-
Purity benchmarking study of error coherence in a single Xmon qubit
Authors:
Auda Zhu,
Jérémy H. Béjanin,
Xicheng Xu,
Matteo Mariantoni
Abstract:
In this study, we employ purity benchmarking (PB) to explore the dynamics of gate noise in a superconducting qubit system. Over 1110 hours of observations on an Xmon qubit, we simultaneously measure the coherence noise budget across two different operational frequencies. We find that incoherent errors, which predominate in overall error rates, exhibit minimal frequency dependence, suggesting they…
▽ More
In this study, we employ purity benchmarking (PB) to explore the dynamics of gate noise in a superconducting qubit system. Over 1110 hours of observations on an Xmon qubit, we simultaneously measure the coherence noise budget across two different operational frequencies. We find that incoherent errors, which predominate in overall error rates, exhibit minimal frequency dependence, suggesting they are primarily due to wide-band, diffusive incoherent error sources. In contrast, coherent errors, although less prevalent, show significant sensitivity to operational frequency variations and telegraphic noise. We speculate that this sensitivity is due to interactions with a single strongly coupled environmental defect -- modeled as a two-level system -- which influences qubit control parameters and causes coherent calibration errors. Our results also demonstrate that PB offers improved sensitivity, capturing additional dynamics that conventional relaxation time measurements cannot detect, thus presenting a more comprehensive method for capturing dynamic interactions within quantum systems. The intricate nature of these coherence dynamics underscores the need for further research.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
The Quantum Socket and DemuXYZ-Based Gates with Superconducting Qubits
Authors:
J. H. Béjanin,
C. T. Earnest,
M. Mariantoni
Abstract:
Building large-scale superconducting quantum computers requires two complimentary elements: scalable wiring techniques and multiplex architectures. In our previous work [Béjanin et al., Phys. Rev. Applied 6, 044010 (2016)], we have introduced and characterized a truly vertical interconnect named the quantum socket. In this paper, we exercise the quantum socket using high-coherence flux-tunable Xmo…
▽ More
Building large-scale superconducting quantum computers requires two complimentary elements: scalable wiring techniques and multiplex architectures. In our previous work [Béjanin et al., Phys. Rev. Applied 6, 044010 (2016)], we have introduced and characterized a truly vertical interconnect named the quantum socket. In this paper, we exercise the quantum socket using high-coherence flux-tunable Xmon transmon qubits. In particular, we test potential qubit heating and one-qubit gate performance. We observe no heating effects and time-stable gate fidelities in excess of 99.9%. We then propose and experimentally characterize a demultiplexed gate technique based on flux pulses and a common continuous drive signal: DemuXYZ. We discuss DemuXYZ's working principle, show its operation, and perform quantum process tomography on a selection of one-qubit gates to confirm proper operation. We obtain fidelities around 93% likely limited by flux-pulse imperfections. We finally discuss future solutions for wiring integration as well as improvements to the DemuXYZ technique.
△ Less
Submitted 31 October, 2022;
originally announced November 2022.
-
Fluctuation Spectroscopy of Two-Level Systems in Superconducting Resonators
Authors:
J. H. Béjanin,
Y. Ayadi,
X. Xu,
C. Zhu,
H. R. Mohebbi,
M. Mariantoni
Abstract:
Superconducting quantum computing is experiencing a tremendous growth. Although major milestones have already been achieved, useful quantum-computing applications are hindered by a variety of decoherence phenomena. Decoherence due to two-level systems (TLSs) hosted by amorphous dielectric materials is ubiquitous in planar superconducting devices. We use high-quality quasilumped element resonators…
▽ More
Superconducting quantum computing is experiencing a tremendous growth. Although major milestones have already been achieved, useful quantum-computing applications are hindered by a variety of decoherence phenomena. Decoherence due to two-level systems (TLSs) hosted by amorphous dielectric materials is ubiquitous in planar superconducting devices. We use high-quality quasilumped element resonators as quantum sensors to investigate TLS-induced loss and noise. We perform two-tone experiments with a probe and pump electric field; the pump is applied at different power levels and detunings. We measure and analyze time series of the quality factor and resonance frequency for very long time periods, up to 1000 h. We additionally carry out simulations based on the TLS interacting model in presence of a pump field. We find that loss and noise are reduced at medium and high power, matching the simulations, but not at low power.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Interacting Defects Generate Stochastic Fluctuations in Superconducting Qubits
Authors:
J. H. Béjanin,
C. T. Earnest,
A. S. Sharafeldin,
M. Mariantoni
Abstract:
