-
Polystyrene clusters captured by acoustic tweezers spontaneously rupturing
Authors:
Saeedeh Kabiri,
Amir Ghavidel,
Sanaz Derikvandi,
Fatemeh Rezaei,
Ahmad Amjadi
Abstract:
Numerous investigations have demonstrated that standing acoustic waves can trap particles that range in size from microns to millimeters. Powerful tweezers may trap clusters of particles rather than single ones because their trapping radius is substantially larger than the size of the trapped particle. In this study, clusters of polystyrene particles measuring 450 microns in size that were suspend…
▽ More
Numerous investigations have demonstrated that standing acoustic waves can trap particles that range in size from microns to millimeters. Powerful tweezers may trap clusters of particles rather than single ones because their trapping radius is substantially larger than the size of the trapped particle. In this study, clusters of polystyrene particles measuring 450 microns in size that were suspended in an ionic surfactant solution were trapped at the nodes of acoustic standing waves. The correlation between surfactant concentration and threshold radius is examined, and potential mechanisms that could be responsible for the phenomenon are investigated. The findings demonstrated that adding polystyrene made clusters unstable and caused them to spontaneously rupture. Additionally, studies revealed that the cluster began to undergo spontaneous sequential ruptures after its radius above a particular threshold.
△ Less
Submitted 5 February, 2023;
originally announced February 2023.
-
Cooperative Pollution Source Localization and Cleanup with a Bio-inspired Swarm Robot Aggregation
Authors:
Arash S. Amjadi,
Mohsen Raoufi,
Ali E. Turgut,
George Broughton,
Tomáš Krajník,
Farshad Arvin
Abstract:
Using robots for exploration of extreme and hazardous environments has the potential to significantly improve human safety. For example, robotic solutions can be deployed to find the source of a chemical leakage and clean the contaminated area. This paper demonstrates a proof-of-concept bio-inspired exploration method using a swarm robotic system, which is based on a combination of two bio-inspire…
▽ More
Using robots for exploration of extreme and hazardous environments has the potential to significantly improve human safety. For example, robotic solutions can be deployed to find the source of a chemical leakage and clean the contaminated area. This paper demonstrates a proof-of-concept bio-inspired exploration method using a swarm robotic system, which is based on a combination of two bio-inspired behaviours: aggregation, and pheromone tracking. The main idea of the work presented is to follow pheromone trails to find the source of a chemical leakage and then carry out a decontamination task by aggregating at the critical zone. Using experiments conducted by a simulated model of a Mona robot, we evaluate the effects of population size and robot speed on the ability of the swarm in a decontamination task. The results indicate the feasibility of deploying robotic swarms in an exploration and cleaning task in an extreme environment.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
In-pipe leak detection by Minimum Residual complexity: A Robust time Delay Estimation method against correlated noise
Authors:
A. M. Ahmadi,
A. Amjadi,
A. R. Bahrampour,
H. Ravanbod
Abstract:
In this work, the residual complexity (RC) similarity measure, is employed for time delay estimation (TDE) in gas pipe leak localization. The properties of TDE by RC is compared with those of Cross Correlation(CC) and Mutual Information(MI) similarity measures on our experimental data. The comparison confirms the advantages of RC relative to CC and MI, in robustness against both correlated noises…
▽ More
In this work, the residual complexity (RC) similarity measure, is employed for time delay estimation (TDE) in gas pipe leak localization. The properties of TDE by RC is compared with those of Cross Correlation(CC) and Mutual Information(MI) similarity measures on our experimental data. The comparison confirms the advantages of RC relative to CC and MI, in robustness against both correlated noises and reduction of number of samples. These advantages originate from not only its mathematical nature of RC similarity measure which considers inter-dependency but also from broadband frequency of acoustic waves propagating during gas pipes.
△ Less
Submitted 26 August, 2013; v1 submitted 13 July, 2013;
originally announced July 2013.
-
Liquid soap film generates electricity
Authors:
Ahmad Amjadi,
Sadegh Feiz,
Reza Montazeri Namin
Abstract:
We have observed that a rotating liquid soap film generates electricity when placed between two non-contact electrodes with a sufficiently large potential difference. In our experiments suspended liquid film (water + soap film) is formed on the surface of a circular frame, which is forced to rotate in the $x-y$ horizontal plane by a motor. This system is located at the center of two capacitor-like…
▽ More
We have observed that a rotating liquid soap film generates electricity when placed between two non-contact electrodes with a sufficiently large potential difference. In our experiments suspended liquid film (water + soap film) is formed on the surface of a circular frame, which is forced to rotate in the $x-y$ horizontal plane by a motor. This system is located at the center of two capacitor-like vertical plates to apply an external electric voltage difference in the $x-$direction. The produced electric current is collected from the liquid film using two conducting electrodes that are separated in the $y-$direction. We previously reported that a liquid film in an external electric field rotates when an electric current passes through it, naming it the liquid film motor (LFM). In this paper we report a novel technique, in which a similar device can be used as an electric generator, converting the rotating mechanical energy to electrical energy. The liquid film electric generator (LFEG) is in stark contrast to the LFM, both of which could be designed similarly in very small scales like micro scales with different applications. Although the device is comparable to commercial electric motors or electric generators, there is a significant difference in their working principles. Usually in an electric motor or generator the magnetic field causes the driving force, while in a LFM or LFEG the Coulomb force is the driving force. This fact is also interesting from the Bio-science point of view and brings a similarity to bio motors. Here we have investigated the electrical characteristics of such a generator for the first time experimentally and modelled the phenomenon with electroconvection governing equations. A numerical simulation is performed using the local approximation for the charge-potential relation and results are in qualitative agreement with experiments.
