Showing 1–12 of 12 results for author: Alonso, T

Deep Reinforcement Learning for MIMO Communication with Low-Resolution ADCs

Authors: Marian Temprana Alonso, Dongsheng Luo, Farhad Shirani

Abstract: Multiple-input multiple-output (MIMO) wireless systems conventionally use high-resolution analog-to-digital converters (ADCs) at the receiver side to faithfully digitize received signals prior to digital signal processing. However, the power consumption of ADCs increases significantly as the bandwidth is increased, particularly in millimeter wave communications systems. A combination of two mitiga… ▽ More Multiple-input multiple-output (MIMO) wireless systems conventionally use high-resolution analog-to-digital converters (ADCs) at the receiver side to faithfully digitize received signals prior to digital signal processing. However, the power consumption of ADCs increases significantly as the bandwidth is increased, particularly in millimeter wave communications systems. A combination of two mitigating approaches has been considered in the literature: i) to use hybrid beamforming to reduce the number of ADCs, and ii) to use low-resolution ADCs to reduce per ADC power consumption. Lowering the number and resolution of the ADCs naturally reduces the communication rate of the system, leading to a tradeoff between ADC power consumption and communication rate. Prior works have shown that optimizing over the hybrid beamforming matrix and ADC thresholds may reduce the aforementioned rate-loss significantly. A key challenge is the complexity of optimization over all choices of beamforming matrices and threshold vectors. This work proposes a reinforcement learning (RL) architecture to perform the optimization. The proposed approach integrates deep neural network-based mutual information estimators for reward calculation with policy gradient methods for reinforcement learning. The approach is robust to dynamic channel statistics and noisy CSI estimates. It is shown theoretically that greedy RL methods converge to the globally optimal policy. Extensive empirical evaluations are provided demonstrating that the performance of the RL-based approach closely matches exhaustive search optimization across the solution space. △ Less

Submitted 26 April, 2025; originally announced April 2025.

Non-Linear Analog Processing Gains in Task-Based Quantization

Authors: Marian Temprana Alonso, Farhad Shirani, Neil Irwin Bernardo, Yonina C. Eldar

Abstract: In task-based quantization, a multivariate analog signal is transformed into a digital signal using a limited number of low-resolution analog-to-digital converters (ADCs). This process aims to minimize a fidelity criterion, which is assessed against an unobserved task variable that is correlated with the analog signal. The scenario models various applications of interest such as channel estimation… ▽ More In task-based quantization, a multivariate analog signal is transformed into a digital signal using a limited number of low-resolution analog-to-digital converters (ADCs). This process aims to minimize a fidelity criterion, which is assessed against an unobserved task variable that is correlated with the analog signal. The scenario models various applications of interest such as channel estimation, medical imaging applications, and object localization. This work explores the integration of analog processing components -- such as analog delay elements, polynomial operators, and envelope detectors -- prior to ADC quantization. Specifically, four scenarios, involving different collections of analog processing operators are considered: (i) arbitrary polynomial operators with analog delay elements, (ii) limited-degree polynomial operators, excluding delay elements, (iii) sequences of envelope detectors, and (iv) a combination of analog delay elements and linear combiners. For each scenario, the minimum achievable distortion is quantified through derivation of computable expressions in various statistical settings. It is shown that analog processing can significantly reduce the distortion in task reconstruction. Numerical simulations in a Gaussian example are provided to give further insights into the aforementioned analog processing gains. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Pressure Ulcers and Dressings: A Strain Sensitivity Analysis of the Boundary Conditions of a Finite Element Model

Authors: Nolwenn Fougeron, Isabelle Rivals, Nathanaël Connesson, Grégory Chagnon, Thierry Alonso, Laurent Pasquinet, Stéphane Auguste, Antoine Perrier, Yohan Payan