Amorphous dielectric materials have been known to host two-level systems (TLSs) for more than four decades. Recent developments on superconducting resonators and qubits enable detailed studies on the physics of TLSs. In particular, measuring the loss of a device over long time periods (a few days) allows us to investigate stochastic fluctuations due to the interaction between TLSs. We measure the…
▽ More
Amorphous dielectric materials have been known to host two-level systems (TLSs) for more than four decades. Recent developments on superconducting resonators and qubits enable detailed studies on the physics of TLSs. In particular, measuring the loss of a device over long time periods (a few days) allows us to investigate stochastic fluctuations due to the interaction between TLSs. We measure the energy relaxation time of a frequency-tunable planar superconducting qubit over time and frequency. The experiments show a variety of stochastic patterns that we are able to explain by means of extensive simulations. The model used in our simulations assumes a qubit interacting with high-frequency TLSs, which, in turn, interact with thermally activated low-frequency TLSs. Our simulations match the experiments and suggest the density of low-frequency TLSs is about three orders of magnitude larger than that of high-frequency ones.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Resonant Coupling Parameter Estimation with Superconducting Qubits
Authors:
J. H. Béjanin,
C. T. Earnest,
Y. R. Sanders,
M. Mariantoni
Abstract:
Today's quantum computers are comprised of tens of qubits interacting with each other and the environment in increasingly complex networks. In order to achieve the best possible performance when operating such systems, it is necessary to have accurate knowledge of all parameters in the quantum computer Hamiltonian. In this article, we demonstrate theoretically and experimentally a method to effici…
▽ More
Today's quantum computers are comprised of tens of qubits interacting with each other and the environment in increasingly complex networks. In order to achieve the best possible performance when operating such systems, it is necessary to have accurate knowledge of all parameters in the quantum computer Hamiltonian. In this article, we demonstrate theoretically and experimentally a method to efficiently learn the parameters of resonant interactions for quantum computers consisting of frequency-tunable superconducting qubits. Such interactions include, for example, those to other qubits, resonators, two-level state defects, or other unwanted modes. Our method is based on a significantly improved swap spectroscopy calibration and consists of an offline data collection algorithm, followed by an online Bayesian learning algorithm. The purpose of the offline algorithm is to detect and roughly estimate resonant interactions from a state of zero knowledge. It produces a square-root reduction in the number of measurements. The online algorithm subsequently refines the estimate of the parameters to comparable accuracy as traditional swap spectroscopy calibration, but in constant time. We perform an experiment implementing our technique with a superconducting qubit. By combining both algorithms, we observe a reduction of the calibration time by one order of magnitude. We believe the method investigated will improve present medium-scale superconducting quantum computers and will also scale up to larger systems. Finally, the two algorithms presented here can be readily adopted by communities working on different physical implementations of quantum computing architectures.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Improving the Time Stability of Superconducting Planar Resonators
Authors:
M. S. Moeed,
C. T. Earnest,
J. H. Béjanin,
A. S. Sharafeldin,
M. Mariantoni
Abstract:
Quantum computers are close to become a practical technology. Solid-state implementations based, for example, on superconducting devices strongly rely on the quality of the constituent materials. In this work, we fabricate and characterize superconducting planar resonators in the microwave range, made from aluminum films on silicon substrates. We study two samples, one of which is unprocessed and…
▽ More
Quantum computers are close to become a practical technology. Solid-state implementations based, for example, on superconducting devices strongly rely on the quality of the constituent materials. In this work, we fabricate and characterize superconducting planar resonators in the microwave range, made from aluminum films on silicon substrates. We study two samples, one of which is unprocessed and the other cleaned with a hydrofluoric acid bath and by heating at $880^{\circ}$C in high vacuum. We verify the efficacy of the cleaning treatment by means of scanning transmission electron microscope imaging of samples' cross sections. From 3 h-long resonator measurements at $\approx 10$ mK and with $\approx 10$ photonic excitations, we estimate the frequency flicker noise level using the Allan deviation and find an approximately tenfold noise reduction between the two samples; the cleaned sample shows a flicker noise power coefficient for the fractional frequency of $\approx 0.23 \times 10^{-15}$. Our preliminary results follow the generalized tunneling model for two-level state defects in amorphous dielectric materials and show that suitable cleaning treatments can help the operation of superconducting quantum computers.
△ Less
Submitted 30 April, 2019;
originally announced May 2019.
