-
Analysis on Energy Efficiency of RIS-Assisted Multiuser Downlink Near-Field Communications
Authors:
Wei Wang,
Xiaoyu Ou,
Zhihan Ren,
Waqas Bin Abbas,
Shuping Dang,
Angela Doufexi,
Mark A. Beach
Abstract:
In this paper, we focus on the energy efficiency (EE) optimization and analysis of reconfigurable intelligent surface (RIS)-assisted multiuser downlink near-field communications. Specifically, we conduct a comprehensive study on several key factors affecting EE performance, including the number of RIS elements, the types of reconfigurable elements, reconfiguration resolutions, and the maximum tran…
▽ More
In this paper, we focus on the energy efficiency (EE) optimization and analysis of reconfigurable intelligent surface (RIS)-assisted multiuser downlink near-field communications. Specifically, we conduct a comprehensive study on several key factors affecting EE performance, including the number of RIS elements, the types of reconfigurable elements, reconfiguration resolutions, and the maximum transmit power. To accurately capture the power characteristics of RISs, we adopt more practical power consumption models for three commonly used reconfigurable elements in RISs: PIN diodes, varactor diodes, and radio frequency (RF) switches. These different elements may result in RIS systems exhibiting significantly different energy efficiencies (EEs), even when their spectral efficiencies (SEs) are similar. Considering discrete phases implemented at most RISs in practice, which makes their optimization NP-hard, we develop a nested alternating optimization framework to maximize EE, consisting of an outer integer-based optimization for discrete RIS phase reconfigurations and a nested non-convex optimization for continuous transmit power allocation within each iteration. Extensive comparisons with multiple benchmark schemes validate the effectiveness and efficiency of the proposed framework. Furthermore, based on the proposed optimization method, we analyze the EE performance of RISs across different key factors and identify the optimal RIS architecture yielding the highest EE.
△ Less
Submitted 23 May, 2025;
originally announced May 2025.
-
Deep Learning based Joint Precoder Design and Antenna Selection for Partially Connected Hybrid Massive MIMO Systems
Authors:
Salman Khalid,
Waqas bin Abbas,
Farhan Khalid
Abstract:
Efficient resource allocation with hybrid precoder design is essential for massive MIMO systems operating in millimeter wave (mmW) domain. Owing to a higher energy efficiency and a lower complexity of a partially connected hybrid architecture, in this letter, we propose a joint deep convolutional neural network (CNN) based scheme for precoder design and antenna selection of a partially connected m…
▽ More
Efficient resource allocation with hybrid precoder design is essential for massive MIMO systems operating in millimeter wave (mmW) domain. Owing to a higher energy efficiency and a lower complexity of a partially connected hybrid architecture, in this letter, we propose a joint deep convolutional neural network (CNN) based scheme for precoder design and antenna selection of a partially connected massive MIMO hybrid system. Precoder design and antenna selection is formulated as a regression and classification problem, respectively, for CNN. The channel data is fed to the first CNN network which outputs a subset of selected antennas having the optimal spectral efficiency. This subset is again fed to the second CNN to obtain the block diagonal precoder for a partially connected architecture. Simulation results verifies the superiority of CNN based approach over conventional iterative and alternating minimization (alt-min) algorithms. Moreover, the proposed scheme is computationally efficient and is not very sensitive to channel irregularities.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
User Selection in Millimeter Wave Massive MIMO System using Convolutional Neural Networks
Authors:
Salman Khalid,
Waqas bin Abbas,
Farhan Khalid,
Michele Zorzi
Abstract:
A hybrid architecture for millimeter wave (mmW) massive MIMO systems is considered practically implementable due to low power consumption and high energy efficiency. However, due to the limited number of RF chains, user selection becomes necessary for such architecture. Traditional user selection algorithms suffer from high computational complexity and, therefore, may not be scalable in 5G and bey…
▽ More
A hybrid architecture for millimeter wave (mmW) massive MIMO systems is considered practically implementable due to low power consumption and high energy efficiency. However, due to the limited number of RF chains, user selection becomes necessary for such architecture. Traditional user selection algorithms suffer from high computational complexity and, therefore, may not be scalable in 5G and beyond wireless mobile communications. To address this issue, in this letter we propose a low complexity CNN framework for user selection. The proposed CNN accepts as input the channel matrix and gives as output the selected users. Simulation results show that the proposed CNN performs close to optimal exhaustive search in terms of achievable rate, with negligible computational complexity. In addition, CNN based user selection outperforms the evolutionary algorithm and the greedy algorithm in terms of both achievable rate and computational complexity. Finally, simulation results also show that the proposed CNN based user selection scheme is robust to channel imperfections.
△ Less
Submitted 30 June, 2020;
originally announced June 2020.
