-
Universal End-to-End Neural Network for Lossy Image Compression
Authors:
Bouzid Arezki,
Fangchen Feng,
Anissa Mokraoui
Abstract:
This paper presents variable bitrate lossy image compression using a VAE-based neural network. An adaptable image quality adjustment strategy is proposed. The key innovation involves adeptly adjusting the input scale exclusively during the inference process, resulting in an exceptionally efficient rate-distortion mechanism. Through extensive experimentation, across diverse VAE-based compression ar…
▽ More
This paper presents variable bitrate lossy image compression using a VAE-based neural network. An adaptable image quality adjustment strategy is proposed. The key innovation involves adeptly adjusting the input scale exclusively during the inference process, resulting in an exceptionally efficient rate-distortion mechanism. Through extensive experimentation, across diverse VAE-based compression architectures (CNN, ViT) and training methodologies (MSE, SSIM), our approach exhibits remarkable universality. This success is attributed to the inherent generalization capacity of neural networks. Unlike methods that adjust model architecture or loss functions, our approach emphasizes simplicity, reducing computational complexity and memory requirements. The experiments not only highlight the effectiveness of our approach but also indicate its potential to drive advancements in variable-rate neural network lossy image compression methodologies.
△ Less
Submitted 10 September, 2024;
originally announced September 2024.
-
Convolutional Transformer-Based Image Compression
Authors:
Bouzid Arezki,
Fangchen Feng,
Anissa Mokraoui
Abstract:
In this paper, we present a novel transformer-based architecture for end-to-end image compression. Our architecture incorporates blocks that effectively capture local dependencies between tokens, eliminating the need for positional encoding by integrating convolutional operations within the multi-head attention mechanism. We demonstrate through experiments that our proposed framework surpasses sta…
▽ More
In this paper, we present a novel transformer-based architecture for end-to-end image compression. Our architecture incorporates blocks that effectively capture local dependencies between tokens, eliminating the need for positional encoding by integrating convolutional operations within the multi-head attention mechanism. We demonstrate through experiments that our proposed framework surpasses state-of-the-art CNN-based architectures in terms of the trade-off between bit-rate and distortion and achieves comparable results to transformer-based methods while maintaining lower computational complexity.
△ Less
Submitted 6 September, 2024;
originally announced September 2024.
-
Efficient Image Compression Using Advanced State Space Models
Authors:
Bouzid Arezki,
Anissa Mokraoui,
Fangchen Feng
Abstract:
Transformers have led to learning-based image compression methods that outperform traditional approaches. However, these methods often suffer from high complexity, limiting their practical application. To address this, various strategies such as knowledge distillation and lightweight architectures have been explored, aiming to enhance efficiency without significantly sacrificing performance. This…
▽ More
Transformers have led to learning-based image compression methods that outperform traditional approaches. However, these methods often suffer from high complexity, limiting their practical application. To address this, various strategies such as knowledge distillation and lightweight architectures have been explored, aiming to enhance efficiency without significantly sacrificing performance. This paper proposes a State Space Model-based Image Compression (SSMIC) architecture. This novel architecture balances performance and computational efficiency, making it suitable for real-world applications. Experimental evaluations confirm the effectiveness of our model in achieving a superior BD-rate while significantly reducing computational complexity and latency compared to competitive learning-based image compression methods.
△ Less
Submitted 5 September, 2024; v1 submitted 4 September, 2024;
originally announced September 2024.
-
Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
C. Adams,
G. Agnetta,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
J. Alfaro,
R. Alfaro,
A. J. Allafort,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner
, et al. (1387 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
Experimental demonstration of a crossed cubes nuller for coronagraphy and interferometry
Authors:
Francois Henault,
Brahim Arezki,
Guillaume Bourdarot,
Alain Spang
Abstract:
In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory.…
▽ More
In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory. It is cheap, compact, and easy to align. The results demonstrate a high extinction rate in monochromatic light and confirm that the device is insensitive to its polarization state. Finally, the first lessons from the experiment are summarized and discussed in view of future space missions searching for extra-solar planets located in the habitable zone, either based on a coronagraphic telescope or a sparse-aperture nulling interferometer
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Advances in the Development of Mid-Infrared Integrated Devices for Interferometric Arrays
Authors:
L. Labadie,
Guillermo Martin,
Airan Rodenas,
Norman C. Anheier,
Brahim Arezki,
Robert R. Thomson,
Hong A. Qiao,
Pierre Kern,
Ajoy K. Kar,
Bruce E. Bernacki
Abstract:
This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and analyzed.
