-
Model-aided Geometrical Shaping of Dual-polarization 4D Formats in the Nonlinear Fiber Channel
Authors:
Gabriele Liga,
Bin Chen,
Alex Alvarado
Abstract:
The geometry of dual-polarization four-dimensional constellations is optimized in the optical fiber channel using a recent nonlinear interference model. A 0.27 bit/4D rate gain and 13% reach increase are attained compared to polarization-multiplexed formats.
The geometry of dual-polarization four-dimensional constellations is optimized in the optical fiber channel using a recent nonlinear interference model. A 0.27 bit/4D rate gain and 13% reach increase are attained compared to polarization-multiplexed formats.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Capacity Region Bounds for the K user Dispersive Nonlinear Optical WDM Channel with Peak Power Constraints
Authors:
Viswanathan Ramachandran,
Gabriele Liga,
Astrid Barreiro,
Alex Alvarado
Abstract:
It is known that fiber nonlinearities induce crosstalk in a wavelength division multiplexed (WDM) system, which limits the capacity of such systems as the transmitted signal power is increased. A network user in a WDM system is an entity that operates around a given optical wavelength. Traditionally, the channel capacity of a WDM system has been analyzed under different assumptions for the transmi…
▽ More
It is known that fiber nonlinearities induce crosstalk in a wavelength division multiplexed (WDM) system, which limits the capacity of such systems as the transmitted signal power is increased. A network user in a WDM system is an entity that operates around a given optical wavelength. Traditionally, the channel capacity of a WDM system has been analyzed under different assumptions for the transmitted signals of the other users, while treating the interference arising from these users as noise. In this paper, we instead take a multiuser information theoretic view and treat the optical WDM system impaired by cross-phase modulation and dispersion as an interference channel. We characterize an outer bound on the capacity region of simultaneously achievable rate pairs, assuming a simplified K-user perturbative channel model using genie-aided techniques. Furthermore, an achievable rate region is obtained by time-sharing between certain single-user strategies. It is shown that such time-sharing can achieve better rate tuples compared to treating nonlinear interference as noise. For the single-polarization single-span system under consideration and a power 4.4 dB above the optimum launch power, treating nonlinear interference as noise results in a rate of 1.67 bit/sym, while time-sharing gives a rate of 6.33 bit/sym.
△ Less
Submitted 6 June, 2022; v1 submitted 18 October, 2021;
originally announced October 2021.
-
List-encoding CCDM: A Nonlinearity-tolerant Shaper Aided by Energy Dispersion Index
Authors:
Kaiquan Wu,
Gabriele Liga,
Alireza Sheikh,
Yunus Can Gültekin,
Frans M. J. Willems,
Alex Alvarado
Abstract:
Recently, a metric called energy dispersion index (EDI) was proposed to indicate the nonlinear interference (NLI) induced by correlated symbols during optical transmission. In this paper, we propose a new shaper architecture to decrease the EDI of transmitted symbols and thus, increase the signal-to-noise ratio (SNR). We call this shaper the list-encoding constant-composition distribution matcher…
▽ More
Recently, a metric called energy dispersion index (EDI) was proposed to indicate the nonlinear interference (NLI) induced by correlated symbols during optical transmission. In this paper, we propose a new shaper architecture to decrease the EDI of transmitted symbols and thus, increase the signal-to-noise ratio (SNR). We call this shaper the list-encoding constant-composition distribution matcher (L-CCDM). L-CCDM consists of an additional EDI selecting module, which is compatible with standard probabilistic amplitude shaping (PAS) architecture. Numerical results obtained from a multi-span multi-channel system show that when compared to standard CCDM with 256-ary quadrature amplitude modulation (256QAM), the proposed architecture offers an effective SNR gain of 0.35 dB, an achievable information rate gain of 0.22 bit/4D-symbol, or equivalently an 8% reach extension.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
On Kurtosis-limited Enumerative Sphere Shaping for Reach Increase in Single-span Systems
Authors:
Yunus Can Gültekin,
Alex Alvarado,
Olga Vassilieva,
Inwoong Kim,
Paparao Palacharla,
Chigo M. Okonkwo,
Frans M. J. Willems
Abstract:
The effect of decreasing the kurtosis of channel inputs is investigated for the first time with an algorithmic shaping implementation. No significant gains in decoding performance are observed for multi-span systems, while an increase in reach is obtained for single-span transmission.
The effect of decreasing the kurtosis of channel inputs is investigated for the first time with an algorithmic shaping implementation. No significant gains in decoding performance are observed for multi-span systems, while an increase in reach is obtained for single-span transmission.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Real-time Transmission of Geometrically-shaped Signals using a Software-defined GPU-based Optical Receiver
Authors:
Sjoerd van der Heide,
Ruben S. Luis,
Sebastiaan Goossens,
Benjamin J. Puttnam,
Georg Rademacher,
Ton Koonen,
Satoshi Shinada,
Yoshinari Awaji,
Alex Alvarado,
Hideaki Furukawa,
Chigo Okonkwo
Abstract:
A software-defined optical receiver is implemented on an off-the-shelf commercial graphics processing unit (GPU). The receiver provides real-time signal processing functionality to process 1 GBaud minimum phase (MP) 4-, 8-, 16-, 32-, 64-, 128-ary quadrature amplitude modulation (QAM) as well as geometrically shaped (GS) 8- and 128-QAM signals using Kramers-Kronig (KK) coherent detection. Experimen…
▽ More
A software-defined optical receiver is implemented on an off-the-shelf commercial graphics processing unit (GPU). The receiver provides real-time signal processing functionality to process 1 GBaud minimum phase (MP) 4-, 8-, 16-, 32-, 64-, 128-ary quadrature amplitude modulation (QAM) as well as geometrically shaped (GS) 8- and 128-QAM signals using Kramers-Kronig (KK) coherent detection. Experimental validation of this receiver over a 91~km field-deployed optical fiber link between two Tokyo locations is shown with detailed optical signal-to-noise ratio (OSNR) investigations. A net data rate of 5 Gbps using 64-QAM is demonstrated.
△ Less
Submitted 28 March, 2022; v1 submitted 16 August, 2021;
originally announced August 2021.
-
Orthogonal Time Frequency Space Modulation: A Discrete Zak Transform Approach
Authors:
Franz Lampel,
Alex Alvarado,
Frans M. J. Willems
Abstract:
In orthogonal time frequency space (OTFS) modulation, information-carrying symbols reside in the delay-Doppler (DD) domain. By operating in the DD domain, an appealing property for communication arises: time-frequency (TF) dispersive channels encountered in high mobility environments become time-invariant. The time-invariance of the channel in the DD domain enables efficient equalizers for time-fr…
▽ More
In orthogonal time frequency space (OTFS) modulation, information-carrying symbols reside in the delay-Doppler (DD) domain. By operating in the DD domain, an appealing property for communication arises: time-frequency (TF) dispersive channels encountered in high mobility environments become time-invariant. The time-invariance of the channel in the DD domain enables efficient equalizers for time-frequency dispersive channels. In this paper, we propose an OTFS system based on the discrete Zak transform. The presented formulation not only allows an efficient implementation of OTFS but also simplifies the derivation and analysis of the input-output relation of TF dispersive channel in the DD domain.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
A Data-driven Optimization of First-order Regular Perturbation Coefficients for Fiber Nonlinearities
Authors:
Astrid Barreiro,
Gabriele Liga,
Alex Alvarado
Abstract:
We study the performance of gradient-descent optimization to estimate the coefficients of the discrete-time first-order regular perturbation (FRP). With respect to numerically computed coefficients, the optimized coefficients yield a model that (i) extends the FRP range of validity, and (ii) reduces the model's complexity.
We study the performance of gradient-descent optimization to estimate the coefficients of the discrete-time first-order regular perturbation (FRP). With respect to numerically computed coefficients, the optimized coefficients yield a model that (i) extends the FRP range of validity, and (ii) reduces the model's complexity.
△ Less
Submitted 9 January, 2023; v1 submitted 9 June, 2021;
originally announced June 2021.
