-
Thermally Stable Peltier Controlled Vacuum Chamber for Electrical Transport Measurements
Authors:
S. F. Poole,
O. J. Amin,
A. Solomon,
L. X. Barton,
R. P. Campion K. W. Edmonds,
P. Wadley
Abstract:
The design, manufacture and characterisation of an inexpensive, temperature controlled vacuum chamber with millikelvin stability for electrical transport measurements at and near room temperature is reported. A commercially available Peltier device and high-precision temperature controller are used to actively heat and cool the sample space. The system was designed to minimise thermal fluctuations…
▽ More
The design, manufacture and characterisation of an inexpensive, temperature controlled vacuum chamber with millikelvin stability for electrical transport measurements at and near room temperature is reported. A commercially available Peltier device and high-precision temperature controller are used to actively heat and cool the sample space. The system was designed to minimise thermal fluctuations in spintronic and semiconductor transport measurements but the general principle is relevant to a wide range of electrical measurement applications. The main issues overcome are the mounting of a sample with a path of high thermal conductivity through to the Peltier device and the heat-sinking of said Peltier device inside of a vacuum. A copper slug is used as the mount for a sample and a large copper block is used as a thermal feedthrough before a passive heatsink is used to cool this block. The Peltier device provides 20 W of heating and cooling power achieving a maximum range of 30 K below and 40 K above the ambient temperature. The temperature stability is within 5 mK at all set points with even better performance above ambient temperature. A vacuum pressure of 1e-8 hPa is achievable. As a demonstration, we present experimental results from current-induced electrical switching of a CuMnAs thin film. Transport measurements with and without the Peltier control emphasise the importance of a constant temperature in these applications. The thermal lag between the sample space measurement and the sample itself is observed through magnetoresistance values measured during a temperature sweep.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Probing the Manipulation of Antiferromagnetic Order in CuMnAs Films Using Neutron Diffraction
Authors:
Stuart F. Poole,
Luke X. Barton,
Mu Wang,
Pascal Manuel,
Dmitri Khalyavin,
Sean Langridge,
Kevin W. Edmonds,
Richard P. Campion,
Vit Novák,
Peter Wadley
Abstract:
We describe measurements of the uniaxial magnetic anisotropy and spin-flop rotation of the Néel vector in antiferromagnetic CuMnAs thin films using neutron diffraction. The suppression of the magnetic (100) peak under magnetic fields is observed for films as thin as 20 nm indicating that they undergo a spin-flop transition. Good agreement is found between neutron diffraction and electron transport…
▽ More
We describe measurements of the uniaxial magnetic anisotropy and spin-flop rotation of the Néel vector in antiferromagnetic CuMnAs thin films using neutron diffraction. The suppression of the magnetic (100) peak under magnetic fields is observed for films as thin as 20 nm indicating that they undergo a spin-flop transition. Good agreement is found between neutron diffraction and electron transport measurements of the spin-flop rotation in the same layer, with a similar shape and hysteresis of the obtained curves, while the neutron measurements provide a quantitative determination of the spin flop extent throughout the antiferromagnet layer.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Antiferromagnetic half-skyrmions electrically generated and controlled at room temperature
Authors:
O. J. Amin,
S. F. Poole,
S. Reimers,
L. X. Barton,
F. Maccherozzi,
S. S. Dhesi,
V. Novák,
F. Křížek,
J. S. Chauhan,
R. P. Campion,
A. W. Rushforth,
T. Jungwirth,
O. A. Tretiakov,
K. W. Edmonds,
P. Wadley
Abstract:
Topologically protected magnetic textures, such as skyrmions, half-skyrmions (merons) and their antiparticles, constitute tiny whirls in the magnetic order. They are promising candidates for information carriers in next-generation memory devices, as they can be efficiently propelled at very high velocities using current-induced spin torques. Antiferromagnets have been shown to host versions of the…
▽ More
Topologically protected magnetic textures, such as skyrmions, half-skyrmions (merons) and their antiparticles, constitute tiny whirls in the magnetic order. They are promising candidates for information carriers in next-generation memory devices, as they can be efficiently propelled at very high velocities using current-induced spin torques. Antiferromagnets have been shown to host versions of these textures, which have gained significant attention because of their potential for terahertz dynamics, deflection free motion, and improved size scaling due to the absence of stray field. Here we show that topological spin textures, merons and antimerons, can be generated at room temperature and reversibly moved using electrical pulses in thin film CuMnAs, a semimetallic antiferromagnet that is a testbed system for spintronic applications. The electrical generation and manipulation of antiferromagnetic merons is a crucial step towards realizing the full potential of antiferromagnetic thin films as active components in high density, high speed magnetic memory devices.
