-
The effect of longitudinal debonding on stress redistributions around fiber breaks: Incorporating fiber diameter distribution and fiber misalignment
Authors:
Milad Jafarypouria,
Stepan Lomov,
Sergey Abaimov
Abstract:
This research explores the influence of interfacial debonding between a broken fiber and matrix on stress redistribution surrounding a fiber break within a unidirectional (UD) impregnated fiber bundle, accounting for misalignment of fibers and fiber diameter distribution in randomly packed fiber configurations. Finite-element modelling is conducted on carbon-reinforced epoxy UD bundles with one fi…
▽ More
This research explores the influence of interfacial debonding between a broken fiber and matrix on stress redistribution surrounding a fiber break within a unidirectional (UD) impregnated fiber bundle, accounting for misalignment of fibers and fiber diameter distribution in randomly packed fiber configurations. Finite-element modelling is conducted on carbon-reinforced epoxy UD bundles with one fiber broken for different combinations of the bundle parameters: aligned/misaligned fibers and constant/randomly distributed fiber diameters. Two definitions of stress concentration factor (SCF) are examined, based on average and maximum stress over the fiber cross-section. The study reveals a statistically significant difference for average SCF for misaligned bundles with both constant and variable diameters of fibers compared to the case of aligned bundles of fibers with constant diameter. When the calculated SCFs are incorporated in a bundle strength model, the failure strain of unidirectional composites can be more realistically predicted.
△ Less
Submitted 23 March, 2025;
originally announced March 2025.
-
The effect of variable fibre diameters in unidirectional fibre-reinforced bundles on stress redistributions around fibre breaks
Authors:
Milad Jafarypouria,
Stepan Lomov,
Sergey Abaimov
Abstract:
Finite element modelling is conducted to simulate the stress redistribution around a broken fibre (BF) in a bundle with experimentally measured fibre diameter distributions (FDD), followed by a parametric study of the influence of the FDD coefficient of variation on the stress concentration factor (SCF) and ineffective length (IL). Two variants of the SCF definition are considered: based on averag…
▽ More
Finite element modelling is conducted to simulate the stress redistribution around a broken fibre (BF) in a bundle with experimentally measured fibre diameter distributions (FDD), followed by a parametric study of the influence of the FDD coefficient of variation on the stress concentration factor (SCF) and ineffective length (IL). Two variants of the SCF definition are considered: based on average and maximum stress in the fibre cross-section. Results demonstrate that bigger fibre diameters show higher SCF and clustering of such fibres increases SCF in nearest neighbour fibres (NNFs). Critically, maximum stress-based SCF (maxSCF_max) significantly exceeds average stress-based SCF (maxSCF_avg), with differences about 40 to 75% in NNFs for FDD bundles compared to FCD bundles. This emphasises the necessity of prioritizing maximum stress criteria over conventional average stress models in failure predictions. The findings challenge benchmark models that rely on averaged SCF values, offering critical insights for improving accuracy in predicting fibre break propagation and composite strength.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
Real-Time Cure Monitoring via Carbon Nanotube Networks Enables Mechanical Property Optimization in Post-Cured Epoxy Resins
Authors:
Milad Jafarypouria,
Sergey Abaimov
Abstract:
This research presents a single-walled carbon nanotube (SWCNT)-enabled real-time monitoring system to optimize post-curing conditions (temperature and duration) for epoxy resin. This method can serve as an alternative to traditional methods like Differential Scanning Calorimetry (DSC), which is effective in measuring the degree of cure in polymers during industrial curing (manufacturer-recommended…
▽ More
This research presents a single-walled carbon nanotube (SWCNT)-enabled real-time monitoring system to optimize post-curing conditions (temperature and duration) for epoxy resin. This method can serve as an alternative to traditional methods like Differential Scanning Calorimetry (DSC), which is effective in measuring the degree of cure in polymers during industrial curing (manufacturer-recommended cure cycle). Two different programs using SWCNTs were employed to design the cure cycles for investigating the development of mechanical properties: Program A as the comparison of effects of varied duration of high-temperature curing and Program B as high-temperature curing followed by the varied duration of low-temperature post-curing. By correlating variation in the electrical resistance of SWCNT with curing stages, we illustrate that extending post-curing at 100°C for 24 hours after an initial 3-hour cure at 130°C increases tensile strength by 60% and elongation by 164% compared to industry standards. This approach not only improves mechanical performance but also enables precise, non-destructive cure-state detection, offering a scalable solution for high-performance composites in the aerospace and automotive sectors.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