-
Exponentially-Weighted Energy Dispersion Index for the Nonlinear Interference Analysis of Finite-Blocklength Shaping
Authors:
Kaiquan Wu,
Gabriele Liga,
Yunus Can Gültekin,
Alex Alvarado
Abstract:
A metric called exponentially-weighted energy dispersion index (EEDI) is proposed to explain the blocklength-dependent effective signal-to-noise ratio (SNR) in probabilistically shaped fiber-optic systems. EEDI is better than energy dispersion index (EDI) at capturing the dependency of the effective SNR on the blocklength for long-distance transmission.
A metric called exponentially-weighted energy dispersion index (EEDI) is proposed to explain the blocklength-dependent effective signal-to-noise ratio (SNR) in probabilistically shaped fiber-optic systems. EEDI is better than energy dispersion index (EDI) at capturing the dependency of the effective SNR on the blocklength for long-distance transmission.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
A Capacity Region Outer Bound for the Two-User Perturbative Nonlinear Fiber Optical Channel
Authors:
Viswanathan Ramachandran,
Astrid Barreiro,
Gabriele Liga,
Alex Alvarado
Abstract:
We study a nonlinear fiber optical channel impaired by cross-phase modulation and dispersion from the viewpoint of an interference channel. We characterize an outer bound on the capacity region of simultaneously achievable rate pairs, assuming a two-user perturbative channel model.
We study a nonlinear fiber optical channel impaired by cross-phase modulation and dispersion from the viewpoint of an interference channel. We characterize an outer bound on the capacity region of simultaneously achievable rate pairs, assuming a two-user perturbative channel model.
△ Less
Submitted 5 July, 2021; v1 submitted 31 May, 2021;
originally announced May 2021.
-
Kurtosis-limited Sphere Shaping for Nonlinear Interference Noise Reduction in Optical Channels
Authors:
Yunus Can Gültekin,
Alex Alvarado,
Olga Vassilieva,
Inwoong Kim,
Paparao Palacharla,
Chigo Okonkwo,
Frans M. J. Willems
Abstract:
Nonlinear interference (NLI) generated during the propagation of an optical waveform through the fiber depends on the fourth order standardized moment of the channel input distribution, also known as kurtosis. Probabilistically-shaped inputs optimized for the linear Gaussian channel have a Gaussian-like distribution with high kurtosis. For optical channels, this leads to an increase in NLI power a…
▽ More
Nonlinear interference (NLI) generated during the propagation of an optical waveform through the fiber depends on the fourth order standardized moment of the channel input distribution, also known as kurtosis. Probabilistically-shaped inputs optimized for the linear Gaussian channel have a Gaussian-like distribution with high kurtosis. For optical channels, this leads to an increase in NLI power and consequently, a decrease in effective signal-to-noise ratio (SNR). In this work, we propose kurtosis-limited enumerative sphere shaping (K-ESS) as an algorithm to generate low-kurtosis shaped inputs. Numerical simulations at a shaping blocklength of 108 amplitudes demonstrate that with K-ESS, it is possible to increase the effective SNRs by 0.4 dB in a single-span single-channel scenario at 400 Gbit/s. K-ESS offers also a twofold decrease in frame error rate with respect to Gaussian-channel-optimal sphere shaping.
△ Less
Submitted 14 October, 2021; v1 submitted 31 May, 2021;
originally announced May 2021.
-
On Parameter Optimization and Reach Enhancement for the Improved Soft-Aided Staircase Decoder
Authors:
Yi Lei,
Bin Chen,
Gabriele Liga,
Alex Alvarado
Abstract:
The so-called improved soft-aided bit-marking algorithm was recently proposed for staircase codes (SCCs) in the context of fiber optical communications. This algorithm is known as iSABM-SCC. With the help of channel soft information, the iSABM-SCC decoder marks bits via thresholds to deal with both miscorrections and failures of hard-decision (HD) decoding. In this paper, we study iSABM-SCC focusi…
▽ More
The so-called improved soft-aided bit-marking algorithm was recently proposed for staircase codes (SCCs) in the context of fiber optical communications. This algorithm is known as iSABM-SCC. With the help of channel soft information, the iSABM-SCC decoder marks bits via thresholds to deal with both miscorrections and failures of hard-decision (HD) decoding. In this paper, we study iSABM-SCC focusing on the parameter optimization of the algorithm and its performance analysis, in terms of the gap to the achievable information rates (AIRs) of HD codes and the fiber reach enhancement. We show in this paper that the marking thresholds and the number of modified component decodings heavily affect the performance of iSABM-SCC, and thus, they need to be carefully optimized. By replacing standard decoding with the optimized iSABM-SCC decoding, the gap to the AIRs of HD codes can be reduced to 0.26-1.02 dB for code rates of 0.74-0.87 in the additive white Gaussian noise channel with 8-ary pulse amplitude modulation. The obtained reach increase is up to 22% for data rates between 401 Gbps and 468 Gbps in an optical fiber channel.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Radar Sensing with OTFS: Embracing ISI and ICI to Surpass the Ambiguity Barrier
Authors:
Musa Furkan Keskin,
Henk Wymeersch,
Alex Alvarado
Abstract:
Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) in high-mobility beyond 5G communications. In this paper, we consider the problem of radar sensing with OTFS joint radar-communications waveform and derive a novel OTFS radar signal model by explicitly taking into account the intersymbol interference (ISI) and inter-carrier interf…
▽ More
Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) in high-mobility beyond 5G communications. In this paper, we consider the problem of radar sensing with OTFS joint radar-communications waveform and derive a novel OTFS radar signal model by explicitly taking into account the intersymbol interference (ISI) and inter-carrier interference (ICI) effects. On the basis of the new model, we show how ISI and ICI phenomena can be turned into an advantage to surpass the maximum unambiguous detection limits in range and velocity, arising in existing OFDM and OTFS radar systems. Moreover, we design a generalized likelihood ratio test based detector/estimator that can embrace ISI and ICI effects. Simulation results illustrate the potential of embracing ISI/ICI and demonstrate its superior detection and estimation performance over conventional baselines.
△ Less
Submitted 1 April, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
A Soft-Aided Staircase Decoder Using Three-Level Channel Reliabilities
Authors:
Yi Lei,
Bin Chen,
Gabriele Liga,
Alexios Balatsoukas-Stimming,
Kaixuan Sun,
Alex Alvarado
Abstract:
The soft-aided bit-marking (SABM) algorithm is based on the idea of marking bits as highly reliable bits (HRBs), highly unreliable bits (HUBs), and uncertain bits to improve the performance of hard-decision (HD) decoders. The HRBs and HUBs are used to assist the HD decoders to prevent miscorrections and to decode those originally uncorrectable cases via bit flipping (BF), respectively. In this pap…
▽ More
The soft-aided bit-marking (SABM) algorithm is based on the idea of marking bits as highly reliable bits (HRBs), highly unreliable bits (HUBs), and uncertain bits to improve the performance of hard-decision (HD) decoders. The HRBs and HUBs are used to assist the HD decoders to prevent miscorrections and to decode those originally uncorrectable cases via bit flipping (BF), respectively. In this paper, an improved SABM algorithm (called iSABM) is proposed for staircase codes (SCCs). Similar to the SABM, iSABM marks bits with the help of channel reliabilities, i.e., using the absolute values of the log-likelihood ratios. The improvements offered by iSABM include: (i) HUBs being classified using a reliability threshold, (ii) BF randomly selecting HUBs, and (iii) soft-aided decoding over multiple SCC blocks. The decoding complexity of iSABM is comparable of that of SABM. This is due to the fact that on the one hand no sorting is required (lower complexity) because of the use of a threshold for HUBs, while on the other hand multiple SCC blocks use soft information (higher complexity). Additional gains of up to 0.53 dB with respect to SABM and 0.91 dB with respect to standard SCC decoding at a bit error rate of $10^{-6}$ are reported. Furthermore, it is shown that using 1-bit reliability marking, i.e., only having HRBs and HUBs, only causes a gain penalty of up to 0.25 dB with a significantly reduced memory requirement.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
Air-to-Ground Directional Channel Sounder With 64-antenna Dual-polarized Cylindrical Array
Authors:
Jorge Gomez Ponce,
Thomas Choi,
Naveed A. Abbasi,
Aldo Adame,
Alexander Alvarado,
Colton Bullard,
Ruiyi Shen,
Fred Daneshgaran,
Harpreet S. Dhillon,
Andreas F. Molisch
Abstract:
Unmanned Aerial Vehicles (UAVs), popularly called drones, are an important part of future wireless communications, either as user equipment that needs communication with a ground station, or as base station in a 3D network. For both the analysis of the "useful" links, and for investigation of possible interference to other ground-based nodes, an understanding of the air-to-ground channel is requir…
▽ More
Unmanned Aerial Vehicles (UAVs), popularly called drones, are an important part of future wireless communications, either as user equipment that needs communication with a ground station, or as base station in a 3D network. For both the analysis of the "useful" links, and for investigation of possible interference to other ground-based nodes, an understanding of the air-to-ground channel is required. Since ground-based nodes often are equipped with antenna arrays, the channel investigations need to account for it. This study presents a massive MIMO-based air-to-ground channel sounder we have recently developed in our lab, which can perform measurements for the aforementioned requirements. After outlining the principle and functionality of the sounder, we present sample measurements that demonstrate the capabilities, and give first insights into air-to-ground massive MIMO channels in an urban environment. Our results provide a platform for future investigations and possible enhancements of massive MIMO systems.