Abstract: Recently, a new bi-layer dressing was proposed by Urgo RID to reduce the healing time of pressure ulcers (PU). This dressing was numerically evaluated in previously published work. In the current work, the influence on the maximal shear strains of modelling parameters such as the dressing local geometry, the pressure applied by the gauze inside the wound, the wound deepness, and the mattress stiff… ▽ More Recently, a new bi-layer dressing was proposed by Urgo RID to reduce the healing time of pressure ulcers (PU). This dressing was numerically evaluated in previously published work. In the current work, the influence on the maximal shear strains of modelling parameters such as the dressing local geometry, the pressure applied by the gauze inside the wound, the wound deepness, and the mattress stiffness, was assessed. A sensitivity analysis was performed on these four parameters. Among all experiments, the mean maximal Green--Lagrange shear strain was 0.29. The gauze pressure explained 60% of the model response in terms of the volume of tissues under strains of 0.3, while the wound deepness explained 28%. The mattress had a significant, but low impact, whereas the dressing local geometry had no significant impact. As expected, the wound deepness was one of the most influential parameters. The gauze turned out to be more significant than expected. This may be explained by the large range of values chosen for this study. The results should be extended to more subjects, but still suggest that the gauze is a parameter that might not be neglected. Care should also be taken in clinical practice when using gauze that could have either a positive or negative impact on the soft tissues' strains. This may also depend on the wound deepness. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Journal ref: Biomechanics, 2023, 3 (1), pp.1-12

Non-Linear Analog Processing in MIMO Systems with Coarse Quantization

Authors: Marian Temprana Alonso, Xuyang Liu, Hamidreza Aghasi, Farhad Shirani

Abstract: Analog to digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) receivers in large bandwidth millimeter-wave systems. Prior works have considered two mitigating solutions to reduce the ADC power consumption: i) decreasing the number of ADCs via analog and hybrid beamforming, and ii) decreasing the ADC resolution, i.e., utilizing one-bit… ▽ More Analog to digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) receivers in large bandwidth millimeter-wave systems. Prior works have considered two mitigating solutions to reduce the ADC power consumption: i) decreasing the number of ADCs via analog and hybrid beamforming, and ii) decreasing the ADC resolution, i.e., utilizing one-bit and few-bit ADCs. These mitigating solutions lead to performance loss in terms of achievable rates due to increased quantization error. In this work, the use of nonlinear analog operators such as envelope detectors and polynomial operators, prior to sampling and quantization is considered, as a way to reduce the aforementioned rate-loss. The receiver architecture consists of linear combiners, nonlinear analog operators, and few-bit ADCs. The fundamental performance limits of the resulting communication system, in terms of achievable rates, are investigated under various assumptions on the set of implementable analog operators. Extensive numerical evaluations are provided to evaluate the set of achievable rates and the power consumption of the proposed receiver architectures. Circuit simulations and measurement results, based on both 22 nm FDSOI CMOS technology and 65 nm Bulk CMOS transistor technologies, are provided to justify the power efficiency of the proposed receiver architectures. △ Less

Submitted 23 February, 2025; v1 submitted 12 December, 2022; originally announced December 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2208.04450

Optimal Fault-Tolerant Data Fusion in Sensor Networks: Fundamental Limits and Efficient Algorithms

Authors: Marian Temprana Alonso, Farhad Shirani, S. Sitharama Iyengar

Abstract: Distributed estimation in the context of sensor networks is considered, where distributed agents are given a set of sensor measurements, and are tasked with estimating a target variable. A subset of sensors are assumed to be faulty. The objective is to minimize i) the mean square estimation error at each node (accuracy objective), and ii) the mean square distance between the estimates at each pair… ▽ More Distributed estimation in the context of sensor networks is considered, where distributed agents are given a set of sensor measurements, and are tasked with estimating a target variable. A subset of sensors are assumed to be faulty. The objective is to minimize i) the mean square estimation error at each node (accuracy objective), and ii) the mean square distance between the estimates at each pair of nodes (consensus objective). It is shown that there is an inherent tradeoff between the former and latter objectives. Assuming a general stochastic model, the sensor fusion algorithm optimizing this tradeoff is characterized through a computable optimization problem, and a Cramer-Rao type lower bound for the achievable accuracy-consensus loss is obtained. Finding the optimal sensor fusion algorithm is computationally complex. To address this, a general class of low-complexity Brooks-Iyengar Algorithms are introduced, and their performance, in terms of accuracy and consensus objectives, is compared to that of optimal linear estimators through case study simulations of various scenarios. △ Less

