-
Simultaneous recovery of a corroded boundary and admittance using the Kohn-Vogelius method
Authors:
Moustapha Essahraoui,
Elmehdi Cherrat,
Lekbir Afraites,
Julius Fergy Tiongson Rabago
Abstract:
We address the problem of identifying an unknown portion $Γ$ of the boundary of a $d$-dimensional ($d \in \{1, 2\}$) domain $Ω$ and its associated Robin admittance coefficient, using two sets of boundary Cauchy data $(f, g)$--representing boundary temperature and heat flux--measured on the accessible portion $Σ$ of the boundary. Identifiability results \cite{Bacchelli2009,PaganiPierotti2009} indic…
▽ More
We address the problem of identifying an unknown portion $Γ$ of the boundary of a $d$-dimensional ($d \in \{1, 2\}$) domain $Ω$ and its associated Robin admittance coefficient, using two sets of boundary Cauchy data $(f, g)$--representing boundary temperature and heat flux--measured on the accessible portion $Σ$ of the boundary. Identifiability results \cite{Bacchelli2009,PaganiPierotti2009} indicate that a single measurement on $Σ$ is insufficient to uniquely determine both $Γ$ and $α$, but two independent inputs yielding distinct solutions ensure the uniqueness of the pair $Γ$ and $α$. In this paper, we propose a cost function based on the energy-gap of two auxiliary problems. We derive the variational derivatives of this objective functional with respect to both the Robin boundary $Γ$ and the admittance coefficient $α$. These derivatives are utilized to develop a nonlinear gradient-based iterative scheme for the simultaneous numerical reconstruction of $Γ$ and $α$. Numerical experiments are presented to demonstrate the effectiveness and practicality of the proposed method.
△ Less
Submitted 24 June, 2025; v1 submitted 22 June, 2025;
originally announced June 2025.
-
Numerical solution by shape optimization method to an inverse shape problem in multi-dimensional advection-diffusion problem with space dependent coefficients
Authors:
Elmehdi Cherrat,
Lekbir Afraites,
Julius Fergy Tiongson Rabago
Abstract:
This work focuses on numerically solving a shape identification problem related to advection-diffusion processes with space-dependent coefficients using shape optimization techniques. Two boundary-type cost functionals are considered, and their corresponding variations with respect to shapes are derived using the adjoint method, employing the chain rule approach. This involves firstly utilizing th…
▽ More
This work focuses on numerically solving a shape identification problem related to advection-diffusion processes with space-dependent coefficients using shape optimization techniques. Two boundary-type cost functionals are considered, and their corresponding variations with respect to shapes are derived using the adjoint method, employing the chain rule approach. This involves firstly utilizing the material derivative of the state system and secondly using its shape derivative. Subsequently, an alternating direction method of multipliers (ADMM) combined with the Sobolev-gradient-descent algorithm is applied to stably solve the shape reconstruction problem. Numerical experiments in two and three dimensions are conducted to demonstrate the feasibility of the methods.
△ Less
Submitted 22 April, 2025; v1 submitted 10 April, 2025;
originally announced April 2025.