△ Less
Submitted 13 February, 2021;
originally announced March 2021.
-
Frequency Logarithmic Perturbation on the Group-Velocity Dispersion Parameter with Applications to Passive Optical Networks
Authors:
Vinícius Oliari,
Erik Agrell,
Gabriele Liga,
Alex Alvarado
Abstract:
Signal propagation in an optical fiber can be described by the nonlinear Schrödinger equation (NLSE). The NLSE has no known closed-form solution, mostly due to the interaction of dispersion and nonlinearities. In this paper, we present a novel closed-form approximate model for the nonlinear optical channel, with applications to passive optical networks. The proposed model is derived using logarith…
▽ More
Signal propagation in an optical fiber can be described by the nonlinear Schrödinger equation (NLSE). The NLSE has no known closed-form solution, mostly due to the interaction of dispersion and nonlinearities. In this paper, we present a novel closed-form approximate model for the nonlinear optical channel, with applications to passive optical networks. The proposed model is derived using logarithmic perturbation in the frequency domain on the group-velocity dispersion (GVD) parameter of the NLSE. The model can be seen as an improvement of the recently proposed regular perturbation (RP) on the GVD parameter. RP and logarithmic perturbation (LP) on the nonlinear coefficient have already been studied in the literature, and are hereby compared with RP on the GVD parameter and the proposed LP model. As an application of the model, we focus on passive optical networks. For a 20 km PON at 10 Gbaud, the proposed model improves upon LP on the nonlinear coefficient by 1.5 dB. For the same system, a detector based on the proposed LP model reduces the uncoded bit-error-rate by up to 5.4 times at the same input power or reduces the input power by 0.4 dB at the same information rate.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Temporal Energy Analysis of Symbol Sequences for Fiber Nonlinear Interference Modelling via Energy Dispersion Index
Authors:
Kaiquan Wu,
Gabriele Liga,
Alireza Sheikh,
Frans M. J. Willems,
Alex Alvarado
Abstract:
The stationary statistical properties of independent, identically distributed (i.i.d.) input symbols provide insights on the induced nonlinear interference (NLI) during fiber transmission. For example, kurtosis is known to predict the modulation format-dependent NLI. These statistical properties can be used in the design of probabilistic amplitude shaping (PAS), which is a popular scheme that reli…
▽ More
The stationary statistical properties of independent, identically distributed (i.i.d.) input symbols provide insights on the induced nonlinear interference (NLI) during fiber transmission. For example, kurtosis is known to predict the modulation format-dependent NLI. These statistical properties can be used in the design of probabilistic amplitude shaping (PAS), which is a popular scheme that relies on an amplitude shaper for increasing spectral efficiencies of fiber-optic systems. One property of certain shapers used in PAS -- including constant-composition distribution matchers -- that is often overlooked is that a time-dependency between amplitudes is introduced. This dependency results in symbols that are non-i.i.d., which have time-varying statistical properties. Somewhat surprisingly, the effective signal-to-noise ratio (SNR) in PAS has been shown to increase when the shaping blocklength decreases. This blocklength dependency of SNR has been attributed to time-varying statistical properties of the symbol sequences, in particular, to variation of the symbol energies. In this paper, we investigate the temporal energy behavior of symbol sequences, and introduce a new metric called energy dispersion index (EDI). EDI captures the time-varying statistical properties of symbol energies. Numerical results show strong correlations between EDI and effective SNR, with absolute correlation coefficients above 99% for different transmission distances.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Performance Prediction Recipes for Optical Links
Authors:
Erik Agrell,
Marco Secondini,
Alex Alvarado,
Tsuyoshi Yoshida
Abstract:
Although forward error-correction (FEC) coding is an essential part of modern fiber-optic communication systems, it is impractical to implement and evaluate FEC in transmission experiments and simulations. Therefore, it is desirable to accurately predict the end-to-end link performance including FEC from transmission data recorded without FEC. In this tutorial, we provide ready-to-implement "recip…
▽ More
Although forward error-correction (FEC) coding is an essential part of modern fiber-optic communication systems, it is impractical to implement and evaluate FEC in transmission experiments and simulations. Therefore, it is desirable to accurately predict the end-to-end link performance including FEC from transmission data recorded without FEC. In this tutorial, we provide ready-to-implement "recipes" for such prediction techniques, which apply to arbitrary channels and require no knowledge of information or coding theory. The appropriate choice of recipe depends on properties of the FEC encoder and decoder. The covered metrics include bit error rate, symbol error rate, achievable information rate, and asymptotic information, in all cases computed using a mismatched receiver. Supplementary software implementations are available.
△ Less
Submitted 30 April, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
Modeling of Nonlinear Interference Power for Dual-Polarization 4D Formats
Authors:
Gabriele Liga,
Bin Chen,
Astrid Barreiro,
Alex Alvarado
Abstract:
We assess the accuracy of a recently introduced nonlinear interference model for general dual-polarization 4D formats.~ Unlike previous models for polarization-multiplexed 2D formats, an average gap from split-step Fourier simulations within 0.1 dB is demonstrated.
We assess the accuracy of a recently introduced nonlinear interference model for general dual-polarization 4D formats.~ Unlike previous models for polarization-multiplexed 2D formats, an average gap from split-step Fourier simulations within 0.1 dB is demonstrated.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
Model-Based Machine Learning for Joint Digital Backpropagation and PMD Compensation
Authors:
Rick M. Bütler,
Christian Häger,
Henry D. Pfister,
Gabriele Liga,
Alex Alvarado
Abstract:
In this paper, we propose a model-based machine-learning approach for dual-polarization systems by parameterizing the split-step Fourier method for the Manakov-PMD equation. The resulting method combines hardware-friendly time-domain nonlinearity mitigation via the recently proposed learned digital backpropagation (LDBP) with distributed compensation of polarization-mode dispersion (PMD). We refer…
▽ More
In this paper, we propose a model-based machine-learning approach for dual-polarization systems by parameterizing the split-step Fourier method for the Manakov-PMD equation. The resulting method combines hardware-friendly time-domain nonlinearity mitigation via the recently proposed learned digital backpropagation (LDBP) with distributed compensation of polarization-mode dispersion (PMD). We refer to the resulting approach as LDBP-PMD. We train LDBP-PMD on multiple PMD realizations and show that it converges within 1% of its peak dB performance after 428 training iterations on average, yielding a peak effective signal-to-noise ratio of only 0.30 dB below the PMD-free case. Similar to state-of-the-art lumped PMD compensation algorithms in practical systems, our approach does not assume any knowledge about the particular PMD realization along the link, nor any knowledge about the total accumulated PMD. This is a significant improvement compared to prior work on distributed PMD compensation, where knowledge about the accumulated PMD is typically assumed. We also compare different parameterization choices in terms of performance, complexity, and convergence behavior. Lastly, we demonstrate that the learned models can be successfully retrained after an abrupt change of the PMD realization along the fiber.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Nonlinear Interference Analysis of Probabilistic Shaping vs. 4D Geometrically Shaped Formats
Authors:
Bin Chen,
Chigo Okonkwo,
Alex Alvarado
Abstract:
Performance trade-offs between linear shaping and nonlinear tolerance of the recently introduced 4D orthant-symmetric 128-ary modulation format are investigated. Numerical simulations show 9.3% reach increase with respect to the 7b4D-2A8PSK format and probabilistically-shaped 16QAM with short blocklength.