△ Less
Submitted 24 April, 2014; v1 submitted 30 May, 2013;
originally announced May 2013.
-
States of motion in an AC liquid film motor: experiments and theory
Authors:
Ahmad Amjadi,
Rana Nazifi,
Reza Montazeri Namin,
Mahsa Mokhtarzadeh
Abstract:
The liquid film motor (LFM) is a simple device which serves as a laboratory to conduct experimental research in basic theoretical studies of electrohydrodynamics (EHD). In addition the LFM can play an important role in technological applications such as micro mixers and washers. In this paper we initially performed experiments to examine the theory regarding rotation and vibration of an AC LFM. Wh…
▽ More
The liquid film motor (LFM) is a simple device which serves as a laboratory to conduct experimental research in basic theoretical studies of electrohydrodynamics (EHD). In addition the LFM can play an important role in technological applications such as micro mixers and washers. In this paper we initially performed experiments to examine the theory regarding rotation and vibration of an AC LFM. While many theoretical predictions are in agreement with our experimental data, but in the threshold of vibration there is an obvious disagreement; we showed that no threshold exists and oscillation is observed in any field value. Experimental evidence showed the existence of an elastic deformation in water before reaching the yield stress and lead us to the use of the elastic Bingham fluid model. We revised the theories using this model and investigated the behaviour of a vibrating LFM which has more applications in mixing. We applied a numerical solution to derive different phases of vibration and distinguish between elastic and plastic vibrations, the latter which could be used for mixing.
△ Less
Submitted 8 May, 2013;
originally announced May 2013.
-
Electro/Magnetically Induced Controllable Rotation In Small-scale Liquid Flow
Authors:
A. Amjadi,
A. Nejati,
S. O. Sobhani,
R. Shirsavar
Abstract:
We study all the possibilities of producing rotating flow in an incompressible fluid by electric and magnetic fields. We start with a general theoretical basis and look for different configurations and set-ups which electric/magnetic field and an electric current affect the vorticity of fluid resulting in rotation on liquid flow. We assume steady-state conditions and time-independent electric and…
▽ More
We study all the possibilities of producing rotating flow in an incompressible fluid by electric and magnetic fields. We start with a general theoretical basis and look for different configurations and set-ups which electric/magnetic field and an electric current affect the vorticity of fluid resulting in rotation on liquid flow. We assume steady-state conditions and time-independent electric and magnetic fields as the external body torque. Regarding the theoretical basis, we propose three experimental set-ups in which by applying fields on a fluid, rotational vortices are produced: (a) a uniform electric field and a uniform electric current, (b) a uniform electric current and a non-uniform magnetic field, and (c) a non-uniform electric current and a uniform magnetic field. The first case has been reported in detail named "Liquid Film Motor". The two other cases are experimentally investigated here for a cubic an cylindrical cells. The rotational velocity patterns are obtained by PIV technique, and the results are discussed and justified by a preliminary estimation based on the torque exerted by magnetic fields on electric currents. From the log-log plot of angular velocity versus current, the non-linearity factors of the rotational flow for cylindrical and rectangular geometries are obtained.
△ Less
Submitted 22 March, 2013;
originally announced March 2013.
-
Experimental investigation of the stability of the floating water bridge
Authors:
Reza Montazeri Namin,
Ahmad Amjadi,
Shiva Azizpour Lindi,
Nima Jafari,
Peyman Irajizad
Abstract:
When a high voltage is applied between two beakers filled with deionized water, a bridge of water may be formed in between exceeding the length of 2 cm when the beakers are pulled apart. We construct experiments in which the geometry and the electric field within the bridge are measured and compared with predictions of theories on the floating water bridge. A numerical simulation is used for the m…
▽ More
When a high voltage is applied between two beakers filled with deionized water, a bridge of water may be formed in between exceeding the length of 2 cm when the beakers are pulled apart. We construct experiments in which the geometry and the electric field within the bridge are measured and compared with predictions of theories on the floating water bridge. A numerical simulation is used for the measurement of the electric field. Our experimental results approve that two forces of dielectric tension and surface tension are holding the bridge against gravity. These forces have the same order of magnitude. Results show that the stability can be explained by macroscopic forces, regardless of the microscopic changes in water structure.