This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and analyzed.
△ Less
Submitted 19 July, 2012;
originally announced July 2012.
-
Three-dimensional mid-infrared photonic circuits in chalcogenide glass
Authors:
Airan Rodenas,
Guillermo Martin,
Brahim Arezki,
Nicholas D. Psaila,
Gin Jose,
Animesh Jha,
Lucas Labadie,
Piern Kern,
Ajoy K. Kar,
Robert R. Thomson
Abstract:
We report the fabrication of single mode buried channel waveguides for the whole mid-infrared transparency range of chalcogenide sulphide glasses by means of direct laser writing. We have explored the potential of this technology by fabricating a prototype three-dimensional three-beam combiner for future application in stellar interferometry, which delivers a monochromatic interference visibility…
▽ More
We report the fabrication of single mode buried channel waveguides for the whole mid-infrared transparency range of chalcogenide sulphide glasses by means of direct laser writing. We have explored the potential of this technology by fabricating a prototype three-dimensional three-beam combiner for future application in stellar interferometry, which delivers a monochromatic interference visibility of 99.89% at 10.6 \mum, and an ultrahigh bandwidth (3-11 \mum) interference visibility of 21.3%. These results demonstrate that it is possible to harness the whole transparency range offered by chalcogenide glasses on a single on-chip instrument by means of direct laser writing, a finding that may be of key significance in future technologies such as astrophotonics and biochemical sensing.
△ Less
Submitted 12 December, 2011;
originally announced December 2011.
-
First fringes with an integrated-optics beam combiner at 10 um - A new step towards instrument miniaturization for mid-infrared interferometry
Authors:
Lucas Labadie,
Guillermo Martin,
Norman C. Anheier,
Brahim Arezki,
H. A. Qiao,
Bruce Bernacki,
Pierre Kern
Abstract:
Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or space-based multi-aperture infrared interferometry is a promising technique to tackle these goals. But significant efforts still need to be undertaken to achieve a si…
▽ More
Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or space-based multi-aperture infrared interferometry is a promising technique to tackle these goals. But significant efforts still need to be undertaken to achieve a simplification of these instruments if we want to combine the light from a large number of telescopes. Integrated-optics appears as an alternative to the current conventional designs, especially if its use can be extended to a higher number of astronomical bands. This article reports for the first time the experimental demonstration of the feasibility of an integrated-optics approach to mid-infrared beam combination for single-mode stellar interferometry. We have fabricated a 2-telescope beam combiner prototype integrated on a substrate of chalcogenide glasses, a material transparent from 1 to 14 um. We have developed laboratory tools to characterize the modal properties and the interferometric capabilities of our device. We obtain fringes at 10 um and measure a mean contrast V=0.981 \pm 0.001 with high repeatability over one week and high stability over 5h. We show experimentally - as well as on the basis of modeling considerations - that the component has a single-mode behavior at this wavelength, which is essential to achieve high-accuracy interferometry. From previous studies, the propagation losses are estimated to 0.5 dB/cm for such components. We also discuss possible issues that may impact the interferometric contrast. The IO beam combiner performs well at 10. We also anticipate the requirement of a better matching between the numerical apertures of the component and the (de)coupling optics to optimize the total throughput. The next step foreseen is the achievement of wide-band interferograms.
△ Less
Submitted 14 April, 2011;
originally announced April 2011.
-
Transmission behaviors of single mode hollow metallic waveguides dedicated to mid-infrared nulling interferometry
Authors:
Laetitia Abel-Tiberini,
Lucas Labadie,
Brahim Arezki,
Pierre Kern,
Romain Grille,
Pierre Labeye,
Jean-Emmanuel Broquin
Abstract:
This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect abs…
▽ More
This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect absorption in addition to the roughness of the waveguide metallic walls. The input and output coupling efficiency of our samples has been improved by adding tapers to minimize the impedance mismatch. A proper distinction between propagation losses and coupling losses is presented. Despite their elevate propagation losses, HMW show excellent spatial filtering capabilities in a spectral range where photonics technologies are only emerging.
△ Less
Submitted 15 January, 2008;
originally announced January 2008.
