-
Scalable synthesis and characterization of multilayer $γ$-graphyne, new carbon crystals with a small direct bandgap
Authors:
Victor G. Desyatkin,
William B. Martin,
Ali E. Aliev,
Nathaniel E. Chapman,
Alexandre F. Fonseca,
Douglas S. Galvão,
E. Roy Miller,
Kevin H. Stone,
Zhong Wang,
Dante Zakhidov,
F. Ted Limpoco,
Sarah R. Almahdali,
Shane M. Parker,
Ray H. Baughman,
Valentin O. Rodionov
Abstract:
$γ$-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk $γ$-graphyne has remained a challenge. We here report the synthesis of multilayer $γ…
▽ More
$γ$-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk $γ$-graphyne has remained a challenge. We here report the synthesis of multilayer $γ$-graphyne through crystallization-assisted irreversible cross-coupling polymerization. Comprehensive characterization of this new carbon phase is described, including synchrotron X-ray diffraction, electron diffraction, lateral force microscopy, Raman and infrared spectroscopy, and cyclic voltammetry. Experiments indicate that $γ$-graphyne is a 0.48 eV bandgap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 $^\circ$C but undergoes a transformation at higher temperatures. While conventional 2D polymerizations and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Zeolite-inspired 3d printed structures with enhanced mechanical properties
Authors:
Rushikesh S. Ambekar,
Eliezer F. Oliveira,
Brijesh Kushwaha,
Leonardo D. Machado,
Mohammad Sajadi,
Ray H. Baughman,
Pulickel M. Ajayan,
Ajit K. Roy,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, r…
▽ More
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.
△ Less
Submitted 12 February, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Three-dimensional carbon nanotube networks from beta zeolite templates: Thermal stability and mechanical properties
Authors:
Eliezer F. Oliveira,
Leonardo D. Machado,
Ray H. Baughman,
Douglas S. Galvao
Abstract:
We here investigated the thermal and mechanical behaviors of three-dimensional beta zeolite-templated carbon nanotube networks (BZCN). These networks are topologically generated by inserting carbon nanotubes (CNTs) into zeolite channels and connecting them using X-type junctions. We considered two cases, one with the tubes filling all zeolite channels (HD-BZCN) and the other with just partial fill…
▽ More
We here investigated the thermal and mechanical behaviors of three-dimensional beta zeolite-templated carbon nanotube networks (BZCN). These networks are topologically generated by inserting carbon nanotubes (CNTs) into zeolite channels and connecting them using X-type junctions. We considered two cases, one with the tubes filling all zeolite channels (HD-BZCN) and the other with just partial filling (LD-BZCN). Fully atomistic reactive molecular dynamics (MD) simulations show that the networks exhibit high thermal stability (up to 1000 K). When compressed, the structures can withstand very large strains without fracturing (>50% for HD-BZCN and >70% for LD-BZCN). LD-BZCN can be stretched over 100% without fracturing.
△ Less
Submitted 21 December, 2019;
originally announced December 2019.
-
Torsional refrigeration by twisted, coiled, and supercoiled fibers
Authors:
Run Wang,
Shaoli Fang,
Yicheng Xiao,
Enlai Gao,
Nan Jiang,
Yaowang Li,
Linlin Mou,
Yanan Shen,
Wubin Zhao,
Sitong Li,
Alexandre F. Fonseca,
Douglas S. Galvão,
Mengmeng Chen,
Wenqian He,
Kaiqing Yu,
Hongbing Lu,
Xuemin Wang,
Dong Qian,
Ali E. Aliev,
Na Li,
Carter S. Haines,
Zhongsheng Liu,
Jiuke Mu,
Zhong Wang,
Shougen Yin
, et al. (5 additional authors not shown)
Abstract:
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural r…
▽ More
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural rubber, NiTi, and polyethylene fishing line. By using opposite chiralities of twist and coiling, supercoiled natural rubber fibers and coiled fishing line fibers result that cool when stretched. A demonstrated twist-based device for cooling flowing water provides a high cooling energy and device efficiency. Theory describes the axial and spring index dependencies of twist-enhanced cooling and its origin in a phase transformation for polyethylene fibers.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes
Authors:
Patricia M. Martinez,
Arthur Ishteev,
Josef Velten,
Azin Fahimi,
Izabela Jurewicz,
Alan B. Dalton,
Ray H. Baughman,
Anvar A. Zakhidov
Abstract:
Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs wit…
▽ More
Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs within the MWNT aerogels increase, however, the final achievable transmittance depends on the initial transparency of the MWNT aerogels. At the same time, a strong decrease in sheet resistance is obtained when AgNWs form a percolated network along the MWNT aerogel. Additionally, anisotropic reduction in sheet resistance and polarized transmittance of AgNWs/MWNTs aerogel is achieved with this method. The final AgNWs/MWNTs hybrid TCEs transmittance and sheet resistance can be fine-tuned by spray-coating mechanisms or by the choice of initial MWNT aerogel density. Thus, a wide range of AgNWs/MWNTs hybrid TCEs with optimized optoelectronic properties can be achieved depending of the requirements needed. Finally, the free-standing AgNWs/MWNTs hybrid TCEs can be laminated onto a wide range of substrates without the need of a bonding aid.
