-
Time-evolving coronal modelling of solar maximum around the May 2024 storm by COCONUT
Authors:
Haopeng Wang,
Stefaan Poedts,
Andrea Lani,
Luis Linan,
Tinatin Baratashvili,
Fan Zhang,
Daria Sorokina,
Hyun-jin Jeong,
Yucong Li,
Najafi-Ziyazi Mahdi,
Brigitte Schmieder
Abstract:
Coronal simulations of the solar maximum struggle with poor numerical stability and low computational efficiency since the magnetic field is more complex and stronger and coronal structures evolve more rapidly. This paper aims to enhance the numerical stability of the time-evolving COCONUT coronal model to mitigate these issues, to evaluate differences between the time-evolving and quasi-steady-st…
▽ More
Coronal simulations of the solar maximum struggle with poor numerical stability and low computational efficiency since the magnetic field is more complex and stronger and coronal structures evolve more rapidly. This paper aims to enhance the numerical stability of the time-evolving COCONUT coronal model to mitigate these issues, to evaluate differences between the time-evolving and quasi-steady-state coronal simulation results, and to assess the impact of spatial resolution on global MHD coronal modelling of solar maximum.After enhancing the positivity-preserving property of the time-evolving COCONUT, we employ it to simulate the evolution of coronal structures from the solar surface to 0.1 AU over two CRs around the May 2024 solar storm event. These simulations are performed on unstructured meshes containing 6.06, 1.52, and 0.38 M cells to assess the impact of grid resolution. We also conduct a quasi-steady-state coronal simulation, treating the solar surface as a rigidly rotating spherical shell, to demonstrate the impact of magnetic flux emergence and cancellation in global coronal simulations. Comparison with observations further validates the reliability of this model.This paper demonstrates that incorporating magnetic field evolution in inner-boundary conditions can significantly improve the fidelity of global MHD coronal simulations around solar maximum. The simulated magnetic field strength using a refined mesh with 6.06 M cells can be more than 40% stronger than that in the coarser mesh with 0.38 M cells. A time step of 5 minutes and the mesh containing 1.5 M cells can effectively capture the evolution of large-scale coronal structures and small-sized dipoles. Thus, this model shows promise for accurately conducting real-time global coronal simulations of solar maximum, making it suitable for practical applications.
△ Less
Submitted 17 May, 2025;
originally announced May 2025.
-
SIP-IFVM: A time-evolving coronal model with an extended magnetic field decomposition strategy
Authors:
Haopeng Wang,
Liping Yang,
Stefaan Poedts,
Andrea Lani,
Yuhao Zhou,
Yuhang Gao,
Luis Linan,
Jiakun Lv,
Tinatin Baratashvili,
Jinhan Guo,
Rong Lin,
Zhan Su,
Caixia Li,
Man Zhang,
Wenwen Wei,
Yun Yang,
Yucong Li,
Xinyi Ma,
Edin Husidic,
Hyun-jin Jeong,
Najafi-Ziyazi Mahdi,
Juan Wang,
Brigitte Schmieder
Abstract:
Time-evolving magnetohydrodynamic (MHD) coronal modeling, driven by a series of time-dependent photospheric magnetograms, represents a new generation of coronal simulations. This approach offers greater realism compared to traditional coronal models constrained by a static magnetogram. However, its practical application is seriously limited by low computational efficiency and poor numerical stabil…
▽ More
Time-evolving magnetohydrodynamic (MHD) coronal modeling, driven by a series of time-dependent photospheric magnetograms, represents a new generation of coronal simulations. This approach offers greater realism compared to traditional coronal models constrained by a static magnetogram. However, its practical application is seriously limited by low computational efficiency and poor numerical stability. Therefore, we propose an extended magnetic field decomposition strategy and implement it in the implicit MHD model to develop a coronal model that is both efficient and numerically stable enough for simulating the long-term evolutions of the global corona. The traditional decomposition strategies split the magnetic field into a time-invariant potential field and a time-dependent component $\mathbf{B}_1$. It works well for quasi-steady-state coronal simulations where $\left|\mathbf{B}_1\right|$ is typically small. However, as the inner-boundary magnetic field evolves, $\left|\mathbf{B}_1\right|$ can grow significantly larger and its discretization errors often lead to nonphysical negative thermal pressure, ultimately causing the code to crash. In this paper, we mitigate such undesired situations by introducing a temporally piecewise-constant variable to accommodate part of the non-potential field and remain $\left|\mathbf{B}_1\right|$ consistently small throughout the simulations. We incorporate this novel magnetic field decomposition strategy into our implicit MHD coronal model and apply it to simulate the evolution of coronal structures within 0.1 AU over two solar-maximum Carrington rotations. The results show that this coronal model effectively captures observations and performs more than 80 times faster than real time using only 192 CPU cores, making it well-suited for practical applications in simulating the time-evolving corona.