Submitted 22 December, 2022; v1 submitted 8 October, 2022; originally announced October 2022.

Geometric optimization of non-equilibrium adiabatic thermal machines and implementation in a qubit system

Authors: Pablo Terren Alonso, Paolo Abiuso, Marti Perarnau-Llobet, Liliana Arrachea

Abstract: We adopt a geometric approach to describe the performance of adiabatic quantum machines, operating under slow time-dependent driving and in contact to two or more reservoirs with a temperature bias during all the cycle. We show that the problem of optimizing the power generation of a heat engine and the efficiency of both the heat engine and refrigerator operational modes is reduced to an isoperim… ▽ More We adopt a geometric approach to describe the performance of adiabatic quantum machines, operating under slow time-dependent driving and in contact to two or more reservoirs with a temperature bias during all the cycle. We show that the problem of optimizing the power generation of a heat engine and the efficiency of both the heat engine and refrigerator operational modes is reduced to an isoperimetric problem with non-trivial underlying metrics and curvature. This corresponds to the maximization of the ratio between the area enclosed by a closed curve and its corresponding length. We illustrate this procedure in a qubit coupled to two reservoirs operating as a thermal machine by means of an adiabatic protocol. △ Less

Submitted 21 December, 2021; v1 submitted 26 September, 2021; originally announced September 2021.

Comments: 16 pages, 11 figures

Journal ref: PRX Quantum 3 (2021) 010326

Memory-Efficient Dataflow Inference for Deep CNNs on FPGA

Authors: Lucian Petrica, Tobias Alonso, Mairin Kroes, Nicholas Fraser, Sorin Cotofana, Michaela Blott

Abstract: Custom dataflow Convolutional Neural Network (CNN) inference accelerators on FPGA are tailored to a specific CNN topology and store parameters in On-Chip Memory (OCM), resulting in high energy efficiency and low inference latency. However, in these accelerators the shapes of parameter memories are dictated by throughput constraints and do not map well to the underlying OCM, which becomes an implem… ▽ More Custom dataflow Convolutional Neural Network (CNN) inference accelerators on FPGA are tailored to a specific CNN topology and store parameters in On-Chip Memory (OCM), resulting in high energy efficiency and low inference latency. However, in these accelerators the shapes of parameter memories are dictated by throughput constraints and do not map well to the underlying OCM, which becomes an implementation bottleneck. In this work, we propose an accelerator design methodology - Frequency Compensated Memory Packing (FCMP) - which improves the OCM utilization efficiency of dataflow accelerators with minimal reduction in throughput and no modifications to the physical structure of FPGA OCM. To validate our methodology, we apply it to several realizations of medium-sized CIFAR-10 inference accelerators and demonstrate up to 30% reduction in OCM utilization without loss of inference throughput, allowing us to port the accelerators from Xilinx Zynq 7020 to 7012S, reducing application cost. We also implement a custom dataflow FPGA inference accelerator for a quantized ResNet-50 CNN, utilizing on-chip weights, the largest topology ever implemented with this accelerator architecture. We demonstrate that by applying FCMP to the ResNet accelerator, the OCM bottleneck is alleviated which enables the accelerator to be ported from Alveo U250 to the smaller Alveo U280 board with less throughput loss compared to alternative techniques. By providing a finer-grained trade off between throughput and OCM requirements, FCMP increases the flexibility of custom dataflow CNN inference designs on FPGA. △ Less

Submitted 14 November, 2020; originally announced November 2020.