Near-zero Temperature Coefficient of Resistance for a Single-Walled Carbon Nanotube Polymer Nanocomposite
Authors:
Milad Jafarypouria,
Sergey Abaimov
Abstract:
Temperature dependence of electrical resistance of single-walled carbon nanotube (SWCNTs)/epoxy nanocomposites, which is characterized by a temperature coefficient of resistance (TCR), is experimentally investigated. In the existing literature, there are biased TCR values with non-monotonic temperature dependence, including both negative and positive values. In this study, we demonstrate that the…
▽ More
Temperature dependence of electrical resistance of single-walled carbon nanotube (SWCNTs)/epoxy nanocomposites, which is characterized by a temperature coefficient of resistance (TCR), is experimentally investigated. In the existing literature, there are biased TCR values with non-monotonic temperature dependence, including both negative and positive values. In this study, we demonstrate that the influence of environment temperature can be greatly minimized by ensuring the CNT/epoxy nanocomposite is fully cured along with controlling CNT concentration and selecting an appropriate polymer matrix. In addition, agglomeration of CNTs significantly influences the performance of CNT/polymer nanocomposites. Resistance values remained nearly constant at a CNT concentration of approximately 1 wt.% below the glass transition temperature. It is also observed that in a fully cured CNT/epoxy nanocomposite with the microscale conductive pathway as the main conductance mechanism, the coefficient of thermal expansion (CTE) of the matrix is a critical characteristic, resulting in a consistent increasing trend in TCR.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
Before and After: Machine learning for perioperative patient care
Authors:
Iuliia Ganskaia,
Stanislav Abaimov
Abstract:
For centuries nursing has been known as a job that requires complex manual operations, that cannot be automated or replaced by any machinery. All the devices and techniques have been invented only to support, but never fully replace, a person with knowledge and expert intuition. With the rise of Artificial Intelligence and continuously increasing digital data flow in healthcare, new tools have arr…
▽ More
For centuries nursing has been known as a job that requires complex manual operations, that cannot be automated or replaced by any machinery. All the devices and techniques have been invented only to support, but never fully replace, a person with knowledge and expert intuition. With the rise of Artificial Intelligence and continuously increasing digital data flow in healthcare, new tools have arrived to improve patient care and reduce the labour-intensive work conditions of a nurse.
This cross-disciplinary review aims to build a bridge over the gap between computer science and nursing. It outlines and classifies the methods for machine learning and data processing in patient care before and after the operation. It comprises of Process-, Patient-, Operator-, Feedback-, and Technology-centric classifications. The presented classifications are based on the technical aspects of patient case.
△ Less
Submitted 20 January, 2022;
originally announced January 2022.
-
Towards a Privacy-preserving Deep Learning-based Network Intrusion Detection in Data Distribution Services
Authors:
Stanislav Abaimov
Abstract:
Data Distribution Service (DDS) is an innovative approach towards communication in ICS/IoT infrastructure and robotics. Being based on the cross-platform and cross-language API to be applicable in any computerised device, it offers the benefits of modern programming languages and the opportunities to develop more complex and advanced systems. However, the DDS complexity equally increases its vulne…
▽ More
Data Distribution Service (DDS) is an innovative approach towards communication in ICS/IoT infrastructure and robotics. Being based on the cross-platform and cross-language API to be applicable in any computerised device, it offers the benefits of modern programming languages and the opportunities to develop more complex and advanced systems. However, the DDS complexity equally increases its vulnerability, while the existing security measures are limited to plug-ins and static rules, with the rest of the security provided by third-party applications and operating system. Specifically, traditional intrusion detection systems (IDS) do not detect any anomalies in the publish/subscribe method. With the exponentially growing global communication exchange, securing DDS is of the utmost importance to futureproofing industrial, public, and even personal devices and systems. This report presents an experimental work on the simulation of several specific attacks against DDS, and the application of Deep Learning for their detection. The findings show that even though Deep Learning allows to detect all simulated attacks using only metadata analysis, their detection level varies, with some of the advanced attacks being harder to detect. The limitations imposed by the attempts to preserve privacy significantly decrease the detection rate. The report also reviews the drawbacks and limitations of the Deep Learning approach and proposes a set of selected solutions and configurations, that can further improve the DDS security.