△ Less
Submitted 10 February, 2025;
originally announced February 2025.
-
Icarus 3.0: Dynamic Heliosphere Modelling
Authors:
Tinatin Baratashvili,
Beatrice Popescu Braileanu,
Fabio Bacchini,
Rony Keppens,
Stefaan Poedts
Abstract:
Space weather predictions are necessary to avoid damage caused by intense geomagnetic storms. Such strong storms are usually caused by a co-rotating interaction region (CIR) passing at Earth or by the arrival of strong coronal mass ejections (CMEs). To mitigate the damage, the effect of propagating CMEs in the solar wind must be estimated accurately at Earth and other locations. Modelling solar wi…
▽ More
Space weather predictions are necessary to avoid damage caused by intense geomagnetic storms. Such strong storms are usually caused by a co-rotating interaction region (CIR) passing at Earth or by the arrival of strong coronal mass ejections (CMEs). To mitigate the damage, the effect of propagating CMEs in the solar wind must be estimated accurately at Earth and other locations. Modelling solar wind accurately is crucial for space weather predictions, as it is the medium for CME propagation. The Icarus heliospheric modelling tool is upgraded to handle dynamic inner heliospheric driving instead of using steady boundary conditions. The ideal magnetohydrodynamic (MHD) solver and the automated grid-adaptivity are adjusted to the latest MPI-AMRVAC version. The inner boundary conditions, prescribed at 0.1 AU for the heliospheric model, are updated time-dependently throughout the simulation. The coronal model is computed repeatedly for selected magnetograms. The particle sampling within MPI-AMRVAC is extended to handle stretched spherical grid information. The solar wind obtained in the simulation is dynamic and shows significant variations throughout the evolution. When comparing the results with the observations, the dynamic solar wind results are more accurate than previous results obtained with purely steady boundary driving. The CMEs propagated through the dynamic solar wind background produce more similar signatures in the time-series data than in the steady solar wind. Dynamic boundary driving in Icarus results in a more self-consistent solar wind evolution in the inner heliosphere. The obtained space weather modelling tool for dynamic solar wind and CME simulations is better suited for space weather forecasting than a steady solar wind model.
△ Less
Submitted 27 January, 2025;
originally announced January 2025.
-
CME propagation in the dynamically coupled space weather tool: COCONUT + EUHFORIA
Authors:
L. Linan,
T. Baratashvili,
A. Lani,
B. Schmieder,
M. Brchnelova,
J. H. Guo,
S. Poedts
Abstract:
This paper aims to present the time-dependent coupling between the coronal model COolfluid COroNal UnsTructured (COCONUT) and the heliospheric forecasting tool EUHFORIA.
We perform six COCONUT simulations where a flux rope is implemented at the solar surface using either the Titov-Démoulin CME model or the Regularized Biot-Savart Laws (RBSL) CME model. At regular intervals, the magnetic field, v…
▽ More
This paper aims to present the time-dependent coupling between the coronal model COolfluid COroNal UnsTructured (COCONUT) and the heliospheric forecasting tool EUHFORIA.
We perform six COCONUT simulations where a flux rope is implemented at the solar surface using either the Titov-Démoulin CME model or the Regularized Biot-Savart Laws (RBSL) CME model. At regular intervals, the magnetic field, velocity, temperature, and density of the 2D surface $R_{b}=21.5~\;R_{\odot}$ are saved in boundary files. This series of coupling files is read in a modified version of EUHFORIA to update progressively its inner boundary. After presenting the early stage of the propagation in COCONUT, we examine how the disturbance of the solar corona created by the propagation of flux ropes is transmitted into EUHFORIA. In particular, we consider the thermodynamic and magnetic profiles at L1 and compare them with those obtained at the interface between the two models.
We demonstrate that the properties of the heliospheric solar wind in EUHFORIA are consistent with those in COCONUT, acting as a direct extension of the coronal domain. Moreover, the disturbances initially created from the propagation of flux ropes in COCONUT continue evolving from the corona in the heliosphere to Earth with a smooth transition at the interface between the two simulations. Looking at the profile of magnetic field components at Earth and different distances from the Sun, we also find that the transient magnetic structures have a self-similar expansion in COCONUT and EUHFORIA. However, the amplitude of the profiles depends on the flux rope model used and its properties, thus emphasizing the important role of the initial properties in solar source regions for accurately predicting the impact of CMEs.
