-
Measurements of Fusion Yield on the Centrifugal Mirror Fusion Experiment
Authors:
John L. Ball,
Shon Mackie,
Jacob G. van de Lindt,
Willow Morrissey,
Artur Perevalov,
Zachary Short,
Nicholas Schwartz,
Timothy W. Koeth,
Brian L. Beaudoin,
Carlos A. Romero-Talamas,
John Rice,
R. Alex Tinguely
Abstract:
The Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland, College Park is a rotating mirror device that utilizes a central cathode to generate a radial electric field which induces a strongly sheared azimuthal $E\times B$ flow to improve plasma confinement and stability. The fusion yield of CMFX plasmas is assessed by diagnosis of neutron emission for the first time. The total…
▽ More
The Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland, College Park is a rotating mirror device that utilizes a central cathode to generate a radial electric field which induces a strongly sheared azimuthal $E\times B$ flow to improve plasma confinement and stability. The fusion yield of CMFX plasmas is assessed by diagnosis of neutron emission for the first time. The total neutron yield is measured with two xylene (EJ-301) and deuterated-xylene (EJ-301D) liquid scintillator detectors absolutely calibrated with an in silico method. A larger xylene scintillator was cross-calibrated and used to measure the time dynamics of the fusion rate under various experimental conditions. A permanently installed $^3$He gas tube detector was independently calibrated with a Cf-252 neutron source to make total yield measurements and provide an independent validation of the scintillator calibration. An interpretive modeling framework was developed using the 0D code MCTrans++ (Schwartz et al 2024 JPP) to infer undiagnosed plasma parameters such as density, temperature, and confinement time. A peak neutron emission rate of 8.4$\times 10^{6}$ $\pm$ 7.0$\times 10^{5}$ was measured (neglecting modeling uncertainties), with an inferred triple product of 1.9~$\times~10^{17}$ $\mathrm{m^{-3}}$ keV s from 0D modeling.
△ Less
Submitted 28 May, 2025;
originally announced May 2025.
-
Ultrashort-pulse-pumped, single-mode type-0 squeezers in lithium niobate nanophotonics
Authors:
Martin Houde,
Liam Beaudoin,
Kazuki Hirota,
Rajveer Nehra,
Nicolás Quesada
Abstract:
We present design principles for ultrashort-pulse, type-0 phase-matched optical parametric amplifiers to generate and measure spectrally pure degenerate squeezed light. We achieve a Schmidt number of $K \approx 1.02$ with squeezing levels greater than 15 dB spanning over $>5$ THz bandwidth with cm-scale devices on thin-film lithium niobate (TFLN) on insulator platform. Our work opens up promising…
▽ More
We present design principles for ultrashort-pulse, type-0 phase-matched optical parametric amplifiers to generate and measure spectrally pure degenerate squeezed light. We achieve a Schmidt number of $K \approx 1.02$ with squeezing levels greater than 15 dB spanning over $>5$ THz bandwidth with cm-scale devices on thin-film lithium niobate (TFLN) on insulator platform. Our work opens up promising avenues for large-scale circuits for ultrafast quantum information processing and quantum sensing applications on rapidly advancing TFLN platform with already demonstrated linear components and photodetection capabilities.
△ Less
Submitted 23 December, 2024;
originally announced December 2024.
-
Imaging High Jitter, Very Fast Phenomena: A Remedy for Shutter Lag
Authors:
Noah Hoppis,
Kathryn M. Sturge,
Jonathan E. Barney,
Brian L. Beaudoin,
Ariana M. Bussio,
Ashley E. Hammell,
Samuel L. Henderson,
James E. Krutzler,
Joseph P. Lichthardt,
Alexander H. Mueller,
Karl Smith,
Bryce C. Tappan,
Timothy W. Koeth
Abstract:
Dielectric breakdown is an example of a natural phenomenon that occurs on very short time scales, making it incredibly difficult to capture optical images of the process. Event initiation jitter is one of the primary challenges, as even a microsecond of jitter time can cause the imaging attempt to fail. Initial attempts to capture images of dielectric breakdown with a gigahertz frame rate camera a…
▽ More
Dielectric breakdown is an example of a natural phenomenon that occurs on very short time scales, making it incredibly difficult to capture optical images of the process. Event initiation jitter is one of the primary challenges, as even a microsecond of jitter time can cause the imaging attempt to fail. Initial attempts to capture images of dielectric breakdown with a gigahertz frame rate camera and an exploding bridge wire initiation were stymied by high initiation jitter. Subsequently, a novel optical delay line apparatus was developed in order to effectively circumvent the jitter and reliably image dielectric breakdown. The design and performance of the optical delay line apparatus are presented. The optical delay line increased the image capture success rate from 25% to 94% while also permitting enhanced temporal resolution and has applications for use in imaging other high-jitter, extremely fast phenomena.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Optimization of Flat to Round Transformers with Self-fields using Adjoint Techniques
Authors:
L. Dovlatyan,
B. L. Beaudoin,
S. Bernal,
I. Haber,
D. Sutter,
T. M. Antonsen Jr
Abstract:
A continuous system of moment equations is introduced that models the transverse dynamics of a beam of charged particles as it passes through an arbitrary lattice of quadrupoles and solenoids in the presence of self-fields. Then, figures of merit are introduced specifying system characteristics to be optimized. The resulting model is used to optimize the parameters of the lattice elements of a fla…
▽ More
A continuous system of moment equations is introduced that models the transverse dynamics of a beam of charged particles as it passes through an arbitrary lattice of quadrupoles and solenoids in the presence of self-fields. Then, figures of merit are introduced specifying system characteristics to be optimized. The resulting model is used to optimize the parameters of the lattice elements of a flat to round transformer with self-fields, as could be applied in electron cooling. Results are shown for a case of no self-fields and two cases with self-fields. The optimization is based on a gradient descent algorithm in which the gradient is calculated using adjoint methods that prove to be very computationally efficient. Two figures of merit are studied and compared: one emphasizing radial force balance in the solenoid, the other emphasizing minimization of transverse beam energy in the solenoid.