-
Millimeter Wave Receiver Comparison Under Energy vs Spectral Efficiency Trade-off
Authors:
Waqas bin Abbas,
Felipe Gomez-Cuba,
Michele Zorzi
Abstract:
Receivers for mmWave systems suffer from high power consumption in Analog to Digital Converters (ADC), and there is a need to compare the three major receiver architectures: Analog, Hybrid and Digital Combining (AC, HC and DC). Moreover, the specific power consumption figure of merit of ADCs varies significantly between different component designs in the literature, so that comparisons performed f…
▽ More
Receivers for mmWave systems suffer from high power consumption in Analog to Digital Converters (ADC), and there is a need to compare the three major receiver architectures: Analog, Hybrid and Digital Combining (AC, HC and DC). Moreover, the specific power consumption figure of merit of ADCs varies significantly between different component designs in the literature, so that comparisons performed for one ADC model - no matter how representative of the state of the art - do not necessarily carry over to other ADC designs with different figures of merit. In this work, we formulate a comparison method between AC, HC and DC that can be easily reproduced with different power consumption parameters and provides all information for receiver architecture selection in a compact chart figure. We also present an interpretation of the receiver selection decision problem as a multi-objective utility optimization to find the best Spectral Efficiency (SE) versus Energy Efficiency (EE) trade-off. We use existing results on the achievable rate of AC, HC and DC systems and an Additive Quantization Noise Model (AQNM) of the ADC capacity degradation. For some example commercial component parameters, we show that the usually held belief that DC requires the highest power is not valid in many cases. Rather, either DC or HC alternatively result in the better SE vs EE trade-off depending strongly on the considered component parameters and on the weight assigned to SE vs EE in the utility maximization.
△ Less
Submitted 28 January, 2019; v1 submitted 30 November, 2018;
originally announced November 2018.
-
Bit Allocation for Increased Power Efficiency in 5G Receivers with Variable-Resolution ADCs
Authors:
Waqas bin Abbas,
Felipe Gomez-Cuba,
Michele Zorzi
Abstract:
In future high-capacity wireless systems based on mmWave or massive multiple input multiple output (MIMO), the power consumption of receiver Analog to Digital Converters (ADC) is a concern. Although hybrid or analog systems with fewer ADCs have been proposed, fully digital receivers with many lower resolution ADCs (and lower power) may be a more versatile solution. In this paper, focusing on an up…
▽ More
In future high-capacity wireless systems based on mmWave or massive multiple input multiple output (MIMO), the power consumption of receiver Analog to Digital Converters (ADC) is a concern. Although hybrid or analog systems with fewer ADCs have been proposed, fully digital receivers with many lower resolution ADCs (and lower power) may be a more versatile solution. In this paper, focusing on an uplink scenario, we propose to take the optimization of ADC resolution one step further by enabling variable resolutions in the ADCs that sample the signal received at each antenna. This allows to give more bits to the antennas that capture the strongest incoming signal and fewer bits to the antennas that capture little signal energy and mostly noise. Simulation results show that, depending on the unquantized link SNR, a power saving in the order of 20-80% can be obtained by our variable resolution proposal in comparison with a reference fully digital receiver with a fixed low number of bits in all its ADCs.
△ Less
Submitted 28 January, 2019; v1 submitted 29 October, 2016;
originally announced October 2016.
-
Millimeter Wave Receiver Efficiency: A Comprehensive Comparison of Beamforming Schemes with Low Resolution ADCs
Authors:
Waqas bin Abbas,
Felipe Gomez-Cuba,
Michele Zorzi
Abstract:
In this work, we study the achievable rate and the energy efficiency of Analog, Hybrid and Digital Combining (AC, HC and DC) for millimeter wave (mmW) receivers. We take into account the power consumption of all receiver components, not just Analog-to-Digital Converters (ADC), determine some practical limitations of beamforming in each architecture, and develop performance analysis charts that ena…
▽ More
In this work, we study the achievable rate and the energy efficiency of Analog, Hybrid and Digital Combining (AC, HC and DC) for millimeter wave (mmW) receivers. We take into account the power consumption of all receiver components, not just Analog-to-Digital Converters (ADC), determine some practical limitations of beamforming in each architecture, and develop performance analysis charts that enable comparison of different receivers simultaneously in terms of two metrics, namely, Spectral Efficiency (SE) and Energy Efficiency (EE). We present a multi-objective utility optimization interpretation to find the best SE-EE weighted trade-off among AC, DC and HC schemes. We consider an Additive Quantization Noise Model (AQNM) to evaluate the achievable rates with low resolution ADCs. Our analysis shows that AC is only advantageous if the channel rank is strictly one, the link has very low SNR, or there is a very stringent low power constraint at the receiver. Otherwise, we show that the usual claim that DC requires the highest power is not universally valid. Rather, either DC or HC alternatively result in the better SE vs EE trade-off depending strongly on the considered power consumption characteristic values for each component of the mmW receiver.