△ Less
Submitted 12 June, 2021;
originally announced June 2021.
-
Influence of carbon nanotubes parameters, boundary conditions, and scaling of the represetative volume on percolation and electric permeability of a nanocomposite
Authors:
N. A. Gudkov,
S. V. Lomov,
I. S. Akhatov,
S. G. Abaimov
Abstract:
The paper aims at the development of a digital twin modelling the electrical conductivity of multi-wall carbon nanotube (MWCNT)/polymer nanocomposite. A comparative analysis is conducted for various formulations of boundary conditions in the representative volume element (RVE) with uniform and isotropic distribution of CNTs. Three types of boundary conditions studied: uniform boundary potentials f…
▽ More
The paper aims at the development of a digital twin modelling the electrical conductivity of multi-wall carbon nanotube (MWCNT)/polymer nanocomposite. A comparative analysis is conducted for various formulations of boundary conditions in the representative volume element (RVE) with uniform and isotropic distribution of CNTs. Three types of boundary conditions studied: uniform boundary potentials for an RVE, uniform boundary potentials for a chain of two RVEs, and periodic boundary potentials. It is demonstrated that to calculate the electrical conductivity of the material correctly, the implementation of periodic boundary conditions for the RVE is required; on the contrary, the use of uniform boundary potentials leads to significant overestimation in conductance. The sensitivity of average conductivity to the RVE size is determined for different volume fractions (Vf) of CNTs. For example, the 5 micrometer size of the RVE is found to be optimal for 1% Vf of CNTs with 50 nm diameter and 5 micrometer average length. Beside the RVE size, we verify how model output changes in response to tuning parameters of the CNT geometry, such as curvature and torsion (twist). We find the presence of the second parameter, torsion, to be imperative for correct conductivity modelling since usage of the curvature alone leads to unavoidable dependence on segment size during CNT discretization. In literature, the influence of intrinsic MWCNT resistivity is often discarded as negligible due to ballistic transport of electrons. To verify this assumption, we check the sensitivity of results to finite resistivity of CNTs. Percolation threshold and the critical index are calculated for different sets of model parameters. The model finite-size effect on the percolation threshold is investigated.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Damage nucleation phenomena: Statistics of times to failure
Authors:
S. G. Abaimov,
A. Roy,
J. P. Cusumano
Abstract:
In this paper we investigate the statistical behavior of an annealed continuous damage model. For different model variations we study distributions of times to failure and compare these results with the classical case of metastable nucleation in statistical mechanics. We show that our model has a tuning parameter which significantly determines the model behavior. Depending on the values of this…
▽ More
In this paper we investigate the statistical behavior of an annealed continuous damage model. For different model variations we study distributions of times to failure and compare these results with the classical case of metastable nucleation in statistical mechanics. We show that our model has a tuning parameter which significantly determines the model behavior. Depending on the values of this tuning parameter, our model exhibits statistical behavior either similar to nucleation of systems in statistical mechanics or an absolutely different type of behavior intrinsic only for systems with damage. This lets us investigate the possible similarities and differences between damage phenomena and classical phenomena of nucleation in statistical mechanics.
△ Less
Submitted 27 October, 2009;
originally announced October 2009.
-
General formalism of non-equilibrium statistical mechanics, a path approach
Authors:
S. G. Abaimov
Abstract:
In this paper we develop a general formalism of a path approach for non-equilibrium statistical mechanics. Firstly, we consider the classical Gibbs approach for states and find that this formalism is ineffective for non-equilibrium phenomena because it is based on a distribution of probabilities indirectly. Secondly, we develop a path formalism which is directly based on the distribution of prob…
▽ More
In this paper we develop a general formalism of a path approach for non-equilibrium statistical mechanics. Firstly, we consider the classical Gibbs approach for states and find that this formalism is ineffective for non-equilibrium phenomena because it is based on a distribution of probabilities indirectly. Secondly, we develop a path formalism which is directly based on the distribution of probabilities and therefore significantly simplifies the analytical approach. The new formalism requires generalizing the 'static', state quantities of a system, like entropy or free energy potential, to their path analogues. Also we obtain a path balance equation and an equation of equilibrium path. For the distribution of probabilities we obtain a functional dependence similar to the Feynman's path integral formalism of action, only now the role of a Hamiltonian is played by the state entropy. For the production of the state free energy we illustrate a significant dependence on the type of system's connectivity.