-
Boundary shape reconstruction with Robin condition: existence result, stability analysis, and inversion via multiple measurements
Authors:
Lekbir Afraites,
Julius Fergy Tiongson Rabago
Abstract:
This study revisits the problem of identifying the unknown interior Robin boundary of a connected domain using Cauchy data from the exterior region of a harmonic function. It investigates two shape optimization reformulations employing least-squares boundary-data-tracking cost functionals. Firstly, it rigorously addresses the existence of optimal shape solutions, thus filling a gap in the literatu…
▽ More
This study revisits the problem of identifying the unknown interior Robin boundary of a connected domain using Cauchy data from the exterior region of a harmonic function. It investigates two shape optimization reformulations employing least-squares boundary-data-tracking cost functionals. Firstly, it rigorously addresses the existence of optimal shape solutions, thus filling a gap in the literature. The argumentation utilized in the proof strategy is contingent upon the specific formulation under consideration. Secondly, it demonstrates the ill-posed nature of the two shape optimization formulations by establishing the compactness of the Riesz operator associated with the quadratic shape Hessian corresponding to each cost functional. Lastly, the study employs multiple sets of Cauchy data to address the difficulty of detecting concavities in the unknown boundary. Numerical experiments in two and three dimensions illustrate the numerical procedure relying on Sobolev gradients proposed herein.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Detecting immersed obstacle in Stokes fluid flow using the coupled complex boundary method
Authors:
Julius Fergy Tiongson Rabago,
Lekbir Afraites,
Hirofumi Notsu
Abstract:
A non-conventional shape optimization approach is introduced to address the identification of an obstacle immersed in a fluid described by the Stokes equation within a larger bounded domain, relying on boundary measurements on the accessible surface. The approach employs tools from shape optimization, utilizing the coupled complex boundary method to transform the over-specified problem into a comp…
▽ More
A non-conventional shape optimization approach is introduced to address the identification of an obstacle immersed in a fluid described by the Stokes equation within a larger bounded domain, relying on boundary measurements on the accessible surface. The approach employs tools from shape optimization, utilizing the coupled complex boundary method to transform the over-specified problem into a complex boundary value problem by incorporating a complex Robin boundary condition. This condition is derived by coupling the Dirichlet and Neumann boundary conditions along the accessible boundary. The identification of the obstacle involves optimizing a cost function constructed based on the imaginary part of the solution across the entire domain. The subsequent calculation of the shape gradient of this cost function, rigorously performed via the rearrangement method, enables the iterative solution of the optimization problem using a Sobolev gradient descent algorithm. The feasibility of the method is illustrated through numerical experiments in both two and three spatial dimensions, demonstrating its effectiveness in reconstructing obstacles with pronounced concavities under high-level noise-contaminated data, all without perimeter or volume functional penalization.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
A robust alternating direction numerical scheme in a shape optimization setting for solving geometric inverse problems
Authors:
Julius Fergy Tiongson Rabago,
Aissam Hadri,
Lekbir Afraites,
Ahmed S. Hendy,
Mahmoud A. Zaky
Abstract:
The alternating direction method of multipliers within a shape optimization framework is developed for solving geometric inverse problems, focusing on a cavity identification problem from the perspective of non-destructive testing and evaluation techniques. The rationale behind this method is to achieve more accurate detection of unknown inclusions with pronounced concavities, emphasizing the aspe…
▽ More
The alternating direction method of multipliers within a shape optimization framework is developed for solving geometric inverse problems, focusing on a cavity identification problem from the perspective of non-destructive testing and evaluation techniques. The rationale behind this method is to achieve more accurate detection of unknown inclusions with pronounced concavities, emphasizing the aspect of shape optimization. Several numerical results to illustrate the applicability and efficiency of the method are presented for various shape detection problems. These numerical experiments are conducted in both two- and three-dimensional settings, with a focus on cases involving noise-contaminated data. The main finding of the study is that the proposed method significantly outperforms conventional shape optimization methods in reconstructing unknown cavity shapes.
△ Less
Submitted 5 February, 2024; v1 submitted 24 January, 2023;
originally announced January 2023.
-
On second order shape optimization methods for electrical impedance tomography
Authors:
Lekbir Afraites,
Marc Dambrine,
Djalil Kateb
Abstract:
This paper is devoted to the analysis of a second order method for recovering the \emph{a priori} unknown shape of an inclusion $ω$ inside a body $Ω$ from boundary measurement. This inverse problem - known as electrical impedance tomography - has many important practical applications and hence has focussed much attention during the last years. However, to our best knowledge, no work has yet cons…
▽ More
This paper is devoted to the analysis of a second order method for recovering the \emph{a priori} unknown shape of an inclusion $ω$ inside a body $Ω$ from boundary measurement. This inverse problem - known as electrical impedance tomography - has many important practical applications and hence has focussed much attention during the last years. However, to our best knowledge, no work has yet considered a second order approach for this problem. This paper aims to fill that void: we investigate the existence of second order derivative of the state $u$ with respect to perturbations of the shape of the interface $\partialω$, then we choose a cost function in order to recover the geometry of $\partial ω$ and derive the expression of the derivatives needed to implement the corresponding Newton method. We then investigate the stability of the process and explain why this inverse problem is severely ill-posed by proving the compactness of the Hessian at the global minimizer.
△ Less
Submitted 5 April, 2007;
originally announced April 2007.