Performance trade-offs between linear shaping and nonlinear tolerance of the recently introduced 4D orthant-symmetric 128-ary modulation format are investigated. Numerical simulations show 9.3% reach increase with respect to the 7b4D-2A8PSK format and probabilistically-shaped 16QAM with short blocklength.
△ Less
Submitted 18 October, 2020;
originally announced October 2020.
-
Comparison of Short Blocklength Sphere Shaping and Nonlinearity Compensation in WDM Systems
Authors:
Abdelkerim Amari,
Lutz Lampe,
O. S. Sunish Kumar,
Yunus Can Gultekin,
Alex Alvarado
Abstract:
In optical communication systems, short blocklength probabilistic enumerative sphere shaping (ESS) provides both linear shaping gain and nonlinear tolerance. In this work, we investigate the performance and complexity of ESS in comparison with fiber nonlinearity compensation via digital back propagation (DBP) with different steps per span. We evaluate the impact of the shaping blocklength in terms…
▽ More
In optical communication systems, short blocklength probabilistic enumerative sphere shaping (ESS) provides both linear shaping gain and nonlinear tolerance. In this work, we investigate the performance and complexity of ESS in comparison with fiber nonlinearity compensation via digital back propagation (DBP) with different steps per span. We evaluate the impact of the shaping blocklength in terms of nonlinear tolerance and also consider the case of ESS with a Volterra-based nonlinear equalizer (VNLE), which provides lower complexity than DBP. In single-channel transmission, ESS with VNLE achieves similar performance in terms of finite length bit-metric decoding rate to uniform signaling with one step per span DBP. In the context of a dense wavelength-division multiplexing (WDM) transmission system, we show that ESS outperforms uniform signaling with DBP for different step sizes.
△ Less
Submitted 10 October, 2020;
originally announced October 2020.
-
Analytical Modeling of Nonlinear Fiber Propagation for Four Dimensional Symmetric Constellations
Authors:
Hami Rabbani,
Mostafa Ayaz,
Lotfollah Beygi,
Gabriele Liga,
Alex Alvarado,
Erik Agrell,
Magnus Karlsson
Abstract:
Coherent optical transmission systems naturally lead to a four dimensional (4D) signal space, i.e., two polarizations each with two quadratures. In this paper we derive an analytical model to quantify the impact of Kerr nonlinearity on such 4Dspaces, taking the interpolarization dependency into account. This is in contrast to previous models such as the GN and EGN models, which are valid for polar…
▽ More
Coherent optical transmission systems naturally lead to a four dimensional (4D) signal space, i.e., two polarizations each with two quadratures. In this paper we derive an analytical model to quantify the impact of Kerr nonlinearity on such 4Dspaces, taking the interpolarization dependency into account. This is in contrast to previous models such as the GN and EGN models, which are valid for polarization multiplexed (PM)formats, where the two polarizations are seen as independent channels on which data is multiplexed. The proposed model agrees with the EGN model in the special case of independent two-dimensional modulation in each polarization. The model accounts for the predominant nonlinear terms in a WDM system, namely self-phase modulation and and cross-phase modulation. Numerical results show that the EGN model may inaccurately estimate the nonlinear interference of 4D formats. This nonlinear interference discrepancy between the results of the proposed model and the EGN model could be up to 2.8 dB for a system with 80 WDM channels. The derived model is validated by split-step Fourier simulations, and it is shown to follow simulations very closely.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Extending fibre nonlinear interference power modelling to account for general dual-polarisation 4D modulation formats
Authors:
Gabriele Liga,
Astrid Barreiro,
Hami Rabbani,
Alex Alvarado
Abstract:
In optical communications, four-dimensional (4D) modulation formats encode information onto the quadrature components of two arbitrary orthogonal states of polarisation of the optical field. These formats have recently regained attention due their potential power efficiency, nonlinearity tolerance, and ultimately to their still unexplored shaping gains. As in the fibre-optic channel the shaping ga…
▽ More
In optical communications, four-dimensional (4D) modulation formats encode information onto the quadrature components of two arbitrary orthogonal states of polarisation of the optical field. These formats have recently regained attention due their potential power efficiency, nonlinearity tolerance, and ultimately to their still unexplored shaping gains. As in the fibre-optic channel the shaping gain is closely related to the nonlinearity tolerance of a given modulation format, predicting the effect of nonlinearity is key to effectively optimise the transmitted constellation. Many analytical models available in the optical communication literature allow, within a first-order perturbation framework, the computation of the average power of the nonlinear interference (NLI) accumulated in coherent fibre-optic transmission systems. However, all current models only operate under the assumption of a transmitted polarisation-multiplexed, two-dimensional (PM-2D) modulation format. PM-2D formats represent a limited subset of the possible dual-polarisation 4D formats, namely, only those where data transmitted on each polarisation channel are mutually independent and identically distributed. This document presents a step-by-step mathematical derivation of the extension of existing NLI models to the class of arbitrary dual-polarisation 4D modulation formats. In particular, the methodology adopted follows the one of the popular enhanced Gaussian noise model, albeit dropping most assumptions on the geometry and statistic of the transmitted 4D modulation format. The resulting expressions show that, whilst in the PM-2D case the NLI power depends only on different statistical high-order moments of each polarisation component, for a general 4D constellation also several others cross-polarisation correlations need to be taken into account.
△ Less
Submitted 14 September, 2020; v1 submitted 25 August, 2020;
originally announced August 2020.