△ Less
Submitted 28 November, 2024;
originally announced November 2024.
-
Efficient magnetohydrodynamic modelling of the time-evolving corona by COCONUT
Authors:
Haopeng Wang,
Stefaan Poedts,
Andrea Lani,
Michaela Brchnelová,
Tinatin Baratashvili,
Luis Linan,
Fan Zhang,
Dawei Hou,
Yuhao Zhou
Abstract:
Compared to quasi-steady-state corona models that are constrained by a time-invariant magnetogram over a CR period, time-evolving corona models driven by time-varying photospheric magnetograms are more realistic and can maintain more useful information to accurately describe solar wind evolution and forecast CME propagation. This paper demonstrate that time-evolving corona simulations can be perfo…
▽ More
Compared to quasi-steady-state corona models that are constrained by a time-invariant magnetogram over a CR period, time-evolving corona models driven by time-varying photospheric magnetograms are more realistic and can maintain more useful information to accurately describe solar wind evolution and forecast CME propagation. This paper demonstrate that time-evolving corona simulations can be performed efficiently and accurately using an implicit method with relatively large time steps. We also evaluate differences between coronal structures captured by time-evolving and quasi-steady simulations over a CR period during solar minimum. We used a series of hourly updated photospheric magnetograms to drive the evolution of coronal structures from the solar surface to $25\; R_s$ during two CRs around the 2019 eclipse in an inertial coordinate system. We compare the time-evolving and quasi-steady simulations to demonstrate that the differences in these two types of coronal modelling can be obvious even for a solar minimum. The relative differences in radial velocity and density can be over $15 \%$ and $25 \%$ at 20$\;R_s$ during one CR period. We also evaluated the impact of time steps on the simulation results. Using a time step of approximately 10 minutes balances efficiency and necessary numerical stability and accuracy for time-evolving corona simulations around solar minima, with coronal evolution during a full CR simulated within only 9 hours (using 1080 CPU cores for 1.5M grid cells). The simulation results demonstrate that time-evolving MHD coronal simulations can be performed efficiently and accurately using an implicit method, offering a more realistic alternative to quasi-steady-state simulations. The fully implicit time-evolving corona model thus promises to simulate the time-evolving corona accurately in practical space weather forecasting.
△ Less
Submitted 8 February, 2025; v1 submitted 3 September, 2024;
originally announced September 2024.
-
SIP-IFVM: Efficient time-accurate magnetohydrodynamic model of the corona and coronal mass ejections
Authors:
H. P. Wang,
J. H. Guo,
L. P. Yang,
S. Poedts,
F. Zhang,
A. Lani,
T. Baratashvili,
L. Linan,
R. Lin,
Y. Guo
Abstract:
In this paper, we present an efficient and time-accurate three-dimensional (3D) single-fluid MHD solar coronal model and employ it to simulate CME evolution and propagation. Based on a quasi-steady-state implicit MHD coronal model, we developed an efficient time-accurate coronal model that can be used to speed up the CME simulation by selecting a large time-step size. We have called it the Solar I…
▽ More
In this paper, we present an efficient and time-accurate three-dimensional (3D) single-fluid MHD solar coronal model and employ it to simulate CME evolution and propagation. Based on a quasi-steady-state implicit MHD coronal model, we developed an efficient time-accurate coronal model that can be used to speed up the CME simulation by selecting a large time-step size. We have called it the Solar Interplanetary Phenomena-Implicit Finite Volume Method (SIP-IFVM) coronal model. A pseudo-time marching method was implemented to improve temporal accuracy. A regularised Biot-Savart Laws (RBSL) flux rope, whose axis can be designed into an arbitrary shape, was inserted into the background corona to trigger the CME event. We performed a CME simulation on the background corona of Carrington rotation (CR) 2219 and evaluated the impact of time-step sizes on simulation results. Our study demonstrates that this model is able to simulate the CME evolution and propagation process from the solar surface to $20\; R_s$ in less than 0.5 hours (192 CPU cores, $\sim$ 1 M cells). Compared to the explicit counterpart, this implicit coronal model is not only faster, but it also has improved numerical stability. We also conducted an ad hoc simulation with initial magnetic fields artificially increased. It shows that this model can effectively deal with time-dependent low-$β$ problems ($β<10^{-4}$). Additionally, an Orszag-Tang MHD vortex flow simulation demonstrates that the pseudo-time-marching method used in this coronal model can simulate small-scale unsteady-state flows. The simulation results show that this MHD coronal model is very efficient and numerically stable. It is a promising approach to simulating time-varying events in the solar corona with low plasma $β$ in a timely and accurate manner.