Comments: To appear in FPT 2020 proceedings

Detailed study of nonlinear cooling with two-terminal configurations of topological edge states

Authors: Fatemeh Hajiloo, Pablo Terrén Alonso, Nastaran Dashti, Liliana Arrachea, Janine Splettstoesser

Abstract: We study the nonlinear thermoelectric cooling performance of a quantum spin Hall system. The setup consists of a nanomagnet contacting a Kramers' pair of helical edge states, resulting in a transmission probability with a rich structure containing peaks, well-type, and step-type features. We present a detailed analysis of the impact of all these features on the cooling performance, based to a larg… ▽ More We study the nonlinear thermoelectric cooling performance of a quantum spin Hall system. The setup consists of a nanomagnet contacting a Kramers' pair of helical edge states, resulting in a transmission probability with a rich structure containing peaks, well-type, and step-type features. We present a detailed analysis of the impact of all these features on the cooling performance, based to a large extent on analytical results. We analyze the cooling power as well as the coefficient of performance of the device. Since the basic features we study may be present in the transmission function of other mesoscopic conductors, our conclusions provide useful insights to analyze the nonlinear thermoelectric behavior of a wide class of quantum devices. The combination of all these properties define the response of the quantum spin Hall setup, for which we provide some realistic estimates for the conditions limiting and optimizing its operation as a cooling device. △ Less

Submitted 27 September, 2020; v1 submitted 14 July, 2020; originally announced July 2020.

Comments: 19 pages, 18 figures

Journal ref: Phys. Rev. B 102, 155434 (2020)

Geometric properties of adiabatic quantum thermal machines

Authors: Bibek Bhandari, Pablo Terrén Alonso, Fabio Taddei, Felix von Oppen, Rosario Fazio, Liliana Arrachea

Abstract: We present a general unified approach for the study of quantum thermal machines, including both heat engines and refrigerators, operating under periodic adiabatic driving and in contact with thermal reservoirs kept at different temperatures. We show that many observables characterizing this operating mode and the performance of the machine are of geometric nature. Heat-work conversion mechanisms a… ▽ More We present a general unified approach for the study of quantum thermal machines, including both heat engines and refrigerators, operating under periodic adiabatic driving and in contact with thermal reservoirs kept at different temperatures. We show that many observables characterizing this operating mode and the performance of the machine are of geometric nature. Heat-work conversion mechanisms and dissipation of energy can be described, respectively, by the antisymmetric and symmetric components of a thermal geometric tensor defined in the space of time-dependent parameters generalized to include the temperature bias. The antisymmetric component can be identified as a Berry curvature, while the symmetric component defines the metric of the manifold. We show that the operation of adiabatic thermal machines, and consequently also their efficiency, are intimately related to these geometric aspects. We illustrate these ideas by discussing two specific cases: a slowly driven qubit asymmetrically coupled to two bosonic reservoirs kept at different temperatures, and a quantum dot driven by a rotating magnetic field and strongly coupled to electron reservoirs with different polarizations. Both examples are already amenable for an experimental verification. △ Less

Submitted 9 June, 2020; v1 submitted 6 February, 2020; originally announced February 2020.

Comments: 27 pages, 15 figures

Journal ref: Phys. Rev. B 102, 155407 (2020)

Work exchange, geometric magnetization and fluctuation-dissipation relations in a quantum dot under adiabatic magnetoelectric driving