-
Novel High-Throughput Decoding Algorithms for Product and Staircase Codes based on Error-and-Erasure Decoding
Authors:
Alireza Sheikh,
Alexandre Graell i Amat,
Alex Alvarado
Abstract:
Product codes (PCs) and staircase codes (SCCs) are conventionally decoded based on bounded distance decoding (BDD) of the component codes and iterating between row and column decoders. The performance of iterative BDD (iBDD) can be improved using soft-aided (hybrid) algorithms. Among these, iBDD with combined reliability (iBDD-CR) has been recently proposed for PCs, yielding sizeable performance g…
▽ More
Product codes (PCs) and staircase codes (SCCs) are conventionally decoded based on bounded distance decoding (BDD) of the component codes and iterating between row and column decoders. The performance of iterative BDD (iBDD) can be improved using soft-aided (hybrid) algorithms. Among these, iBDD with combined reliability (iBDD-CR) has been recently proposed for PCs, yielding sizeable performance gains at the expense of a minor increase in complexity compared to iBDD. In this paper, we first extend iBDD-CR to SCCs. We then propose two novel decoding algorithms for PCs and SCCs which improve upon iBDD-CR. The new algorithms use an extra decoding attempt based on error and erasure decoding of the component codes. The proposed algorithms require only the exchange of hard messages between component decoders, making them an attractive solution for ultra high-throughput fiber-optic systems. Simulation results show that our algorithms based on two decoding attempts achieve gains of up to $0.88$ dB for both PCs and SCCs. This corresponds to a $33\%$ optical reach enhancement over iBDD with bit-interleaved coded modulation using $256$ quadrature amplitude modulation.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Revisiting Efficient Multi-Step Nonlinearity Compensation with Machine Learning: An Experimental Demonstration
Authors:
Vinícius Oliari,
Sebastiaan Goossens,
Christian Häger,
Gabriele Liga,
Rick M. Bütler,
Menno van den Hout,
Sjoerd van der Heide,
Henry D. Pfister,
Chigo Okonkwo,
Alex Alvarado
Abstract:
Efficient nonlinearity compensation in fiber-optic communication systems is considered a key element to go beyond the "capacity crunch''. One guiding principle for previous work on the design of practical nonlinearity compensation schemes is that fewer steps lead to better systems. In this paper, we challenge this assumption and show how to carefully design multi-step approaches that provide bette…
▽ More
Efficient nonlinearity compensation in fiber-optic communication systems is considered a key element to go beyond the "capacity crunch''. One guiding principle for previous work on the design of practical nonlinearity compensation schemes is that fewer steps lead to better systems. In this paper, we challenge this assumption and show how to carefully design multi-step approaches that provide better performance--complexity trade-offs than their few-step counterparts. We consider the recently proposed learned digital backpropagation (LDBP) approach, where the linear steps in the split-step method are re-interpreted as general linear functions, similar to the weight matrices in a deep neural network. Our main contribution lies in an experimental demonstration of this approach for a 25 Gbaud single-channel optical transmission system. It is shown how LDBP can be integrated into a coherent receiver DSP chain and successfully trained in the presence of various hardware impairments. Our results show that LDBP with limited complexity can achieve better performance than standard DBP by using very short, but jointly optimized, finite-impulse response filters in each step. This paper also provides an overview of recently proposed extensions of LDBP and we comment on potentially interesting avenues for future work.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Refined Reliability Combining for Binary Message Passing Decoding of Product Codes
Authors:
Alireza Sheikh,
Alexandre Graell i Amat,
Gianluigi Liva,
Alex Alvarado
Abstract:
We propose a novel soft-aided iterative decoding algorithm for product codes (PCs). The proposed algorithm, named iterative bounded distance decoding with combined reliability (iBDD-CR), enhances the conventional iterative bounded distance decoding (iBDD) of PCs by exploiting some level of soft information. In particular, iBDD-CR can be seen as a modification of iBDD where the hard decisions of th…
▽ More
We propose a novel soft-aided iterative decoding algorithm for product codes (PCs). The proposed algorithm, named iterative bounded distance decoding with combined reliability (iBDD-CR), enhances the conventional iterative bounded distance decoding (iBDD) of PCs by exploiting some level of soft information. In particular, iBDD-CR can be seen as a modification of iBDD where the hard decisions of the row and column decoders are made based on a reliability estimate of the BDD outputs. The reliability estimates are derived using extrinsic message passing for generalized low-density-parity check (GLDPC) ensembles, which encompass PCs. We perform a density evolution analysis of iBDD-CR for transmission over the additive white Gaussian noise channel for the GLDPC ensemble. We consider both binary transmission and bit-interleaved coded modulation with quadrature amplitude modulation.We show that iBDD-CR achieves performance gains up to $0.51$ dB compared to iBDD with the same internal decoder data flow. This makes the algorithm an attractive solution for very high-throughput applications such as fiber-optic communications.
△ Less
Submitted 29 May, 2020;
originally announced June 2020.
-
Minimum depth of double cross product extensions
Authors:
Alberto Hernández Alvarado
Abstract:
In this paper we explore minimum odd and minimum even depth sub algebra pairs in the context of double cross products of finite dimensional Hopf algebras. We start by defining factorization algebras and outline how subring depth in this context relates with the module depth of the regular left module representation of the given subalgebra. Next we study minimum odd depth for double cross product H…
▽ More
In this paper we explore minimum odd and minimum even depth sub algebra pairs in the context of double cross products of finite dimensional Hopf algebras. We start by defining factorization algebras and outline how subring depth in this context relates with the module depth of the regular left module representation of the given subalgebra. Next we study minimum odd depth for double cross product Hopf subalgebras and determine their value in terms of their related module depth, we conclude that minimum odd depth of Drinfeld double Hopf subalgebras is 3. Finaly we produce a necessary and sufficient condition for depth 2 in double cross product Hopf subalgebra extensions. This sufficient condition is then used to prove results regarding minimum depth 2 in Drinfeld double Hopf subalgebras, particularly in the case of finite Group Hopf algebras. Lastly we provide formulas for the centralizer of a normal Hopf subalgebra in a double cross product scenario.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Analysis and Experimental Demonstration of Orthant-Symmetric Four-dimensional 7 bit/4D-sym Modulation for Optical Fiber Communication
Authors:
Bin Chen,
Alex Alvarado,
Sjoerd van der Heide,
Menno van den Hout,
Hartmut Hafermann,
Chigo Okonkwo
Abstract:
We propose a new four-dimensional orthant-symmetric 128-ary modulation format (4D-OS128) with a spectral efficiency of 7bit/4D-sym. The proposed format fills the gap between polarization-multiplexed 8- and 16-ary quadrature-amplitude modulation (PM-8QAM and PM-16QAM).Numerical simulations show that 4D-OS128 outperforms two well-studied 4D geometrically-shaped modulation formats: 128SP-16QAM and 7b…
▽ More
We propose a new four-dimensional orthant-symmetric 128-ary modulation format (4D-OS128) with a spectral efficiency of 7bit/4D-sym. The proposed format fills the gap between polarization-multiplexed 8- and 16-ary quadrature-amplitude modulation (PM-8QAM and PM-16QAM).Numerical simulations show that 4D-OS128 outperforms two well-studied 4D geometrically-shaped modulation formats: 128SP-16QAM and 7b4D-2A8PSK by up to 0.65dB for bit-interleaved coded modulation at the same spectral efficiency. These gains are experimentally demonstrated in a 11$\times$233Gbit/s wavelength division multiplexing (WDM) transmission system operating at 5.95 bit/4D-sym over 6000km and 9000km for both EDFA-only and hybrid amplification scenarios, respectively. A reach increase of 15% is achieved with respect to 128-ary set-partitioning 16QAM. Furthermore, the proposed 4D-OS128 is also compared to $\boldsymbol{D}_4$ lattice-based constellation and probabilistically-shaped 16QAM with finite blocklength via simulation.
△ Less
Submitted 3 February, 2021; v1 submitted 28 March, 2020;
originally announced March 2020.
-
Achievable Information Rates for Probabilistic Amplitude Shaping: An Alternative Approach via Random Sign-Coding Arguments
Authors:
Yunus Can Gültekin,
Alex Alvarado,
Frans M. J. Willems
Abstract:
Probabilistic amplitude shaping (PAS) is a coded modulation strategy in which constellation shaping and channel coding are combined. PAS has attracted considerable attention in both wireless and optical communications. Achievable information rates (AIRs) of PAS have been investigated in the literature using Gallager's error exponent approach. In particular, it has been shown that PAS achieves the…
▽ More
Probabilistic amplitude shaping (PAS) is a coded modulation strategy in which constellation shaping and channel coding are combined. PAS has attracted considerable attention in both wireless and optical communications. Achievable information rates (AIRs) of PAS have been investigated in the literature using Gallager's error exponent approach. In particular, it has been shown that PAS achieves the capacity of the additive white Gaussian noise channel (Böcherer, 2018). In this work, we revisit the capacity-achieving property of PAS and derive AIRs using weak typicality. Our objective is to provide alternative proofs based on random sign-coding arguments that are as constructive as possible. Accordingly, in our proofs, only some signs of the channel inputs are drawn from a random code, while the remaining signs and amplitudes are produced constructively. We consider both symbol-metric and bit-metric decoding.
△ Less
Submitted 12 July, 2020; v1 submitted 24 February, 2020;
originally announced February 2020.
-
Model-Based Machine Learning for Joint Digital Backpropagation and PMD Compensation
Authors:
Christian Häger,
Henry D. Pfister,
Rick M. Bütler,
Gabriele Liga,
Alex Alvarado
Abstract:
We propose a model-based machine-learning approach for polarization-multiplexed systems by parameterizing the split-step method for the Manakov-PMD equation. This approach performs hardware-friendly DBP and distributed PMD compensation with performance close to the PMD-free case.