△ Less
Submitted 8 January, 2025; v1 submitted 3 September, 2024;
originally announced September 2024.
-
The operationally ready full three-dimensional magnetohydrodynamic (3D MHD) model from the Sun to Earth: COCONUT+Icarus
Authors:
Tinatin Baratashvili,
Michaela Brchnelova,
Luis Linan,
Andrea Lani,
Stefaan Poedts
Abstract:
Solar wind modelling has become a crucial area of study due to the increased dependence of modern society on technology, navigation, and power systems. Accurate space weather forecasts can predict upcoming threats to Earth's geospace. In this study, we examine a novel full magnetohydrodynamic (MHD) chain from the Sun to Earth. The goal of this study is to demonstrate the capabilities of the full M…
▽ More
Solar wind modelling has become a crucial area of study due to the increased dependence of modern society on technology, navigation, and power systems. Accurate space weather forecasts can predict upcoming threats to Earth's geospace. In this study, we examine a novel full magnetohydrodynamic (MHD) chain from the Sun to Earth. The goal of this study is to demonstrate the capabilities of the full MHD modelling chain from the Sun to Earth by finalising the implementation of the full MHD coronal model into the COolfluid COroNa UnsTructured (COCONUT) model and coupling it to the MHD heliospheric model Icarus. The resulting coronal model has significant advantages compared to the pre-existing polytropic alternative, as it models a more realistic bi-modal wind, which is crucial for heliospheric studies.
In this study, only thermal conduction, radiative losses, and approximated coronal heating function were considered in the energy equation. A realistic specific heat ratio was applied. The output of the coronal model was used to onset the 3D MHD heliospheric model Icarus. A minimum solar activity case was chosen as the first test case for the full MHD model. The numerically simulated data in the corona and the heliosphere were compared to observational products. We present a first attempt to obtain the full MHD chain from the Sun to Earth with COCONUT and Icarus. The coronal model has been upgraded to a full MHD model for a realistic bi-modal solar wind configuration. The approximated heating functions have modelled the wind reasonably well, but simple approximations are not enough to obtain a realistic density-speed balance or realistic features in the low corona and farther, near the outer boundary. The full MHD model was computed in 1.06 h on 180 cores of the Genius cluster of the Vlaams Supercomputing Center, which is only 1.8 times longer than the polytropic simulation.
△ Less
Submitted 25 July, 2024;
originally announced July 2024.
-
How coronal mass ejections are influenced by the morphology and toroidal flux of their source magnetic flux ropes?
Authors:
J. H. Guo,
L. Linan,
S. Poedts,
Y. Guo,
B. Schmieder,
A. Lani,
Y. W. Ni,
M. Brchnelova,
B. Perri,
T. Baratashvili,
S. T. Li,
P. F. Chen
Abstract:
Coronal mass ejections (CMEs) stand as intense eruptions of magnetized plasma from the Sun, playing a pivotal role in driving significant changes of the heliospheric environment. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space weather forecasting. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space…
▽ More
Coronal mass ejections (CMEs) stand as intense eruptions of magnetized plasma from the Sun, playing a pivotal role in driving significant changes of the heliospheric environment. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space weather forecasting. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space weather forecasting. The primary objective of this paper is to establish a connection between CMEs and their progenitors in solar source regions, enabling us to infer the magnetic structures of CMEs before their full development. To this end, we create a dataset comprising a magnetic flux rope series with varying projection shapes, sizes and toroidal fluxes, using the Regularized Biot-Savart Laws (RBSL). Thereafter, we simulate the propagation of these flux ropes from the solar surface to a distance of 25$R_{\odot}$ with our global coronal MHD model which is named COCONUT. Our parametric survey reveals significant impacts of source flux ropes on the consequent CMEs. We find that the projection shape can influence the magnetic structures of CMEs at 20$R_{\odot}$, albeit with minimal impacts on the propagation speed. However, these impacts diminish as source flux ropes become fat. In terms of toroidal flux, our simulation results demonstrate a pronounced correlation with the propagation speed of CMEs, as well as the successfulness in erupting. This work builds the bridge between the CMEs in the outer corona and their progenitors in solar source regions. Our parametric survey suggests that the projection shape, cross-section radius and toroidal flux of source flux ropes are crucial parameters in predicting magnetic structures and propagation speed of CMEs, providing valuable insights for space weather prediction.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Multi spacecraft study with the Icarus model: Modelling the propagation of CMEs to Mercury and Earth
Authors:
Tinatin Baratashvili,
Benjamin Grison,
Brigitte Schmieder,
Pascal Demoulin,
Stefaan Poedts
Abstract:
Coronal Mass Ejections (CMEs) are the main drivers of the disturbances in interplanetary space. Understanding the CME interior magnetic structure is crucial for advancing space weather studies. Assessing the capabilities of a numerical heliospheric model is crucial, as understanding the nature and extent of its limitations can be used for improving the model and the space weather predictions based…
▽ More
Coronal Mass Ejections (CMEs) are the main drivers of the disturbances in interplanetary space. Understanding the CME interior magnetic structure is crucial for advancing space weather studies. Assessing the capabilities of a numerical heliospheric model is crucial, as understanding the nature and extent of its limitations can be used for improving the model and the space weather predictions based on it.