△ Less
Submitted 20 February, 2020; v1 submitted 13 July, 2016;
originally announced July 2016.
-
Context Information Based Initial Cell Search for Millimeter Wave 5G Cellular Networks
Authors:
Waqas Bin Abbas,
Michele Zorzi
Abstract:
Millimeter wave (mmWave) communication is envisioned as a cornerstone to fulfill the data rate requirements for fifth generation (5G) cellular networks. In mmWave communication, beamforming is considered as a key technology to combat the high path-loss, and unlike in conventional microwave communication, beamforming may be necessary even during initial access/cell search. Among the proposed beamfo…
▽ More
Millimeter wave (mmWave) communication is envisioned as a cornerstone to fulfill the data rate requirements for fifth generation (5G) cellular networks. In mmWave communication, beamforming is considered as a key technology to combat the high path-loss, and unlike in conventional microwave communication, beamforming may be necessary even during initial access/cell search. Among the proposed beamforming schemes for initial cell search, analog beamforming is a power efficient approach but suffers from its inherent search delay during initial access. In this work, we argue that analog beamforming can still be a viable choice when context information about mmWave base stations (BS) is available at the mobile station (MS). We then study how the performance of analog beamforming degrades in case of angular errors in the available context information. Finally, we present an analog beamforming receiver architecture that uses multiple arrays of Phase Shifters and a single RF chain to combat the effect of angular errors, showing that it can achieve the same performance as hybrid beamforming.
△ Less
Submitted 6 May, 2016;
originally announced May 2016.
-
Towards an Appropriate Beamforming Scheme for Initial Cell Discovery in mmW 5G Cellular Networks
Authors:
Waqas bin Abbas,
Michele Zorzi
Abstract:
Beamforming is an essential requirement to combat high pathloss and to improve signal-to-noise ratio during initial cell discovery in future millimeter wave cellular networks. The choice of an appropriate beamforming is directly coupled with its energy consumption. The energy consumption is even of more concern at a battery limited mobile station (MS). In this work, we provide an energy consumptio…
▽ More
Beamforming is an essential requirement to combat high pathloss and to improve signal-to-noise ratio during initial cell discovery in future millimeter wave cellular networks. The choice of an appropriate beamforming is directly coupled with its energy consumption. The energy consumption is even of more concern at a battery limited mobile station (MS). In this work, we provide an energy consumption based comparison of different beamforming schemes while considering both a low power and a high power analog-to-digital converter (ADC) for a millimeter wave based receiver at the MS. We analyze both context information (CI) (GPS positioning based) and non context information based schemes, and show that analog beamforming with CI (where mobile station's positioning information is already available) can result in a lower energy consumption, while in all other scenarios digital beamforming has a lower energy consumption than analog and hybrid beamforming. We also show that under certain scenarios recently proposed phase shifters network architecture can result in a lower energy consumption than other beamforming schemes. Moreover, we show that the energy consumption trend among different beamforming schemes is valid irrespective of the number of ADC bits. Finally, we propose a new signaling structure which utilizes a relatively higher frequency sub-carrier for primary synchronization signals compared to other signaling, which allows a further reduction in initial cell search delay and energy consumption of the MS.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Towards an Appropriate Receiver Beamforming Scheme for Millimeter Wave Communication: A Power Consumption Based Comparison
Authors:
Waqas Bin Abbas,
Michele Zorzi
Abstract:
At millimeter wave (mmW) frequencies, beamforming and large antenna arrays are an essential requirement to combat the high path loss for mmW communication. Moreover, at these frequencies, very large bandwidths are available to fulfill the data rate requirements of future wireless networks. However, utilization of these large bandwidths and of large antenna arrays can result in a high power consump…
▽ More
At millimeter wave (mmW) frequencies, beamforming and large antenna arrays are an essential requirement to combat the high path loss for mmW communication. Moreover, at these frequencies, very large bandwidths are available to fulfill the data rate requirements of future wireless networks. However, utilization of these large bandwidths and of large antenna arrays can result in a high power consumption which is an even bigger concern for mmW receiver design. In a mmW receiver, the analog-to-digital converter (ADC) is generally considered as the most power consuming block. In this paper, primarily focusing on the ADC power, we analyze and compare the total power consumption of the complete analog chain for Analog, Digital and Hybrid beamforming (ABF, DBF and HBF) based receiver design. We show how power consumption of these beamforming schemes varies with a change in the number of antennas, the number of ADC bits (b) and the bandwidth (B). Moreover, we compare low power (as in [1]) and high power (as in [2]) ADC models, and show that for a certain range of number of antennas, b and B, DBF may actually have a comparable and lower power consumption than ABF and HBF, respectively. In addition, we also show how the choice of an appropriate beamforming scheme depends on the signal-to-noise ratio regime.
△ Less
Submitted 18 April, 2016;
originally announced April 2016.
