dynamics change with respect to the level of fiber symmetry, which thus enables a precise control of particle trajectories and which can further be used for targeted delivery, particle sorting or capture inside microchannels.
△ Less
Submitted 2 April, 2020; v1 submitted 2 March, 2019;
originally announced March 2019.
-
Transport of flexible fibers in confined micro-channels
Authors:
Jean Cappello,
Mathias Bechert,
Camille Duprat,
Olivia du Roure,
François Gallaire,
Anke Lindner
Abstract:
When transported in confined geometries rigid fibers show interesting transport dynamics induced by friction with the top and bottom walls. Fiber flexibility causes an additional coupling between fiber deformation and transport and is expected to lead to more complex dynamics. A first crucial step for their understanding is the characterization of the deformed fiber shape. Here we characterize thi…
▽ More
When transported in confined geometries rigid fibers show interesting transport dynamics induced by friction with the top and bottom walls. Fiber flexibility causes an additional coupling between fiber deformation and transport and is expected to lead to more complex dynamics. A first crucial step for their understanding is the characterization of the deformed fiber shape. Here we characterize this shape for a fiber transported in a confined plug flow perpendicular to the flow direction using a combination of microfluidic experiments and numerical simulations. In the experiments, size, initial orientation, and mechanical properties of the fibers are controlled using micro-fabrication techniques and in-situ characterization methods.The numerical simulations use modified Brinkman equations as well as full 3D simulations. We show that the bending of a perpendicular fiber results from the force distribution acting on the elongated object and is proportional to the elasto-viscous number, comparing viscous to elastic forces. We quantitatively characterize the influence of the confinement on the fiber deformation. The precise understanding of the deformation of a flexible fiber in a confined geometry can also be used in future to understand the deformation and transport of more complex deformable particles in confined flows, as for example vesicles or red blood cells.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