The present paper aims to test the capabilities of the recently developed heliospheric model Icarus and the linear force-free spheromak model that has been implemented in it.
To validate the Icarus space weather modeling tool, two CME events were selected that were observed by two spacecraft located near Mercury and Earth, respectively. This enables testing the heliospheric model computed with Icarus at two distant locations. The source regions for the CMEs were identified, and the CME parameters were determined and later optimized. Different adaptive mesh refinement levels were applied in the simulations to assess its performance by comparing the simulation results to in-situ measurements.
The first CME event erupted on SOL2013-07-09T15:24. The modeled time series were in good agreement with the observations both at MESSENGER and ACE. The second CME event started on SOL2014-02-16T10:24 and was more complicated, as three CME interactions occurred in this event. It was impossible to recover the observed profiles without modeling the other two CMEs that were observed, one before the main CME and one afterward. For both CME studies, AMR level 3 was sufficient to reconstruct small-scale features near Mercury, while at Earth, AMR level 4 was necessary due to the radially stretched grid that was used.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Energetic particle acceleration and transport with the novel Icarus$+$PARADISE model
Authors:
Edin Husidic,
Nicolas Wijsen,
Tinatin Baratashvili,
Stefaan Poedts,
Rami Vainio
Abstract:
With the rise of satellites and mankind's growing dependence on technology, there is an increasing awareness of space weather phenomena related to high-energy particles. Shock waves driven by coronal mass ejections (CMEs) and corotating interaction regions (CIRs) occasionally act as potent particle accelerators, generating hazardous solar energetic particles (SEPs) that pose risks to satellite ele…
▽ More
With the rise of satellites and mankind's growing dependence on technology, there is an increasing awareness of space weather phenomena related to high-energy particles. Shock waves driven by coronal mass ejections (CMEs) and corotating interaction regions (CIRs) occasionally act as potent particle accelerators, generating hazardous solar energetic particles (SEPs) that pose risks to satellite electronics and astronauts. Numerical simulation tools capable of modelling and predicting large SEP events are thus highly demanded. We introduce the new Icarus$+$PARADISE model as an advancement of the previous EUHFORIA$+$PARADISE model. Icarus, based on the MPI-AMRVAC framework, is a three-dimensional magnetohydrodynamic code that models solar wind configurations from 0.1 au onwards, encompassing transient structures like CMEs or CIRs. Differing from EUHFORIA's uniform-only grid, Icarus incorporates solution adaptive mesh refinement (AMR) and grid stretching. The particle transport code PARADISE propagates energetic particles as test particles through these solar wind configurations by solving the focused transport equation in a stochastic manner. We validate our new model by reproducing EUHFORIA+PARADISE results. This is done by modelling the acceleration and transport of energetic particles in a synthetic solar wind configuration containing an embedded CIR. Subsequently, we illustrate how the simulation results vary with grid resolution by employing different levels of AMR. The resulting intensity profiles illustrate increased particle acceleration with higher levels of AMR in the shock region, better capturing the effects of the shock.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
The effect of AMR and grid stretching on the magnetized CME model in Icarus
Authors:
Tinatin Baratashvili,
Stefaan Poedts
Abstract:
Context. Coronal mass ejections (CMEs) are the main driver of solar wind disturbances near Earth. When directed towards us, the internal magnetic field of the CME can interact with the Earth`s magnetic field and cause geomagnetic storms. In order to better predict and avoid damage coming from such events, the optimized heliospheric model Icarus has been implemented. Aims. The impact of a CME at Ea…
▽ More
Context. Coronal mass ejections (CMEs) are the main driver of solar wind disturbances near Earth. When directed towards us, the internal magnetic field of the CME can interact with the Earth`s magnetic field and cause geomagnetic storms. In order to better predict and avoid damage coming from such events, the optimized heliospheric model Icarus has been implemented. Aims. The impact of a CME at Earth is greatly affected by its internal magnetic field structure. The aim of this work is to enable modelling the evolution of the magnetic field configuration of the CME throughout its propagation in Icarus. The focus of the study is on the global magnetic structure of the CME and its evolution and interaction with the solar wind. Methods. The magnetized CME model that is implemented in Icarus is the Linear Force-Free Spheromak and is imported from EUHFORIA. Advanced techniques, such as grid stretching and AMR are applied. Different AMR levels are applied in order to obtain high resolution locally, where needed. The results of all the simulations are compared in detail and the wall-clock times of the simulations are provided. Results. The results from the performed simulations are analyzed. The arrival time is better approximated by the EUHFORIA simulation, with the CME shock arriving 1.6 and 1.09 hours later than in the AMR level 4 and 5 simulations, respectively. The profile features and variable strengths are best modelled by Icarus simulations with AMR level 4 and 5. Conclusions. The arrival time is closer to the observed time in the EUHFORIA simulation, but the profiles of the different variables show more features and details in the Icarus simulations. Considering the small difference in the modelled results, and the large difference in computational resources, the AMR level 4 simulation is considered to have performed the best.