△ Less
Submitted 18 January, 2019;
originally announced January 2019.
-
Modeling the Auxetic Transition for Carbon Nanotube Sheets
Authors:
Vitor R. Coluci,
Lee J. Hall,
Mikhail E. Kozlov,
Mei Zhang,
Socrates O. Dantas,
Douglas S. Galvao,
Ray H. Baughman
Abstract:
A simple model is developed to predict the complex mechanical properties of carbon nanotube sheets (buckypaper) [Hall \textit{et al.}, \textit{Science} \textbf{320} 504 (2008)]. Fabricated using a similar method to that deployed for making writing paper, these buckypapers can have in-plane Poisson's ratios changed from positive to negative, becoming auxetic, as multiwalled carbon nanotubes are i…
▽ More
A simple model is developed to predict the complex mechanical properties of carbon nanotube sheets (buckypaper) [Hall \textit{et al.}, \textit{Science} \textbf{320} 504 (2008)]. Fabricated using a similar method to that deployed for making writing paper, these buckypapers can have in-plane Poisson's ratios changed from positive to negative, becoming auxetic, as multiwalled carbon nanotubes are increasingly mixed with single-walled carbon nanotubes. Essential structural features of the buckypapers are incorporated into the model: isotropic in-plane mechanical properties, nanotubes preferentially oriented in the sheet plane, and freedom to undergo stress-induced elongation by both angle and length changes. The expressions derived for the Poisson's ratios enabled quantitative prediction of both observed properties and remarkable new properties obtainable by structural modification.
△ Less
Submitted 16 March, 2009;
originally announced March 2009.
-
Electroabsorption spectroscopy of single walled nanotubes
Authors:
J. W. Kennedy,
Z. V. Vardeny,
S. Collins,
R. H. Baughman,
H. Zhao,
S. Mazumdar
Abstract:
We have measured the electric field modulated absorption of a sample of single-walled nanotubes (SWNT) suspended in a solid polyvinyl alcohol matrix. The electroabsorption (EA) spectrum roughly follows the first derivative of the absorption with respect to photon energy, scales quadratically with the electric field strength, and shows a pronounced anisotropy of light polarization with respect to…
▽ More
We have measured the electric field modulated absorption of a sample of single-walled nanotubes (SWNT) suspended in a solid polyvinyl alcohol matrix. The electroabsorption (EA) spectrum roughly follows the first derivative of the absorption with respect to photon energy, scales quadratically with the electric field strength, and shows a pronounced anisotropy of light polarization with respect to the applied electric field direction. These findings indicate a quadratic Stark effect caused by a change in the polarizability of the excited states, which is common to quasi-one dimensional (1D) excitons in organic semiconductors. The EA spectrum is well described by calculations involving electron-electron interaction in the model Hamiltonian of both zigzag and chiral nanotubes. We have calculated the EA spectra for both zigzag and chiral nanotubes within a model Hamiltonian that includes electron-electron interactions. The calculations reproduce the observed quadratic Stark shift of the lowest optical exciton, as well as the more complicated behavior of the EA spectrum in the energy region that corresponds to the next higher exciton. Our findings show that the low-lying absorption bands in semiconducting SWNT are excitonic in origin, in agreement with transient optical measurements that identify the primary photoexcitations in SWNT as quasi-1D excitons with a substantial binding energy.