We propose a model-based machine-learning approach for polarization-multiplexed systems by parameterizing the split-step method for the Manakov-PMD equation. This approach performs hardware-friendly DBP and distributed PMD compensation with performance close to the PMD-free case.
△ Less
Submitted 25 January, 2020;
originally announced January 2020.
-
30% Reach Increase via Low-complexity Hybrid HD/SD FEC and Nonlinearity-tolerant 4D Modulation
Authors:
Gabriele Liga,
Bin Chen,
Sjoerd van der Heide,
Alireza Sheikh,
Menno van der Hout,
Chigo Okonkwo,
Alex Alvarado
Abstract:
Current optical coherent transponders technology is driving data rates towards 1 Tb/s/λand beyond. This trend requires both high-performance coded modulation schemes and efficient implementation of the forward-error-correction (FEC) decoder. A possible solution to this problem is combining advanced multidimensional modulation formats with low-complexity hybrid HD/SD FEC decoders. Following this ra…
▽ More
Current optical coherent transponders technology is driving data rates towards 1 Tb/s/λand beyond. This trend requires both high-performance coded modulation schemes and efficient implementation of the forward-error-correction (FEC) decoder. A possible solution to this problem is combining advanced multidimensional modulation formats with low-complexity hybrid HD/SD FEC decoders. Following this rationale, in this paper we combine two recently introduced coded modulation techniques:the geometrically-shaped 4D-64 polarization ring-switched and the soft-aided bit-marking-scaled reliability decoder. This joint scheme enabled us to experimentally demonstrate the transmission of 11x218 Gbit/s channels over transatlantic distances at 5.2bit/4D-sym. Furthermore, a 30% reach increase is demonstrated over PM-8QAM and conventional HD-FEC decoding for product codes.
△ Less
Submitted 31 December, 2019;
originally announced December 2019.
-
End-to-End Learning of Geometrical Shaping Maximizing Generalized Mutual Information
Authors:
Kadir Gümüs,
Alex Alvarado,
Bin Chen,
Christian Häger,
Erik Agrell
Abstract:
GMI-based end-to-end learning is shown to be highly nonconvex. We apply gradient descent initialized with Gray-labeled APSK constellations directly to the constellation coordinates. State-of-the-art constellations in 2D and 4D are found providing reach increases up to 26\% w.r.t. to QAM.
GMI-based end-to-end learning is shown to be highly nonconvex. We apply gradient descent initialized with Gray-labeled APSK constellations directly to the constellation coordinates. State-of-the-art constellations in 2D and 4D are found providing reach increases up to 26\% w.r.t. to QAM.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
Post-FEC BER Benchmarking for Bit-Interleaved Coded Modulation with Probabilistic Shaping
Authors:
Tsuyoshi Yoshida,
Alex Alvarado,
Magnus Karlsson,
Erik Agrell
Abstract:
Accurate performance benchmarking after forward error correction (FEC) decoding is essential for system design in optical fiber communications. Generalized mutual information (GMI) has been shown to be successful at benchmarking the bit-error rate (BER) after FEC decoding (post-FEC BER) for systems with soft-decision (SD) FEC without probabilistic shaping (PS). However, GMI is not relevant to benc…
▽ More
Accurate performance benchmarking after forward error correction (FEC) decoding is essential for system design in optical fiber communications. Generalized mutual information (GMI) has been shown to be successful at benchmarking the bit-error rate (BER) after FEC decoding (post-FEC BER) for systems with soft-decision (SD) FEC without probabilistic shaping (PS). However, GMI is not relevant to benchmark post-FEC BER for systems with SD-FEC and PS. For such systems, normalized GMI (NGMI), asymmetric information (ASI), and achievable FEC rate have been proposed instead. They are good at benchmarking post-FEC BER or to give an FEC limit in bit-interleaved coded modulation (BICM) with PS, but their relation has not been clearly explained so far. In this paper, we define generalized L-values under mismatched decoding, which are connected to the GMI and ASI. We then show that NGMI, ASI, and achievable FEC rate are theoretically equal under matched decoding but not under mismatched decoding. We also examine BER before FEC decoding (pre-FEC BER) and ASI over Gaussian and nonlinear fiber-optic channels with approximately matched decoding. ASI always shows better correlation with post-FEC BER than pre-FEC BER for BICM with PS. On the other hand, post-FEC BER can differ at a given ASI when we change the bit mapping, which describes how each bit in a codeword is assigned to a bit tributary.
△ Less
Submitted 23 April, 2020; v1 submitted 4 November, 2019;
originally announced November 2019.
-
Probabilistic Shaping for Finite Blocklengths: Distribution Matching and Sphere Shaping
Authors:
Yunus Can Gültekin,
Tobias Fehenberger,
Alex Alvarado,
Frans M. J. Willems
Abstract:
In this paper, we provide for the first time a systematic comparison of distribution matching (DM) and sphere shaping (SpSh) algorithms for short blocklength probabilistic amplitude shaping. For asymptotically large blocklengths, constant composition distribution matching (CCDM) is known to generate the target capacity-achieving distribution. As the blocklength decreases, however, the resulting ra…
▽ More
In this paper, we provide for the first time a systematic comparison of distribution matching (DM) and sphere shaping (SpSh) algorithms for short blocklength probabilistic amplitude shaping. For asymptotically large blocklengths, constant composition distribution matching (CCDM) is known to generate the target capacity-achieving distribution. As the blocklength decreases, however, the resulting rate loss diminishes the efficiency of CCDM. We claim that for such short blocklengths and over the additive white Gaussian channel (AWGN), the objective of shaping should be reformulated as obtaining the most energy-efficient signal space for a given rate (rather than matching distributions). In light of this interpretation, multiset-partition DM (MPDM), enumerative sphere shaping (ESS) and shell mapping (SM), are reviewed as energy-efficient shaping techniques. Numerical results show that MPDM and SpSh have smaller rate losses than CCDM. SpSh--whose sole objective is to maximize the energy efficiency--is shown to have the minimum rate loss amongst all. We provide simulation results of the end-to-end decoding performance showing that up to 1 dB improvement in power efficiency over uniform signaling can be obtained with MPDM and SpSh at blocklengths around 200. Finally, we present a discussion on the complexity of these algorithms from the perspective of latency, storage and computations.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
An Improved Model of Nonlinear Fiber Propagation in the Presence of Kerr Nonlinearity and Stimulated Raman Scattering
Authors:
Hami Rabbani,
Gabriele Liga,
Vinicius Oliari,
Lotfollah Beygi,
Erik Agrell,
Magnus Karlsson,
Alex Alvarado
Abstract:
Ultra-wideband fiber optical transmission suffers from both Kerr nonlinearity and stimulated Raman scattering (SRS). Mathematical models that address the interplay between Kerr nonlinearity and SRS exist. These models are based on the Gaussian-noise (GN) and enhanced Gaussian noise (EGN) models. In this paper, we propose a modulation-format-dependent model, accounting for an enhanced link function…
▽ More
Ultra-wideband fiber optical transmission suffers from both Kerr nonlinearity and stimulated Raman scattering (SRS). Mathematical models that address the interplay between Kerr nonlinearity and SRS exist. These models are based on the Gaussian-noise (GN) and enhanced Gaussian noise (EGN) models. In this paper, we propose a modulation-format-dependent model, accounting for an enhanced link function, which is valid for non-identical spans where the fiber span loss and SRS gain/loss are not necessarily compensated for by the amplifier at the end of each span. A new signal power profile is also introduced, comprising the frequency-dependent fiber attenuation. The proposed analytical model takes all terms of nonlinear interference (NLI), including self-channel interference, cross-channel interference, and multi-channel interference, into account. It is also shown that the proposed model has the power to predict the NLI power with greater precision than the previous models can. Split-step Fourier simulations indicate that when both SRS and arbitrary modulation formats are considered, previous models may inaccurately predict the NLI power. This difference could be up to 4.3 dB for a 10.011 THz system with 1001 channels at 10 Gbaud.