△ Less
Submitted 6 February, 2024; v1 submitted 4 January, 2024;
originally announced January 2024.
-
Modelling the propagation of coronal mass ejections with COCONUT: implementation of the Regularized Biot-Savart Laws flux rope model
Authors:
Jinhan Guo,
L. Linan,
S. Poedts,
Y. Guo,
A. Lani,
B. Schmieder,
M. Brchnelova,
B. Perri,
T. Baratashvili,
Y. W. Ni,
P. F. Chen
Abstract:
Context: Coronal mass ejections (CMEs) are rapid eruptions of magnetized plasma that occur on the Sun, which are known as the main drivers of adverse space weather. Accurately tracking their evolution in the heliosphere in numerical models is of utmost importance for space weather forecasting. Aims: The main objective of this paper is to implement the Regularized Biot-Savart Laws (RBSL) method in…
▽ More
Context: Coronal mass ejections (CMEs) are rapid eruptions of magnetized plasma that occur on the Sun, which are known as the main drivers of adverse space weather. Accurately tracking their evolution in the heliosphere in numerical models is of utmost importance for space weather forecasting. Aims: The main objective of this paper is to implement the Regularized Biot-Savart Laws (RBSL) method in a new global corona model COCONUT. This approach has the capability to construct the magnetic flux rope with an axis of arbitrary shape. Methods: We present the implementation process of the RBSL flux rope model in COCONUT, which is superposed onto a realistic solar wind reconstructed from the observed magnetogram around the minimum of solar activity. Based on this, we simulate the propagation of an S-shaped flux rope from the solar surface to a distance of 25 solar radii. Results: Our simulation successfully reproduces the birth process of a CME originating from a sigmoid in a self-consistent way. The model effectively captures various physical processes and retrieves the prominent features of the CMEs in observations. In addition, the simulation results indicate that the magnetic topology of the CME flux rope at around 20 solar radii deviates from a coherent structure, and manifests as a mix of open and closed field lines with diverse footpoints. Conclusions: This work demonstrates the potential of the RBSL flux rope model in reproducing CME events that are more consistent with observations. Moreover, our findings strongly suggest that magnetic reconnection during the CME propagation plays a critical role in destroying the coherent characteristic of a CME flux rope.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Exploring the effects of numerical methods and slope limiters in heliospheric modeling
Authors:
Tinatin Baratashvili,
Christine Verbeke,
Rony Keppens,
Stefaan Poedts
Abstract:
Coronal mass ejections (CMEs) are large eruptions close to the solar surface, where plasma is ejected outwards into space at large speeds. When directed towards Earth, they interfere with Earth's magnetic fields and cause strong geo-effective storms. In order to mitigate the potential damage, forecasting tools are implemented. Recently, a novel heliospheric modelling tool, Icarus, has been impleme…
▽ More
Coronal mass ejections (CMEs) are large eruptions close to the solar surface, where plasma is ejected outwards into space at large speeds. When directed towards Earth, they interfere with Earth's magnetic fields and cause strong geo-effective storms. In order to mitigate the potential damage, forecasting tools are implemented. Recently, a novel heliospheric modelling tool, Icarus, has been implemented, which exploits the open-source framework MPI-AMRVAC as its core MHD solver. This new model efficiently performs 3D MHD simulations of the solar wind and the evolution of interplanetary CMEs with the help of advanced techniques, such as adaptive mesh refinement and gradual radial grid stretching. The numerical methods applied in the simulations can have significant effects on the simulation results and on the efficiency of the model. In this study, the effect of different combinations of numerical schemes and slope limiters, for reconstructing edge-based variabes used in fluxes, is considered. We explore frequently exploited combinations from the available numerical schemes in MPI-AMRVAC: TVDLF, HLL and HLLC along with the slope limiters 'woodward', 'minmod', 'vanleer', and 'koren'. For analysis purposes, we selected one particular solar wind configuration and studied the influence on variables at 1 AU in the equatorial plane. The goal is to find the optimal combination to produce accurate results fast and in a robust way so that the model can be reliable for day-to-day use by space weather scientists. As a conclusion, the best result assessed with these two criteria is the combination of the TVDLF scheme with the 'woodward' limiter.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Improving CME evolution and arrival predictions with AMR and grid stretching in Icarus