-
Substrate surface engineering for high-quality silicon/aluminum superconducting resonators
Authors:
C. T. Earnest,
J. H. Béjanin,
T. G. McConkey,
E. A. Peters,
A. Korinek,
H. Yuan,
M. Mariantoni
Abstract:
Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits' quality can be achieved by studying superconducting planar resonators. In this Paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films…
▽ More
Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits' quality can be achieved by studying superconducting planar resonators. In this Paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate treatments prior to aluminum deposition: One chemical treatment based on a hydrofluoric acid clean, one physical treatment consisting of a thermal annealing at 880 degree Celsius in high vacuum, one combined treatment comprising both the chemical and the physical treatments. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy acquiring electron energy loss spectroscopy maps of the samples' cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. We then study the quality of the resonators by means of microwave measurements in the "quantum regime", i.e., at a temperature T~10 mK and at a mean microwave photon number $\langle n_{\textrm{ph}} \rangle \sim 1$. In this regime, we find that both surface treatments independently improve the resonator's intrinsic quality factor and that the highest quality factor is obtained for the combined treatment, $Q_{\textrm{i}} \sim 0.8$ million. Finally, we find that the TLS quality factor averaged over a time period of 3 h is $\sim 3$ million at $\langle n_{\textrm{ph}} \rangle \sim 10$, indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle and vortex loss.
△ Less
Submitted 20 July, 2018;
originally announced July 2018.
-
Machine Learning Peeling and Loss Modelling of Time-Domain Reflectometry
Authors:
J. R. Rinehart,
J. H. Béjanin,
T. C. Fraser,
M. Mariantoni
Abstract:
A fundamental pursuit of microwave metrology is the determination of the characteristic impedance profile of microwave systems. Among other methods, this can be practically achieved by means of time-domain reflectometry (TDR) that measures the reflections from a device due to an applied stimulus. Conventional TDR allows for the measurement of systems comprising a single impedance. However, real sy…
▽ More
A fundamental pursuit of microwave metrology is the determination of the characteristic impedance profile of microwave systems. Among other methods, this can be practically achieved by means of time-domain reflectometry (TDR) that measures the reflections from a device due to an applied stimulus. Conventional TDR allows for the measurement of systems comprising a single impedance. However, real systems typically feature impedance variations that obscure the determination of all impedances subsequent to the first one. This problem has been studied previously and is generally known as scattering inversion or, in the context of microwave metrology, time-domain "peeling". In this article, we demonstrate the implementation of a space-time efficient peeling algorithm that corrects for the effect of prior impedance mismatch in a nonuniform lossless transmission line, regardless of the nature of the stimulus. We generalize TDR measurement analysis by introducing two tools: A stochastic machine learning clustering tool and an arbitrary lossy transmission line modeling tool. The former mitigates many of the imperfections typically plaguing TDR measurements (except for dispersion) and allows for an efficient processing of large datasets; the latter allows for a complete transmission line characterization including both conductor and dielectric loss.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Thin film metrology and microwave loss characterization of indium and aluminum/indium superconducting planar resonators
Authors:
C. R. H. McRae,
J. H. Béjanin,
C. T. Earnest,
T. G. McConkey,
J. R. Rinehart,
C. Deimert,
J. P. Thomas,
Z. R. Wasilewski,
M. Mariantoni
Abstract:
Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing materials losses is crucial to the improvement of qubit performance. A new material that has recently received particular attention is indium, a low-temperature supe…
▽ More
Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing materials losses is crucial to the improvement of qubit performance. A new material that has recently received particular attention is indium, a low-temperature superconductor that can be used to bond pairs of chips containing standard aluminum-based qubit circuitry. In this work, we characterize microwave loss in indium and aluminum/indium thin films on silicon substrates by measuring superconducting coplanar waveguide resonators and estimating the main loss parameters at powers down to the sub-photon regime and at temperatures between 10 and 450 mK. We compare films deposited by thermal evaporation, sputtering, and molecular beam epitaxy. We study the effects of heating in vacuum and ambient atmospheric pressure as well as the effects of pre-deposition wafer cleaning using hydrofluoric acid. The microwave measurements are supported by thin film metrology including secondary-ion mass spectrometry. For thermally evaporated and sputtered films, we find that two-level states (TLSs) are the dominating loss mechanism at low photon number and temperature. Thermally evaporated indium is determined to have a TLS loss tangent due to indium oxide of ~5x1e-05. The molecular beam epitaxial films show evidence of formation of a substantial indium-silicon eutectic layer, which leads to a drastic degradation in resonator performance.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Mitigating coherent leakage of superconducting qubits in a large-scale quantum socket