△ Less
Submitted 24 August, 2009; v1 submitted 31 May, 2009;
originally announced June 2009.
-
Non-equilibrium statistical mechanics of non-equilibrium damage phenomena
Authors:
S. G. Abaimov
Abstract:
In this paper we investigate the applicability of non-equilibrium statistical mechanics to non-equilibrium damage phenomena. As an example, a fiber-bundle model with thermal noise and a fiber-bundle model with decay of fibers are considered. Initially we develop an analogy of the Gibbs formalism for nonequilibrium states. Later we switch from the approach of non-equilibrium states to the approac…
▽ More
In this paper we investigate the applicability of non-equilibrium statistical mechanics to non-equilibrium damage phenomena. As an example, a fiber-bundle model with thermal noise and a fiber-bundle model with decay of fibers are considered. Initially we develop an analogy of the Gibbs formalism for nonequilibrium states. Later we switch from the approach of non-equilibrium states to the approach of non-equilibrium paths. Fluctuating behavior in the system is described in terms of effective temperature parameters. An equation of state and an analog of an energy-balance equation are obtained. Also the formalism of the free energy potential is developed. For fluctuations of paths in the system the statistical distribution is found to be Gaussian.
△ Less
Submitted 24 May, 2009; v1 submitted 3 May, 2009;
originally announced May 2009.
-
Critical behavior of slider-block model
Authors:
S. G. Abaimov
Abstract:
This paper applies the theory of continuous phase transitions of statistical mechanics to a slider-block model. The slider-block model is chosen as a representative of systems with avalanches. Similar behavior can be observed in a forest-fire model and a sand-pile model. Basing on the well-developed theory of critical phenomena for percolating systems a strong analogy for the slider-block model…
▽ More
This paper applies the theory of continuous phase transitions of statistical mechanics to a slider-block model. The slider-block model is chosen as a representative of systems with avalanches. Similar behavior can be observed in a forest-fire model and a sand-pile model. Basing on the well-developed theory of critical phenomena for percolating systems a strong analogy for the slider-block model is investigated. It is found that the slider-block model has a critical point when the stiffness of the model is infinite. Critical exponents are found and it is shown that the behavior of the slider-block model, particularly, the occurrence of system-wide events is strongly dominated by the finite-size effects. Also the unknown before behavior of the frequency-size distributions is found for large statistics of events.
△ Less
Submitted 19 September, 2009; v1 submitted 21 February, 2009;
originally announced February 2009.
-
Sub-critical model of damage evolution as a phase transition
Authors:
S. G. Abaimov
Abstract:
Many studies investigated the application of statistical mechanics to damage phenomena. However, so far the association of damage with statistical mechanics is far from completely developed. One of the most successful approaches maps the strength elements onto the spins of a lattice. This allows applying the formalism extensively developed for spin systems to damage phenomena. To improve the mod…
▽ More
Many studies investigated the application of statistical mechanics to damage phenomena. However, so far the association of damage with statistical mechanics is far from completely developed. One of the most successful approaches maps the strength elements onto the spins of a lattice. This allows applying the formalism extensively developed for spin systems to damage phenomena. To improve the model the interactions of spins at the crack tips are introduced. Further, statistical mechanics of the model is developed for different external boundary constraints.
△ Less
Submitted 28 December, 2009; v1 submitted 8 February, 2009;
originally announced February 2009.
-
Applicability and non-applicability of equilibrium statistical mechanics to non-thermal damage phenomena: II. Spinodal behavior
Authors:
S. G. Abaimov
Abstract:
This paper investigates the spinodal behavior of non-thermal damage phenomena. As an example, a non-thermal fiber-bundle model with the global uniform (meanfield) load sharing is considered. In the vicinity of the spinodal point the power-law scaling behavior is found. For the meanfield fiber-bundle model the spinodal exponents are found to have typical meanfield values.