Authors:
Tinatin Baratashvili,
Christine Verbeke,
Nicolas Wijsen,
Stefaan Poedts
Abstract:
Coronal Mass Ejections (CMEs) are one of the main drivers of disturbances in the interplanetary space. Strong CMEs, when directed towards the Earth, cause geo-magnetic storms upon interacting with the magnetic field of the Earthand can cause significant damage to our planet and affect everyday life. As such, efficient space weather prediction tools are necessary to forecast the arrival and impact…
▽ More
Coronal Mass Ejections (CMEs) are one of the main drivers of disturbances in the interplanetary space. Strong CMEs, when directed towards the Earth, cause geo-magnetic storms upon interacting with the magnetic field of the Earthand can cause significant damage to our planet and affect everyday life. As such, efficient space weather prediction tools are necessary to forecast the arrival and impact of CME eruptions. Recently, a new heliospheric model Icarus was developed based on MPI-AMRVAC, which is a 3D ideal MHD model for the solar wind and CME propagation, and it introduces advanced numerical techniques to make the simulations more efficient. A cone model is used to study the evolution of the CME through the background solar wind and its arrival and impact at Earth. Grid stretching and AMR are combined in the simulations by using multiple refinement criteria. We compare simulation results to the EUFHORIA model. As a result, the simulations were sped up by a factor of 17 for the most optimal configuration in Icarus. For the cone CME model, we found that limiting the AMR to the region around the CME-driven shock yields the best results. The results modelled by the simulations with radial grid stretching and AMR level 4 are similar to the results provided by the original EUHFORIA and Icarus simulations with the 'standard' resolution and equidistant grids. The simulations with 5 AMR levels yielded better results than the simulations with an equidistant grid and standard resolution. Solution AMR is flexible and provides the user the freedom to modify and locally increase the grid resolution according to the purpose of the simulation. The advanced techniques implemented in Icarus can be further used to improve the forecasting procedures, since the reduced simulation time is essential to make physics-based forecasts less computationally expensive.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
COCONUT, a novel fast-converging MHD model for solar corona simulations: II. Assessing the impact of the input magnetic map on space-weather forecasting at minimum of activity
Authors:
Barbara Perri,
Blazej Kuzma,
Michaela Brchnelova,
Tinatin Baratashvili,
Fan Zhang,
Peter Leitner,
Andrea Lani,
Stefaan Poedts
Abstract:
This paper is dedicated to the new implicit unstructured coronal code COCONUT, which aims at providing fast and accurate inputs for space weather forecast as an alternative to empirical models. We use all 20 available magnetic maps of the solar photosphere covering the date of the 2nd of July 2019 which corresponds to a solar eclipse on Earth. We use the same standard pre-processing on all maps, t…
▽ More
This paper is dedicated to the new implicit unstructured coronal code COCONUT, which aims at providing fast and accurate inputs for space weather forecast as an alternative to empirical models. We use all 20 available magnetic maps of the solar photosphere covering the date of the 2nd of July 2019 which corresponds to a solar eclipse on Earth. We use the same standard pre-processing on all maps, then perform coronal MHD simulations with the same numerical and physical parameters. In the end, we quantify the performance for each map using three indicators from remote-sensing observations: white-light total solar eclipse images for the streamers' edges, EUV synoptic maps for coronal holes and white-light coronagraph images for the heliospheric current sheet. We discuss the performance for space weather forecasts and we show that the choice of the input magnetic map has a strong impact. We find performances between 24% to 85% for the streamers' edges, 24% to 88% for the coronal hole boundaries and a mean deviation between 4 to 12 degrees for the heliospheric current sheet position. We find that the HMI runs are globally performing better on all indicators, with the GONG-ADAPT being the second-best choice. HMI runs perform better for the streamers' edges, GONG-ADAPT for polar coronal holes, HMI synchronic for equatorial coronal holes and for the streamer belt. We especially showcase the importance of the filling of the poles. This demonstrates that the solar poles have to be taken into account even for ecliptic plane previsions.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