△ Less
Submitted 1 July, 2022;
originally announced July 2022.
-
Defect-driven antiferromagnetic domain walls in CuMnAs films
Authors:
Sonka Reimers,
Dominik Kriegner,
Olena Gomonay,
Dina Carbone,
Filip Krizek,
Vit Novak,
Richard P. Campion,
Francesco Maccherozzi,
Alexander Bjorling,
Oliver J. Amin,
Luke X. Barton,
Stuart F. Poole,
Khalid A. Omari,
Jan Michalicka,
Ondrej Man,
Jairo Sinova,
Tomas Jungwirth,
Peter Wadley,
Sarnjeet S. Dhesi,
Kevin W. Edmonds
Abstract:
Efficient manipulation of antiferromagnetic (AF) domains and domain walls has opened up new avenues of research towards ultrafast, high-density spintronic devices. AF domain structures are known to be sensitive to magnetoelastic effects, but the microscopic interplay of crystalline defects, strain and magnetic ordering remains largely unknown. Here, we reveal, using photoemission electron microsco…
▽ More
Efficient manipulation of antiferromagnetic (AF) domains and domain walls has opened up new avenues of research towards ultrafast, high-density spintronic devices. AF domain structures are known to be sensitive to magnetoelastic effects, but the microscopic interplay of crystalline defects, strain and magnetic ordering remains largely unknown. Here, we reveal, using photoemission electron microscopy combined with scanning X-ray diffraction imaging and micromagnetic simulations, that the AF domain structure in CuMnAs thin films is dominated by nanoscale structural twin defects. We demonstrate that microtwin defects, which develop across the entire thickness of the film and terminate on the surface as characteristic lines, determine the location and orientation of 180 degree and 90 degree domain walls. The results emphasize the crucial role of nanoscale crystalline defects in determining the AF domains and domain walls, and provide a route to optimizing device performance.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Low-Energy Switching of Antiferromagnetic CuMnAs/ GaP Using sub-10 Nanosecond Current Pulses
Authors:
K. A. Omari,
L. X. Barton,
O. Amin,
R. P. Campion,
A. W. Rushforth,
P. Wadley,
K. W. Edmonds
Abstract:
The recently discovered electrical-induced switching of antiferromagnetic (AF) materials that have spatial inversion asymmetry has enriched the field of spintronics immensely and opened the door for the concept of antiferromagnetic MRAM. CuMnAs is one promising AF material that exhibits such electrical switching ability, and has been studied to switch using electrical pulses of length millisecond…
▽ More
The recently discovered electrical-induced switching of antiferromagnetic (AF) materials that have spatial inversion asymmetry has enriched the field of spintronics immensely and opened the door for the concept of antiferromagnetic MRAM. CuMnAs is one promising AF material that exhibits such electrical switching ability, and has been studied to switch using electrical pulses of length millisecond down to picosecond, but with little focus on nanosecond regime. We demonstrate here switching of CuMnAs/GaP using nanosecond pulses. Our results showed that in the nanosecond regime low-energy switching, high readout signal with highly reproducible behaviour down to a single pulse can be achieved. Moreover, a comparison of the two switching methods of orthogonal switching and polarity switching was done on same device showing two different behaviours that can be exploited selectively for different future memory/processing applications.
△ Less
Submitted 9 June, 2021;
originally announced June 2021.