-
Mid-infrared laser light nulling experiment using single-mode conductive waveguides
Authors:
L. Labadie,
E. Le Coarer,
R. Maurand,
P. Labeye,
P. Kern,
B. Arezki,
J. -E. Broquin
Abstract:
Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift u…
▽ More
Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift using a translating mirror, dynamic and static measurements of the nulling ratio are performed in the two cases where modal filtering is implemented and suppressed. No additional active control of the wavefront errors is involved. Results: We achieve on average a statistical nulling ratio of 2.5e-4 with a 1-sigma upper limit of 6e-4, while a best null of 5.6e-5 is obtained in static mode. At the moment, the impact of external vibrations limits our ability to maintain the null to 10 to 20 seconds.; Conclusions: A positive effect of SM conductive waveguide on modal filtering has been observed in this study. Further improvement of the null should be possible with proper mechanical isolation of the setup.
△ Less
Submitted 1 May, 2007;
originally announced May 2007.
-
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
Authors:
F. Millour,
R. G. Petrov,
O. Chesneau,
D. Bonneau,
L. Dessart,
C. Bechet,
I. Tallon-Bosc,
M. Tallon,
E. Thiébaut,
F. Vakili,
F. Malbet,
D. Mourard,
G. Zins,
A. Roussel,
S. Robbe-Dubois,
P. Puget,
K. Perraut,
F. Lisi,
E. Le Coarer,
S. Lagarde,
P. Kern,
L. Glück,
G. Duvert,
A. Chelli,
Y. Bresson
, et al. (73 additional authors not shown)
Abstract:
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret thes…
▽ More
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.
△ Less
Submitted 31 October, 2006;
originally announced October 2006.
-
M-lines characterization of selenide and telluride waveguides for mid-infrared interferometry
Authors:
Lucas Labadie,
Caroline Vigreux-Bercovici,
Annie Pradel,
Pierre Kern,
Brahim Arezki,
Jean-Emmanuel Broquin
Abstract:
Nulling interferometry is an astronomical technique that combines equal wavefronts to achieve a deep rejection ratio of an on-axis star, and that could permit to detect Earth-like planets in the mid-infrared band 5 -- 20 microns. Similarly to what is done in the near-infrared, high frequencies spatial filtering of the incoming beams can be achieved using single-mode waveguides operating in the m…
▽ More
Nulling interferometry is an astronomical technique that combines equal wavefronts to achieve a deep rejection ratio of an on-axis star, and that could permit to detect Earth-like planets in the mid-infrared band 5 -- 20 microns. Similarly to what is done in the near-infrared, high frequencies spatial filtering of the incoming beams can be achieved using single-mode waveguides operating in the mid-infrared. An appreciable reduction of the instrumental complexity is also possible using integrated optics (IO) devices in this spectral range. The relative lack of single-mode guided optics in the mid-infrared has motivated the present technological study to demonstrate the feasibility of dielectric waveguides functioning at longer wavelengths. We propose to use selenide and telluride components to pursue the development of more complex IO functions.
△ Less
Submitted 9 August, 2006;
originally announced August 2006.
-
Modal Filtering for Nulling Interferometry-First Single-Mode Conductive Waveguides in the Mid-Infrared
Authors:
L. Labadie,
P. Labeye,
P. Kern,
I. Schanen,
B. Arezki,
J. -E. Broquin
Abstract:
This paper presents the work achieved for the manufacturing and characterization of first single-mode waveguides to be used as modal filters for nulling interferometry in the mid-infrared range [4-20 um]. As very high dynamic range is mandatory for detection of Earth-like planets, modal filtering is one of the most stringent instrumental aspects. The hollow metallic waveguides (HMW) presented he…
▽ More
This paper presents the work achieved for the manufacturing and characterization of first single-mode waveguides to be used as modal filters for nulling interferometry in the mid-infrared range [4-20 um]. As very high dynamic range is mandatory for detection of Earth-like planets, modal filtering is one of the most stringent instrumental aspects. The hollow metallic waveguides (HMW) presented here are manufactured using micro-machining techniques. Single-mode behavior has been investigated in laboratory through a technique of polarization analysis while transmission features have been measured using flux relative comparison. The single-mode behavior have been assessed at lambda=10.6 um for rectangular waveguides with dimensions a=10 um and b<5.3 um with an accuracy of ~2.5 %. The tests have shown that a single-polarization state can be maintained in the waveguide. A comparison with results on multi-mode HMW is proposed. Excess losses of 2.4 dB (~ 58 % transmission) have been measured for a single-mode waveguide. In particular, the importance of coupling conditions into the waveguide is emphasized here. The goal of manufacturing and characterizing the first single-mode HMW for the mid-infrared has been achieved. This opens the road to the use of integrated optics for interferometry in the mentioned spectral range.
△ Less
Submitted 10 November, 2005;
originally announced November 2005.