COCONUT, a novel fast-converging MHD model for solar corona simulations: I. Benchmarking and optimization of polytropic solutions
Authors:
Barbara Perri,
Peter Leitner,
Michaela Brchnelova,
Tinatin Baratashvili,
Blazej Kuzma,
Fan Zhang,
Andrea Lani,
Stefaan Poedts
Abstract:
We present a novel global 3-D coronal MHD model called COCONUT, polytropic in its first stage and based on a time-implicit backward Euler scheme. Our model boosts run-time performance in comparison with contemporary MHD-solvers based on explicit schemes, which is particularly important when later employed in an operational setting for space weather forecasting. It is data-driven in the sense that…
▽ More
We present a novel global 3-D coronal MHD model called COCONUT, polytropic in its first stage and based on a time-implicit backward Euler scheme. Our model boosts run-time performance in comparison with contemporary MHD-solvers based on explicit schemes, which is particularly important when later employed in an operational setting for space weather forecasting. It is data-driven in the sense that we use synoptic maps as inner boundary input for our potential field initialization as well as an inner boundary condition in the further MHD time evolution. The coronal model is developed as part of the EUropean Heliospheric FORecasting Information Asset (EUHFORIA) and will replace the currently employed, more simplistic, empirical Wang-Sheeley-Arge (WSA) model. At 21.5 Rs where the solar wind is already supersonic, it is coupled to EUHFORIA's heliospheric model. We validate and benchmark our coronal simulation results with the explicit-scheme Wind-Predict model and find good agreement for idealized limit cases as well as real magnetograms, while obtaining a computational time reduction of up to a factor 3 for simple idealized cases, and up to 35 for realistic configurations, and we demonstrate that the time gained increases with the spatial resolution of the input synoptic map. We also use observations to constrain the model and show that it recovers relevant features such as the position and shape of the streamers (by comparison with eclipse white-light images), the coronal holes (by comparison with EUV images) and the current sheet (by comparison with WSA model at 0.1 AU).
△ Less
Submitted 23 May, 2022; v1 submitted 6 May, 2022;
originally announced May 2022.
-
A binary with a $δ$~Scuti star and an oscillating red giant: orbit and asteroseismology of KIC9773821
Authors:
Simon J Murphy,
Tanda Li,
Sanjay Sekaran,
Timothy R. Bedding,
Jie Yu,
Andrew Tkachenko,
Isabel Colman,
Daniel Huber,
Daniel Hey,
Tinatin Baratashvili,
Soetkin Janssens
Abstract:
We study the $δ$ Scuti -- red giant binary KIC9773821, the first double-pulsator binary of its kind. It was observed by \textit{Kepler} during its four-year mission. Our aims are to ascertain whether the system is bound, rather than a chance alignment, and to identify the evolutionary state of the red giant via asteroseismology. An extension of these aims is to determine a dynamical mass and an ag…
▽ More
We study the $δ$ Scuti -- red giant binary KIC9773821, the first double-pulsator binary of its kind. It was observed by \textit{Kepler} during its four-year mission. Our aims are to ascertain whether the system is bound, rather than a chance alignment, and to identify the evolutionary state of the red giant via asteroseismology. An extension of these aims is to determine a dynamical mass and an age prior for a $δ$ Sct star, which may permit mode identification via further asteroseismic modelling. We determine spectroscopic parameters and radial velocities (RVs) for the red giant component using HERMES@Mercator spectroscopy. Light arrival-time delays from the $δ$ Sct pulsations are used with the red-giant RVs to determine that the system is bound and to infer its orbital parameters, including the binary mass ratio. We use asteroseismology to model the individual frequencies of the red giant to give a mass of $2.10^{+0.20}_{-0.10}$ M$_{\odot}$ and an age of $1.08^{+0.06}_{-0.24}$ Gyr. We find that it is a helium-burning secondary clump star, confirm that it follows the standard $ν_{\rm max}$ scaling relation, and confirm its observed period spacings match their theoretical counterparts in the modelling code MESA. Our results also constrain the mass and age of the $δ$ Sct star. We leverage these constraints to construct $δ$ Sct models in a reduced parameter space and identify four of its five pulsation modes.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