Authors: Pablo Terrén Alonso, Javier Romero, Liliana Arrachea

Abstract: We study the adiabatic dynamics of the charge, spin and energy of a quantum dot with a Coulomb interaction under two-parameter driving, associated to time-dependent gate voltage and magnetic field. The quantum dot is coupled to a single reservoir at temperature $T=0$, hence, the net energy dynamics is fully dissipative. However, in the presence of many-body interactions, other interesting mechanis… ▽ More We study the adiabatic dynamics of the charge, spin and energy of a quantum dot with a Coulomb interaction under two-parameter driving, associated to time-dependent gate voltage and magnetic field. The quantum dot is coupled to a single reservoir at temperature $T=0$, hence, the net energy dynamics is fully dissipative. However, in the presence of many-body interactions, other interesting mechanisms take place, like the net exchange of work between the two types of forces and the non-equilibrium accumulation of charge with different spin orientations. The latter has a geometric nature. The dissipation takes place in the form of an instantaneous Joule law with the universal resistance $R_0=h/2e^2$. We show the relation between this Joule law and instantaneous fluctuation-dissipation relations. The latter lead to generalized Korringa-Shiba relations, valid in the Fermi-liquid regime. △ Less

Submitted 26 March, 2019; v1 submitted 30 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. B 99, 115424 (2019)

Fast and Highly Sensitive Ionic Polymer Gated WS$_2$-Graphene Photodetectors

Authors: Jake D. Mehew, Selim Unal, Elias Torres Alonso, Gareth F. Jones, Saad Fadhil Ramadhan, Monica F. Craciun, Saverio Russo

Abstract: The combination of graphene with semiconductor materials in heterostructure photodetectors, has enabled amplified detection of femtowatt light signals using micron-scale electronic devices. Presently, the speed of such detectors is limited by long-lived charge traps and impractical strategies, e.g. the use of large gate voltage pulses, have been employed to achieve bandwidths suitable for applicat… ▽ More The combination of graphene with semiconductor materials in heterostructure photodetectors, has enabled amplified detection of femtowatt light signals using micron-scale electronic devices. Presently, the speed of such detectors is limited by long-lived charge traps and impractical strategies, e.g. the use of large gate voltage pulses, have been employed to achieve bandwidths suitable for applications, such as video-frame-rate imaging. Here, we report atomically thin graphene-WS$_2$ heterostructure photodetectors encapsulated in an ionic polymer, which are uniquely able to operate at bandwidths up to 1.5 kHz, whilst maintaining internal gain as large as $10^6$. Highly mobile ions and a nanometre scale Debye length of the ionic polymer are used to screen charge traps and tune the Fermi level of graphene over an unprecedented range at the interface with WS$_2$. We observe a responsivity $R=10^6$ A W$^{-1}$ and detectivity $D^*=3.8\times10^{11}$ Jones, approaching that of single photon counters. The combination of both high responsivity and fast response times makes these photodetectors suitable for video-frame-rate imaging applications. △ Less

Submitted 26 April, 2017; v1 submitted 25 April, 2017; originally announced April 2017.

Comments: 10 pages, 4 figures. To appear in Advanced Materials

Homogeneously bright, flexible and foldable lighting devices with functionalised graphene electrodes

Authors: Elias Torres Alonso, George Karkera, Gareth Francis Jones, Monica Felicia Craciun, Saverio Russo

Abstract: Alternating current electroluminescent technology allows the fabrication of large area, flat and flexible lights. Presently the maximum size of a continuous panel is limited by the high resistivity of available transparent electrode materials causing a visible gradient of brightness. Here, we demonstrate that the use of the best known transparent conductor FeCl$_{3}$-intercalated few-layer graphen… ▽ More Alternating current electroluminescent technology allows the fabrication of large area, flat and flexible lights. Presently the maximum size of a continuous panel is limited by the high resistivity of available transparent electrode materials causing a visible gradient of brightness. Here, we demonstrate that the use of the best known transparent conductor FeCl$_{3}$-intercalated few-layer graphene boosts the brightness of electroluminescent devices by 49$\%$ compared to pristine graphene. Intensity gradients observed for high aspect ratio devices are undetectable when using these highly conductive electrodes. Flat lights on polymer substrates are found to be resilient to repeated and flexural strains. △ Less

Submitted 17 June, 2016; originally announced June 2016.

Comments: Published on ACS Materials and Interfaces