△ Less
Submitted 3 December, 2020; v1 submitted 18 September, 2019;
originally announced September 2019.
-
Fiber Nonlinearity Mitigation via the Parzen Window Classifier for Dispersion Managed and Unmanaged Links
Authors:
Abdelkerim Amari,
Xiang Lin,
Octavia A. Dobre,
Ramachandran Venkatesan,
Alex Alvarado
Abstract:
Machine learning techniques have recently received significant attention as promising approaches to deal with the optical channel impairments, and in particular, the nonlinear effects. In this work, a machine learning-based classification technique, known as the Parzen window (PW) classifier, is applied to mitigate the nonlinear effects in the optical channel. The PW classifier is used as a detect…
▽ More
Machine learning techniques have recently received significant attention as promising approaches to deal with the optical channel impairments, and in particular, the nonlinear effects. In this work, a machine learning-based classification technique, known as the Parzen window (PW) classifier, is applied to mitigate the nonlinear effects in the optical channel. The PW classifier is used as a detector with improved nonlinear decision boundaries more adapted to the nonlinear fiber channel. Performance improvement is observed when applying the PW in the context of dispersion managed and dispersion unmanaged systems.
△ Less
Submitted 17 September, 2019;
originally announced September 2019.
-
On Parameter Optimization of Product Codes for Iterative Bounded Distance Decoding with Scaled Reliability
Authors:
Alireza Sheikh,
Alexandre Graell i Amat,
Gianluigi Liva,
Alex Alvarado
Abstract:
We use density evolution to optimize the parameters of binary product codes (PCs) decoded based on the recently introduced iterative bounded distance decoding with scaled reliability. We show that binary PCs with component codes of 3-bit error correcting capability provide the best performance-complexity trade-off.
We use density evolution to optimize the parameters of binary product codes (PCs) decoded based on the recently introduced iterative bounded distance decoding with scaled reliability. We show that binary PCs with component codes of 3-bit error correcting capability provide the best performance-complexity trade-off.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
On Product Codes with Probabilistic Amplitude Shaping for High-Throughput Fiber-Optic Systems
Authors:
Alireza Sheikh,
Alexandre Graell i Amat,
Alex Alvarado
Abstract:
Probabilistic amplitude shaping (PAS) can flexibly vary the spectral efficiency (SE) of fiber-optic systems. In this paper, we demonstrate the application of PAS to bit-wise hard decision decoding (HDD) of product codes (PCs) by finding the necessary conditions to select the PC component codes. We show that PAS with PCs and HDD yields gains up to $2.7$ dB and SE improvement up to approximately…
▽ More
Probabilistic amplitude shaping (PAS) can flexibly vary the spectral efficiency (SE) of fiber-optic systems. In this paper, we demonstrate the application of PAS to bit-wise hard decision decoding (HDD) of product codes (PCs) by finding the necessary conditions to select the PC component codes. We show that PAS with PCs and HDD yields gains up to $2.7$ dB and SE improvement up to approximately $1$ bit/channel use compared to using PCs with uniform signaling and HDD. Furthermore, we employ the recently introduced iterative bounded distance decoding with combined reliability of PCs to improve performance of PAS with PCs and HDD.
△ Less
Submitted 23 July, 2020; v1 submitted 9 August, 2019;
originally announced August 2019.
-
First Experimental Demonstration of Probabilistic Enumerative Sphere Shaping in Optical Fiber Communications
Authors:
Sebastiaan Goossens,
Sjoerd van der Heide,
Menno van den Hout,
Abdelkerim Amari,
Yunus Can Gültekin,
Olga Vassilieva,
Inwoong Kim,
Tadashi Ikeuchi,
Frans M. J. Willems,
Alex Alvarado,
Chigo Okonkwo
Abstract:
We transmit probabilistic enumerative sphere shaped dual-polarization 64-QAM at 350Gbit/s/channel over 1610km SSMF using a short blocklength of 200. A reach increase of 15% over constant composition distribution matching with identical blocklength is demonstrated.
We transmit probabilistic enumerative sphere shaped dual-polarization 64-QAM at 350Gbit/s/channel over 1610km SSMF using a short blocklength of 200. A reach increase of 15% over constant composition distribution matching with identical blocklength is demonstrated.
△ Less
Submitted 19 August, 2019; v1 submitted 1 August, 2019;
originally announced August 2019.
-
Four-dimensional polarization-ring-switching for dispersion-managed optical fibre systems
Authors:
Bin Chen,
Chigo Okonkwo,
Hartmut Hafermann,
Alex Alvarado
Abstract:
The recently introduced 4D 64-ary polarisation-ring-switching format is investigated in dispersion-managed systems. Numerical simulations show a reach increase of $25\%$ with respect to PM-8QAM. This gain is achieved from the nonlinear tolerance of the format and a 4D demapper using correlated noise assumptions.
The recently introduced 4D 64-ary polarisation-ring-switching format is investigated in dispersion-managed systems. Numerical simulations show a reach increase of $25\%$ with respect to PM-8QAM. This gain is achieved from the nonlinear tolerance of the format and a 4D demapper using correlated noise assumptions.
△ Less
Submitted 26 July, 2019;
originally announced July 2019.
-
Improving HD-FEC decoding via bit marking
Authors:
Alex Alvarado,
Gabriele Liga,
Yi Lei,
Bin Chen,
Alexios Balatsoukas-Stimming
Abstract:
We review the recently introduced soft-aided bit-marking (SABM) algorithm and its suitability for product codes. Some aspects of the implementation of the SABM algorithm are discussed. The influence of suboptimal channel soft information is also analyzed.
We review the recently introduced soft-aided bit-marking (SABM) algorithm and its suitability for product codes. Some aspects of the implementation of the SABM algorithm are discussed. The influence of suboptimal channel soft information is also analyzed.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Analysis and Optimisation of Distribution Matching for the Nonlinear Fibre Channel
Authors:
Tobias Fehenberger,
Alex Alvarado
Abstract:
Enhanced Gaussian noise models are used to demonstrate that the per-block SNR after fibre transmission varies significantly due to the variable-composition nature of modern probabilistic shaping schemes. We propose a nonlinearity-optimised distribution matcher that improves the average and worst-case SNR by 0.14 and 0.22 dB, respectively.
Enhanced Gaussian noise models are used to demonstrate that the per-block SNR after fibre transmission varies significantly due to the variable-composition nature of modern probabilistic shaping schemes. We propose a nonlinearity-optimised distribution matcher that improves the average and worst-case SNR by 0.14 and 0.22 dB, respectively.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Enumerative Sphere Shaping for Rate Adaptation and Reach Increase in WDM Transmission Systems
Authors:
Abdelkerim Amari,
Sebastiaan Goossens,
Yunus Can Gultekin,
Olga Vassilieva,
Inwoong Kim,
Tadashi Ikeuchi,
Chigo Okonkwo,
Frans M. J. Willems,
Alex Alvarado
Abstract:
The performance of enumerative sphere shaping (ESS), constant composition distribution matching (CCDM), and uniform signalling are compared at the same forward error correction rate. ESS is shown to offer a reach increase of approximately 10% and 22% compared to CCDM and uniform signalling, respectively.
The performance of enumerative sphere shaping (ESS), constant composition distribution matching (CCDM), and uniform signalling are compared at the same forward error correction rate. ESS is shown to offer a reach increase of approximately 10% and 22% compared to CCDM and uniform signalling, respectively.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
Experimental Demonstration of Eight-dimensional Modulation Formats for Long-haul Optical Transmission
Authors:
Sjoerd van der Heide,
Bin Chen,
Menno van den Hout,
Hartmut Hafermann,
Ton Koonen,
Alex Alvarado,
Chigo Okonkwo
Abstract:
Two novel 5.5 bit/4D modulation formats are experimentally demonstrated to transmit over 9680 km of SSMF. A reach increase of 29.4% over the 6 bit/4D PM-8QAM is shown. Furthermore, increased nonlinear tolerance with respect to PM-8QAM is shown.