△ Less
Submitted 11 March, 2013; v1 submitted 10 October, 2012;
originally announced October 2012.
-
A Liquid Film Motor
Authors:
A. Amjadi,
R. Shirsavar,
N. Hamedani Radja,
M. R. Ejtehadi
Abstract:
It is well known that electro-hydrodynamical effects in freely suspended liquid films can flow the liquid. Here we report a purely electrically driven rotation in water and some other liquid suspended films with full control on the velocity and the chirality of the rotating vortices. The device, which is called ``film motor'', consists of a quasi two-dimensional electrolysis cell in an external…
▽ More
It is well known that electro-hydrodynamical effects in freely suspended liquid films can flow the liquid. Here we report a purely electrically driven rotation in water and some other liquid suspended films with full control on the velocity and the chirality of the rotating vortices. The device, which is called ``film motor'', consists of a quasi two-dimensional electrolysis cell in an external in-plane electric field, crossing the mean electrolysis current density. If either the external field or the electrolysis voltage exceeds some threshold (while the other one is not zero), the liquid film begins to rotate. The device works perfectly with both DC and AC fields.
△ Less
Submitted 26 May, 2008; v1 submitted 5 May, 2008;
originally announced May 2008.
-
Analysis and Design of an Organic High Speed Digital Electro-Optic Switch
Authors:
Ali Akbar Wahedy Zarch,
Hassan Kaatuzian,
Ahmad Ajdarzadeh Oskouei,
Ahmad Amjadi
Abstract:
We have analyzed and designed an organic high speed digital optical switch (DOS) based on transverse electro-optic effect. In analysis section, we proposed a quantum photonic model (QPM) to explain linear electro-optic (EO) effect. This model interpret this effect by photon-electron interaction in attosecond regime. We simulate applied electric field on molecule and crystal by Monte-Carlo method…
▽ More
We have analyzed and designed an organic high speed digital optical switch (DOS) based on transverse electro-optic effect. In analysis section, we proposed a quantum photonic model (QPM) to explain linear electro-optic (EO) effect. This model interpret this effect by photon-electron interaction in attosecond regime. We simulate applied electric field on molecule and crystal by Monte-Carlo method in time domain. We show how a waveguide response to an optical signal with different wavelengths when a transverse electric field applied to the waveguide. In design section, we configure conceptually a 2 * 2 EO switch with full adiabatic coupler. In this DOS, we use a rib waveguides that its core has been constructed from NPP crystal. This switch is smaller at least to one-half of similar DOS in dimensions.
△ Less
Submitted 9 May, 2007;
originally announced May 2007.
-
Electro-Optic Effect Explanation with Quantum Photonic Model
Authors:
Hassan Kaatuzian,
AliAkbar Wahedy Zarch,
Ahmad Amjadi,
Ahmad Ajdarzadeh Oskouei
Abstract:
In this paper, we have explained transverse electro-optic effect by quantum-photonic model (QPM). This model interpret this effect by photon-electron interaction in attosecond regime. We simulate applied electric field on molecule and crystal by Monte-Carlo method in time domain when a light beam is propagated through the waveguide. We show how the waveguide response to an optical signal with di…
▽ More
In this paper, we have explained transverse electro-optic effect by quantum-photonic model (QPM). This model interpret this effect by photon-electron interaction in attosecond regime. We simulate applied electric field on molecule and crystal by Monte-Carlo method in time domain when a light beam is propagated through the waveguide. We show how the waveguide response to an optical signal with different wavelengths when a transverse electric field applied to the waveguide.
△ Less
Submitted 9 May, 2007; v1 submitted 8 May, 2007;
originally announced May 2007.
-
A water film motor
Authors:
R. Shirsavar,
A. Amjadi,
N. Hamedani Radja,
M. D. Niry,
M. Reza Rahimi Tabar,
M. R. Ejtehadi
Abstract:
We report on electrically-induced rotations in water films, which can function at many length scales. The device consists of a two-dimensional cell used for electrolysis of water films, as simple as an insulator frame with two electrodes on the sides, to which an external in-plane electric field perpendicular to the mean electrolysis current density is applied. If either the external field or th…
▽ More
We report on electrically-induced rotations in water films, which can function at many length scales. The device consists of a two-dimensional cell used for electrolysis of water films, as simple as an insulator frame with two electrodes on the sides, to which an external in-plane electric field perpendicular to the mean electrolysis current density is applied. If either the external field or the electrolysis current exceeds some threshold (while the other one is not zero), the liquid film begins to rotate.
△ Less
Submitted 1 May, 2006;
originally announced May 2006.