△ Less
Submitted 3 May, 2005;
originally announced May 2005.
-
New Families of Carbon Nanotubes
Authors:
V R. Coluci,
S F Braga,
S B Legoas,
D S Galvao,
R H Baughman
Abstract:
Fundamentally new families of carbon single walled nanotubes are proposed. These nanotubes, called graphynes, result from the elongation of covalent interconnections of graphite-based nanotubes by the introduction of yne groups. Similarly to ordinary nanotubes, arm-chair, zig-zag, and chiral graphyne nanotubes are possible. Electronic properties, predicted using tight-binding and ab initio densi…
▽ More
Fundamentally new families of carbon single walled nanotubes are proposed. These nanotubes, called graphynes, result from the elongation of covalent interconnections of graphite-based nanotubes by the introduction of yne groups. Similarly to ordinary nanotubes, arm-chair, zig-zag, and chiral graphyne nanotubes are possible. Electronic properties, predicted using tight-binding and ab initio density functional methods, show a rich variety of metallic and semiconducting behaviors.
△ Less
Submitted 2 July, 2002;
originally announced July 2002.
-
Evidence for Braggoriton Excitations in Opal Photonic Crystals Infiltrated with Highly Polarizable Dyes
Authors:
N. Eradat,
A. Y. Sivachenko,
M. E. Raikh,
Z. V. Vardeny,
A. A. Zakhidov,
R. H. Baughman
Abstract:
We studied angle-dependent reflectivity spectra of opal photonic crystals infiltrated with cyanine dyes, which are highly polarizable media with very large Rabi frequency. We show that when resonance conditions between the exciton-polariton of the infiltrated dye and Bragg frequencies exist, then the Bragg stop band decomposes into two reflectivity bands with a semi-transparent spectral range in…
▽ More
We studied angle-dependent reflectivity spectra of opal photonic crystals infiltrated with cyanine dyes, which are highly polarizable media with very large Rabi frequency. We show that when resonance conditions between the exciton-polariton of the infiltrated dye and Bragg frequencies exist, then the Bragg stop band decomposes into two reflectivity bands with a semi-transparent spectral range in between that is due to light propagation inside the gap caused by the existence of braggoriton excitations. These novel excitations result from the interplay interaction between the Bragg gap with spatial modulation origin and the polariton gap due to the excitons, and may lead to optical communication traffic inside the gap of photonic crystals via channel waveguiding.
△ Less
Submitted 9 May, 2001;
originally announced May 2001.
-
Anomalous Coherent Backscattering of Light from Opal Photonic Crystals
Authors:
J. Huang,
N. Eradat,
M. E. Raikh,
Z. V. Vardeny,
A. A. Zakhidov,
R. H. Baughman
Abstract:
We studied coherent backscattering (CBS) of light from opal photonic crystals in air at different incident inclination angles, wavelengths and along various [hkl] directions inside the opals. Similar to previously obtained CBS cones from various random media, we found that when Bragg condition with the incident light beam is not met then the CBS cones from opals show a triangular line shape in e…
▽ More
We studied coherent backscattering (CBS) of light from opal photonic crystals in air at different incident inclination angles, wavelengths and along various [hkl] directions inside the opals. Similar to previously obtained CBS cones from various random media, we found that when Bragg condition with the incident light beam is not met then the CBS cones from opals show a triangular line shape in excellent agreement with light diffusion theory. At Bragg condition, however, we observed a dramatic broadening of the opal CBS cones that depends on the incident angle and [hkl] direction. This broadening is explained as due to the light intensity decay in course of propagation along the Bragg direction {\em before the first} and {\em after the last} scattering events. We modified the CBS theory to incorporate the attenuation that results from the photonic band structure of the medium. Using the modified theory we extract from our CBS data the light mean free path and Bragg attenuation length at different [hkl]. Our study shows that CBS measurements are a unique experimental technique to explore photonic crystals with disorder, when other spectroscopical methods become ambiguous due to disorder-induced broadening.
△ Less
Submitted 9 June, 2000;
originally announced June 2000.