Authors:
T. G. McConkey,
J. H. Béjanin,
C. T. Earnest,
C. R. H. McRae,
Z. Pagel,
J. R. Rinehart,
M. Mariantoni
Abstract:
A practical quantum computer requires quantum bit (qubit) operations with low error rates in extensible architectures. We study a packaging method that makes it possible to address hundreds of superconducting qubits by means of three-dimensional wires: The large-scale quantum socket. A qubit chip is housed in a superconducting box, where both box and chip dimensions lead to unwanted modes that can…
▽ More
A practical quantum computer requires quantum bit (qubit) operations with low error rates in extensible architectures. We study a packaging method that makes it possible to address hundreds of superconducting qubits by means of three-dimensional wires: The large-scale quantum socket. A qubit chip is housed in a superconducting box, where both box and chip dimensions lead to unwanted modes that can interfere with qubit operations. We theoretically analyze these interference effects in the context of qubit coherent leakage. We propose two methods to mitigate the resulting errors by detuning the resonance frequency of the modes from the qubit frequency. We perform detailed electromagnetic field simulations indicating that the resonance frequency of the modes increases with the number of installed three-dimensional wires and can be engineered to be significantly higher than the highest qubit frequency. Finally, we show preliminary experimental results towards the implementation of a large-scale quantum socket.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Thermocompression Bonding Technology for Multilayer Superconducting Quantum Circuits
Authors:
C. R. H. McRae,
J. H. Béjanin,
Z. Pagel,
A. O. Abdallah,
T. G. McConkey,
C. T. Earnest,
J. R. Rinehart,
M. Mariantoni
Abstract:
Extensible quantum computing architectures require a large array of quantum devices operating with low error rates. A quantum processor based on superconducting quantum bits can be scaled up by stacking microchips that each perform different computational functions. In this article, we experimentally demonstrate a thermocompression bonding technology that utilizes indium films as a welding agent t…
▽ More
Extensible quantum computing architectures require a large array of quantum devices operating with low error rates. A quantum processor based on superconducting quantum bits can be scaled up by stacking microchips that each perform different computational functions. In this article, we experimentally demonstrate a thermocompression bonding technology that utilizes indium films as a welding agent to attach pairs of lithographically-patterned chips. We perform chip-to-chip indium bonding in vacuum at $190^{\circ}C$ with indium film thicknesses of $150 nm$. We characterize the dc and microwave performance of bonded devices at room and cryogenic temperatures. At $10 mK$, we find a dc bond resistance of $515 nΩmm^2$. Additionally, we show minimal microwave reflections and good transmission up to $6.8 GHz$ in a tunnel-capped, bonded device as compared to a similar uncapped device. As a proof of concept, we fabricate and measure a set of tunnel-capped superconducting resonators, demonstrating that our bonding technology can be used in quantum computing applications.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
The Quantum Socket: Three-Dimensional Wiring for Extensible Quantum Computing
Authors:
J. H. Béjanin,
T. G. McConkey,
J. R. Rinehart,
C. T. Earnest,
C. R. H. McRae,
D. Shiri,
J. D. Bateman,
Y. Rohanizadegan,
B. Penava,
P. Breul,
S. Royak,
M. Zapatka,
A. G. Fowler,
M. Mariantoni
Abstract:
Quantum computing architectures are on the verge of scalability, a key requirement for the implementation of a universal quantum computer. The next stage in this quest is the realization of quantum error correction codes, which will mitigate the impact of faulty quantum information on a quantum computer. Architectures with ten or more quantum bits (qubits) have been realized using trapped ions and…
▽ More
Quantum computing architectures are on the verge of scalability, a key requirement for the implementation of a universal quantum computer. The next stage in this quest is the realization of quantum error correction codes, which will mitigate the impact of faulty quantum information on a quantum computer. Architectures with ten or more quantum bits (qubits) have been realized using trapped ions and superconducting circuits. While these implementations are potentially scalable, true scalability will require systems engineering to combine quantum and classical hardware. One technology demanding imminent efforts is the realization of a suitable wiring method for the control and measurement of a large number of qubits. In this work, we introduce an interconnect solution for solid-state qubits: The quantum socket. The quantum socket fully exploits the third dimension to connect classical electronics to qubits with higher density and better performance than two-dimensional methods based on wire bonding. The quantum socket is based on spring-mounted micro wires the three-dimensional wires that push directly on a micro-fabricated chip, making electrical contact. A small wire cross section (~1 mmm), nearly non-magnetic components, and functionality at low temperatures make the quantum socket ideal to operate solid-state qubits. The wires have a coaxial geometry and operate over a frequency range from DC to 8 GHz, with a contact resistance of ~150 mohm, an impedance mismatch of ~10 ohm, and minimal crosstalk. As a proof of principle, we fabricated and used a quantum socket to measure superconducting resonators at a temperature of ~10 mK.
△ Less
Submitted 31 May, 2016;
originally announced June 2016.