△ Less
Submitted 4 March, 2022; v1 submitted 13 February, 2021;
originally announced February 2021.
-
Microfabricated Neuroaccelerometer: Integrating Sensing and Reservoir Computing in MEMS
Authors:
Bruno Barazani,
Guillaume Dion,
Jean-François Morissette,
Louis Beaudoin,
Julien Sylvestre
Abstract:
This study presents the design, fabrication, and test of a micro accelerometer with intrinsic processing capabilities, that integrates the functions of sensing and computing in the same MEMS. The device consists of an inertial mass electrostatically coupled to an oscillating beam through a gap of 8 μm. The motion of the inertial mass modulates an AC electrostatic field that drives the beam in its…
▽ More
This study presents the design, fabrication, and test of a micro accelerometer with intrinsic processing capabilities, that integrates the functions of sensing and computing in the same MEMS. The device consists of an inertial mass electrostatically coupled to an oscillating beam through a gap of 8 μm. The motion of the inertial mass modulates an AC electrostatic field that drives the beam in its non-linear regime. This non-linearity is used to implement machine learning in the mechanical domain, using reservoir computing with delayed feedback to process the acceleration information provided by the inertial mass. The device is microfabricated on a silicon-on-insulator substrate using conventional MEMS processes. Dynamic characterization showed good accelerometer functionalities, with an inertial mass sensitivity on the order of 100 mV/g from 250 to 1300 Hz and a natural frequency of 1.7 kHz. In order to test the device computing capabilities, two different machine learning benchmarks were implemented, with the inputs fed to the device as accelerations. The neuromorphic MEMS accelerometer was able to accurately emulate non-linear autoregressive moving average models and compute the parity of random bit streams. These results were obtained in a test system with a non-trivial transfer function, showing a robustness that is well-suited to anticipated applications.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Multi-Stream Instability of a Single Long Electron Bunch in a Storage Ring
Authors:
B. L. Beaudoin,
R. A. Kishek,
I. Haber,
T. W. Koeth,
T. M. Antonsen Jr
Abstract:
A multi-stream instability is observed experimentally in a longitudinally expanding electron beam in a storage ring. The instability is observed when the beam expands such that its length is several times the circumference of the ring, and portions of the beam overlap. While portions of the beam overlap in physical space, due to the nature of the expansion process, the portions form multiple strea…
▽ More
A multi-stream instability is observed experimentally in a longitudinally expanding electron beam in a storage ring. The instability is observed when the beam expands such that its length is several times the circumference of the ring, and portions of the beam overlap. While portions of the beam overlap in physical space, due to the nature of the expansion process, the portions form multiple streams and remain separate in velocity space. The streams become unstable as their number increases and their separation in velocity decreases. An analytical theory predicts the onset of the instability, consistent with simulations and measurements, over a wide range of peak line-charge densities and bunch lengths. This work extends previous calculations to include the dynamic non-linear elongation of the bunch, with a given initial length, and defines an onset criterion for the filament velocity separation.
△ Less
Submitted 28 January, 2019; v1 submitted 17 January, 2019;
originally announced January 2019.
-
Matching Estimators for Causal Effects of Multiple Treatments
Authors:
Anthony D. Scotina,
Francesca L. Beaudoin,
Roee Gutman
Abstract:
Matching estimators for average treatment effects are widely used in the binary treatment setting, in which missing potential outcomes are imputed as the average of observed outcomes of all matches for each unit. With more than two treatment groups, however, estimation using matching requires additional techniques. In this paper, we propose a nearest-neighbors matching estimator for use with multi…
▽ More
Matching estimators for average treatment effects are widely used in the binary treatment setting, in which missing potential outcomes are imputed as the average of observed outcomes of all matches for each unit. With more than two treatment groups, however, estimation using matching requires additional techniques. In this paper, we propose a nearest-neighbors matching estimator for use with multiple, nominal treatments, and use simulations to show that this method is precise and has coverage levels that are close to nominal. In addition, we implement the proposed inference methods to examine the effects of different medication regimens on long-term pain for patients experiencing motor vehicle collision.
△ Less
Submitted 25 April, 2019; v1 submitted 1 September, 2018;
originally announced September 2018.