Two novel 5.5 bit/4D modulation formats are experimentally demonstrated to transmit over 9680 km of SSMF. A reach increase of 29.4% over the 6 bit/4D PM-8QAM is shown. Furthermore, increased nonlinear tolerance with respect to PM-8QAM is shown.
△ Less
Submitted 2 July, 2019;
originally announced July 2019.
-
A novel soft-aided bit-marking decoder for product codes
Authors:
Gabriele Liga,
Alireza Sheikh,
Alex Alvarado
Abstract:
We introduce a novel soft-aided hard-decision decoder for product codes adopting bit marking via updated reliabilities at each decoding iteration. Gains up to 0.8 dB vs. standard iterative bounded distance decoding and up to 0.3 dB vs. our previously proposed bit-marking decoder are demonstrated.
We introduce a novel soft-aided hard-decision decoder for product codes adopting bit marking via updated reliabilities at each decoding iteration. Gains up to 0.8 dB vs. standard iterative bounded distance decoding and up to 0.3 dB vs. our previously proposed bit-marking decoder are demonstrated.
△ Less
Submitted 24 June, 2019;
originally announced June 2019.
-
11,700 km Transmission at 4.8 bit/4D-sym via Four-dimensional Geometrically-shaped Polarization-Ring-Switching Modulation
Authors:
Sjoerd van der Heide,
Bin Chen,
Menno van den Hout,
Gabriele Liga,
Ton Koonen,
Hartmut Hafermann,
Alex Alvarado,
Chigo Okonkwo
Abstract:
Using a novel geometrically-shaped four-dimensional modulation format, we transmitted 11x200 Gbit/s DWDM at 4.8 bit/4D-sym over 7,925 km and 11,700 km using EDFA-only and hybrid amplification, respectively. A reach increase of 16% is achieved over PM-8QAM.
Using a novel geometrically-shaped four-dimensional modulation format, we transmitted 11x200 Gbit/s DWDM at 4.8 bit/4D-sym over 7,925 km and 11,700 km using EDFA-only and hybrid amplification, respectively. A reach increase of 16% is achieved over PM-8QAM.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Revisiting Multi-Step Nonlinearity Compensation with Machine Learning
Authors:
Christian Häger,
Henry D. Pfister,
Rick M. Bütler,
Gabriele Liga,
Alex Alvarado
Abstract:
For the efficient compensation of fiber nonlinearity, one of the guiding principles appears to be: fewer steps are better and more efficient. We challenge this assumption and show that carefully designed multi-step approaches can lead to better performance-complexity trade-offs than their few-step counterparts.
For the efficient compensation of fiber nonlinearity, one of the guiding principles appears to be: fewer steps are better and more efficient. We challenge this assumption and show that carefully designed multi-step approaches can lead to better performance-complexity trade-offs than their few-step counterparts.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Eight-dimensional Polarization-ring-switching Modulation Formats
Authors:
Bin Chen,
Chigo Okonkwo,
Hartmut Hafermann,
Alex Alvarado
Abstract:
We propose two 8-dimensional (8D) modulation formats (8D-2048PRS-T1 and 8D-2048PRS-T2) with a spectral efficiency of 5.5 bit/4D-sym, where the 8 dimensions are obtained from two time slots and two polarizations. Both formats provide a higher tolerance to nonlinearity by selecting symbols with nonidentical states of polarization (SOPs) in two time slots. The performance of these novel 8D modulation…
▽ More
We propose two 8-dimensional (8D) modulation formats (8D-2048PRS-T1 and 8D-2048PRS-T2) with a spectral efficiency of 5.5 bit/4D-sym, where the 8 dimensions are obtained from two time slots and two polarizations. Both formats provide a higher tolerance to nonlinearity by selecting symbols with nonidentical states of polarization (SOPs) in two time slots. The performance of these novel 8D modulation formats is assessed in terms of the effective signal-to-noise ratio (SNR) and normalized generalized mutual information. 8D-2048PRS-T1 is more suitable for high SNRs, while 8D-2048PRS-T2 is shown to be more tolerant to nonlinearities. A sensitivity improvement of at least 0.25 dB is demonstrated by maximizing normalized generalized mutual information (NGMI). For a long-haul nonlinear optical fiber transmission system, the benefit of mitigating the nonlinearity is demonstrated and a reach increase of 6.7% (560 km) over time-domain hybrid four-dimensional two-amplitude eight-phase shift keying (TDH-4D-2A8PSK) is observed.
△ Less
Submitted 20 September, 2019; v1 submitted 14 April, 2019;
originally announced April 2019.
-
Introducing Enumerative Sphere Shaping for Optical Communication Systems with Short Blocklengths
Authors:
Abdelkerim Amari,
Sebastiaan Goossens,
Yunus Can Gultekin,
Olga Vassilieva,
Inwoong Kim,
Tadashi Ikeuchi,
Chigo Okonkwo,
Frans M. J. Willems,
Alex Alvarado
Abstract:
Probabilistic shaping based on constant composition distribution matching (CCDM) has received considerable attention as a way to increase the capacity of fiber optical communication systems. CCDM suffers from significant rate loss at short blocklengths and requires long blocklengths to achieve high shaping gain, which makes its implementation very challenging. In this paper, we propose to use enum…
▽ More
Probabilistic shaping based on constant composition distribution matching (CCDM) has received considerable attention as a way to increase the capacity of fiber optical communication systems. CCDM suffers from significant rate loss at short blocklengths and requires long blocklengths to achieve high shaping gain, which makes its implementation very challenging. In this paper, we propose to use enumerative sphere shaping (ESS) and investigate its performance for the nonlinear fiber optical channel. ESS has lower rate loss than CCDM at the same shaping rate, which makes it a suitable candidate to be implemented in real-time high-speed optical systems. In this paper, we first show that finite blocklength ESS and CCDM exhibit higher effective signal-to-noise ratio than their infinite blocklength counterparts. These results show that for the nonlinear fiber optical channel, large blocklengths should be avoided. We then show that for a 400 Gb/s dual-polarization 64-QAM WDM transmission system, ESS with short blocklengths outperforms both uniform signaling and CCDM. Gains in terms of both bit-metric decoding rate and bit-error rate are presented. ESS with a blocklength of 200 is shown to provide an extension reach of about 200 km in comparison with CCDM with the same blocklength. The obtained reach increase of ESS with a blocklength of 200 over uniform signaling is approximately 450 km (approximately 19%)
△ Less
Submitted 19 September, 2019; v1 submitted 13 April, 2019;
originally announced April 2019.
-
A Machine Learning-Based Detection Technique for Optical Fiber Nonlinearity Mitigation
Authors:
Abdelkerim Amari,
Xiang Lin,
Octavia A. Dobre,
Ramachandran Venkatesan,
Alex Alvarado
Abstract:
We investigate the performance of a machine learning classification technique, called the Parzen window, to mitigate the fiber nonlinearity in the context of dispersion managed and dispersion unmanaged systems. The technique is applied for detection at the receiver side, and deals with the non-Gaussian nonlinear effects by designing improved decision boundaries. We also propose a two-stage mitigat…
▽ More
We investigate the performance of a machine learning classification technique, called the Parzen window, to mitigate the fiber nonlinearity in the context of dispersion managed and dispersion unmanaged systems. The technique is applied for detection at the receiver side, and deals with the non-Gaussian nonlinear effects by designing improved decision boundaries. We also propose a two-stage mitigation technique using digital back propagation and Parzen window for dispersion unmanaged systems. In this case, digital back propagation compensates for the deterministic nonlinearity and the Parzen window deals with the stochastic nonlinear signal-noise interactions, which are not taken into account by digital back propagation. A performance improvement up to 0:4 dB in terms of Q factor is observed.
△ Less
Submitted 6 March, 2019; v1 submitted 27 February, 2019;
originally announced March 2019.