This paper investigates the spinodal behavior of non-thermal damage phenomena. As an example, a non-thermal fiber-bundle model with the global uniform (meanfield) load sharing is considered. In the vicinity of the spinodal point the power-law scaling behavior is found. For the meanfield fiber-bundle model the spinodal exponents are found to have typical meanfield values.
△ Less
Submitted 26 December, 2008; v1 submitted 3 December, 2008;
originally announced December 2008.
-
Recurrent frequency-size distribution of characteristic events
Authors:
S. G. Abaimov
Abstract:
Many complex systems, including sand-pile models, slider-block models, and earthquakes, have been discussed whether they obey the principles of self-organized criticality. Behavior of these systems can be investigated from two different points of view: interoccurrent behavior in a region and recurrent behavior at a given point on a fault or at a given fault. The interoccurrent frequency-size sta…
▽ More
Many complex systems, including sand-pile models, slider-block models, and earthquakes, have been discussed whether they obey the principles of self-organized criticality. Behavior of these systems can be investigated from two different points of view: interoccurrent behavior in a region and recurrent behavior at a given point on a fault or at a given fault. The interoccurrent frequency-size statistics are known to be scale-invariant and obey the power-law Gutenberg-Richter distribution. This paper investigates the recurrent frequency-size behavior of characteristic events at a given point on a fault or at a given fault. For this purpose sequences of creep events at a creeping section of the San Andreas fault are investigated. The applicability of the Brownian passage-time, lognormal, and Weibull distributions to the recurrent frequency-size statistics of slip events is tested and the Weibull distribution is found to be a best-fit distribution. To verify this result the behaviors of the numerical slider-block and sand-pile models are investigated and the applicability of the Weibull distribution is confirmed. Exponents of the best-fit Weibull distributions for the observed creep event sequences and for the slider-block model are found to have close values from 1.6 to 2.2 with the corresponding aperiodicities of the applied distribution from 0.47 to 0.64.
△ Less
Submitted 15 May, 2008; v1 submitted 4 May, 2008;
originally announced May 2008.
-
Application of classical statistical mechanics to multifractals and dynamical systems
Authors:
S. G. Abaimov
Abstract:
Classical, self-consistent theory of statistical mechanics was developed for the thermodynamic and conservative Hamiltonian systems. Later there were many attempts (Sinai-Bowen-Ruelle's temperature, Tsallis' non-extensive theory) to apply similar formalism to non-Hamiltonian dynamical systems. Although these theories reveal aspects of complex behavior, they have limited applicability. This paper…
▽ More
Classical, self-consistent theory of statistical mechanics was developed for the thermodynamic and conservative Hamiltonian systems. Later there were many attempts (Sinai-Bowen-Ruelle's temperature, Tsallis' non-extensive theory) to apply similar formalism to non-Hamiltonian dynamical systems. Although these theories reveal aspects of complex behavior, they have limited applicability. This paper applies the classical Gibbs-Boltzmann statistical mechanics to complex systems such as i.i.d. processes, multifractals, and non-Hamiltonian dynamical systems with strange attractors. The effective thermolization of stochastic noise in the system is introduced and the formalism of a ruling (governing, free energy) potential is developed.
△ Less
Submitted 3 May, 2008;
originally announced May 2008.
-
Statistical mechanics of damage phenomena
Authors:
S. G. Abaimov
Abstract:
This paper applies the formalism of classical, Gibbs-Boltzmann statistical mechanics to the phenomenon of non-thermal damage. As an example, a non-thermal fiber-bundle model with the global uniform (meanfield) load sharing is considered. Stochastic topological behavior in the system is described in terms of an effective temperature parameter thermalizing the system. An equation of state and a to…
▽ More
This paper applies the formalism of classical, Gibbs-Boltzmann statistical mechanics to the phenomenon of non-thermal damage. As an example, a non-thermal fiber-bundle model with the global uniform (meanfield) load sharing is considered. Stochastic topological behavior in the system is described in terms of an effective temperature parameter thermalizing the system. An equation of state and a topological analog of the energy-balance equation are obtained. The formalism of the free energy potential is developed, and the nature of the first order phase transition and spinodal is demonstrated.
△ Less
Submitted 23 July, 2008; v1 submitted 3 May, 2008;
originally announced May 2008.
